From eaa819409db6ac80fbd7c3d36450b2d1bec93576 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 3 Mar 2015 08:11:01 +0100 Subject: dts: update to v4.0-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/net/nfc/st21nfca.txt | 11 +++++++++-- dts/Bindings/net/nfc/st21nfcb.txt | 4 ++-- 2 files changed, 11 insertions(+), 4 deletions(-) (limited to 'dts/Bindings/net/nfc') diff --git a/dts/Bindings/net/nfc/st21nfca.txt b/dts/Bindings/net/nfc/st21nfca.txt index e4faa2e8df..7bb2e213d6 100644 --- a/dts/Bindings/net/nfc/st21nfca.txt +++ b/dts/Bindings/net/nfc/st21nfca.txt @@ -1,7 +1,7 @@ * STMicroelectronics SAS. ST21NFCA NFC Controller Required properties: -- compatible: Should be "st,st21nfca_i2c". +- compatible: Should be "st,st21nfca-i2c". - clock-frequency: I²C work frequency. - reg: address on the bus - interrupt-parent: phandle for the interrupt gpio controller @@ -11,6 +11,10 @@ Required properties: Optional SoC Specific Properties: - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. +- ese-present: Specifies that an ese is physically connected to the nfc +controller. +- uicc-present: Specifies that the uicc swp signal can be physically +connected to the nfc controller. Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): @@ -20,7 +24,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): st21nfca: st21nfca@1 { - compatible = "st,st21nfca_i2c"; + compatible = "st,st21nfca-i2c"; reg = <0x01>; clock-frequency = <400000>; @@ -29,5 +33,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2): interrupts = <2 IRQ_TYPE_LEVEL_LOW>; enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + + ese-present; + uicc-present; }; }; diff --git a/dts/Bindings/net/nfc/st21nfcb.txt b/dts/Bindings/net/nfc/st21nfcb.txt index 9005608cbb..bb237072db 100644 --- a/dts/Bindings/net/nfc/st21nfcb.txt +++ b/dts/Bindings/net/nfc/st21nfcb.txt @@ -1,7 +1,7 @@ * STMicroelectronics SAS. ST21NFCB NFC Controller Required properties: -- compatible: Should be "st,st21nfcb_i2c". +- compatible: Should be "st,st21nfcb-i2c". - clock-frequency: I²C work frequency. - reg: address on the bus - interrupt-parent: phandle for the interrupt gpio controller @@ -20,7 +20,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): st21nfcb: st21nfcb@8 { - compatible = "st,st21nfcb_i2c"; + compatible = "st,st21nfcb-i2c"; reg = <0x08>; clock-frequency = <400000>; -- cgit v1.2.3