From ebde8820a04dd73a09f50ba84b8cf8ec3773d6ba Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 6 Oct 2017 06:12:41 +0200 Subject: dts: update to v4.14-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/net/phy.txt | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'dts/Bindings/net/phy.txt') diff --git a/dts/Bindings/net/phy.txt b/dts/Bindings/net/phy.txt index b55857696f..77d0b2a61f 100644 --- a/dts/Bindings/net/phy.txt +++ b/dts/Bindings/net/phy.txt @@ -2,11 +2,7 @@ PHY nodes Required properties: - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. + - interrupts : interrupt specifier for the sole interrupt. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - reg : The ID number for the phy, usually a small integer @@ -52,11 +48,16 @@ Optional Properties: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. +- phy-is-integrated: If set, indicates that the PHY is integrated into the same + physical package as the Ethernet MAC. If needed, muxers should be configured + to ensure the integrated PHY is used. The absence of this property indicates + the muxers should be configured so that the external PHY is used. + Example: ethernet-phy@0 { compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; - interrupt-parent = <40000>; - interrupts = <35 1>; + interrupt-parent = <&PIC>; + interrupts = <35 IRQ_TYPE_EDGE_RISING>; reg = <0>; }; -- cgit v1.2.3