From 1dc748b3b202cadf9b799874d9af8d441ee556bc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 5 Apr 2019 14:51:50 +0200 Subject: dts: update to v5.1-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/net/btusb.txt | 3 + dts/Bindings/net/cpsw-phy-sel.txt | 2 +- dts/Bindings/net/dsa/dsa.txt | 5 + dts/Bindings/net/dsa/ksz.txt | 145 +++++++++++++++++---------- dts/Bindings/net/dsa/mt7530.txt | 6 +- dts/Bindings/net/fsl-enetc.txt | 69 +++++++++++++ dts/Bindings/net/macb.txt | 4 +- dts/Bindings/net/marvell-armada-370-neta.txt | 2 +- dts/Bindings/net/mdio-mux-multiplexer.txt | 82 +++++++++++++++ dts/Bindings/net/mediatek-bluetooth.txt | 64 ++++++++++++ dts/Bindings/net/nixge.txt | 72 +++++++++++-- dts/Bindings/net/qcom,ethqos.txt | 64 ++++++++++++ dts/Bindings/net/stm32-dwmac.txt | 9 +- dts/Bindings/net/wireless/mediatek,mt76.txt | 19 ++++ 14 files changed, 479 insertions(+), 67 deletions(-) create mode 100644 dts/Bindings/net/fsl-enetc.txt create mode 100644 dts/Bindings/net/mdio-mux-multiplexer.txt create mode 100644 dts/Bindings/net/qcom,ethqos.txt (limited to 'dts/Bindings/net') diff --git a/dts/Bindings/net/btusb.txt b/dts/Bindings/net/btusb.txt index 37d67926dd..b1ad6ee68e 100644 --- a/dts/Bindings/net/btusb.txt +++ b/dts/Bindings/net/btusb.txt @@ -9,6 +9,9 @@ Required properties: (more may be added later) are: "usb1286,204e" (Marvell 8997) + "usbcf3,e300" (Qualcomm QCA6174A) + "usb4ca,301a" (Qualcomm QCA6174A (Lite-On)) + Also, vendors that use btusb may have device additional properties, e.g: Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt diff --git a/dts/Bindings/net/cpsw-phy-sel.txt b/dts/Bindings/net/cpsw-phy-sel.txt index 764c0c79b4..5d76f991c0 100644 --- a/dts/Bindings/net/cpsw-phy-sel.txt +++ b/dts/Bindings/net/cpsw-phy-sel.txt @@ -1,4 +1,4 @@ -TI CPSW Phy mode Selection Device Tree Bindings +TI CPSW Phy mode Selection Device Tree Bindings (DEPRECATED) ----------------------------------------------- Required properties: diff --git a/dts/Bindings/net/dsa/dsa.txt b/dts/Bindings/net/dsa/dsa.txt index 35694c0c37..d66a5292b9 100644 --- a/dts/Bindings/net/dsa/dsa.txt +++ b/dts/Bindings/net/dsa/dsa.txt @@ -71,6 +71,10 @@ properties, described in binding documents: Documentation/devicetree/bindings/net/fixed-link.txt for details. +- local-mac-address : See + Documentation/devicetree/bindings/net/ethernet.txt + for details. + Example The following example shows three switches on three MDIO busses, @@ -97,6 +101,7 @@ linked into one DSA cluster. port@1 { reg = <1>; label = "lan1"; + local-mac-address = [00 00 00 00 00 00]; }; port@2 { diff --git a/dts/Bindings/net/dsa/ksz.txt b/dts/Bindings/net/dsa/ksz.txt index 0f407fb371..e7db7268fd 100644 --- a/dts/Bindings/net/dsa/ksz.txt +++ b/dts/Bindings/net/dsa/ksz.txt @@ -7,6 +7,11 @@ Required properties: of the following: - "microchip,ksz9477" - "microchip,ksz9897" + - "microchip,ksz9896" + - "microchip,ksz9567" + - "microchip,ksz8565" + - "microchip,ksz9893" + - "microchip,ksz9563" Optional properties: @@ -19,58 +24,96 @@ Examples: Ethernet switch connected via SPI to the host, CPU port wired to eth0: - eth0: ethernet@10001000 { - fixed-link { - speed = <1000>; - full-duplex; - }; - }; + eth0: ethernet@10001000 { + fixed-link { + speed = <1000>; + full-duplex; + }; + }; - spi1: spi@f8008000 { - pinctrl-0 = <&pinctrl_spi_ksz>; - cs-gpios = <&pioC 25 0>; - id = <1>; + spi1: spi@f8008000 { + pinctrl-0 = <&pinctrl_spi_ksz>; + cs-gpios = <&pioC 25 0>; + id = <1>; - ksz9477: ksz9477@0 { - compatible = "microchip,ksz9477"; - reg = <0>; + ksz9477: ksz9477@0 { + compatible = "microchip,ksz9477"; + reg = <0>; - spi-max-frequency = <44000000>; - spi-cpha; - spi-cpol; + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - label = "lan1"; - }; - port@1 { - reg = <1>; - label = "lan2"; - }; - port@2 { - reg = <2>; - label = "lan3"; - }; - port@3 { - reg = <3>; - label = "lan4"; - }; - port@4 { - reg = <4>; - label = "lan5"; - }; - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <ð0>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@4 { + reg = <4>; + label = "lan5"; + }; + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + ksz8565: ksz8565@0 { + compatible = "microchip,ksz8565"; + reg = <0>; + + spi-max-frequency = <44000000>; + spi-cpha; + spi-cpol; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan1"; + }; + port@1 { + reg = <1>; + label = "lan2"; + }; + port@2 { + reg = <2>; + label = "lan3"; + }; + port@3 { + reg = <3>; + label = "lan4"; + }; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <ð0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/net/dsa/mt7530.txt b/dts/Bindings/net/dsa/mt7530.txt index aa3527f71f..47aa205ee0 100644 --- a/dts/Bindings/net/dsa/mt7530.txt +++ b/dts/Bindings/net/dsa/mt7530.txt @@ -3,12 +3,16 @@ Mediatek MT7530 Ethernet switch Required properties: -- compatible: Must be compatible = "mediatek,mt7530"; +- compatible: may be compatible = "mediatek,mt7530" + or compatible = "mediatek,mt7621" - #address-cells: Must be 1. - #size-cells: Must be 0. - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part on multi-chip module belong to MT7623A has or the remotely standalone chip as the function MT7623N reference board provided for. + +If compatible mediatek,mt7530 is set then the following properties are required + - core-supply: Phandle to the regulator node necessary for the core power. - io-supply: Phandle to the regulator node necessary for the I/O power. See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt diff --git a/dts/Bindings/net/fsl-enetc.txt b/dts/Bindings/net/fsl-enetc.txt new file mode 100644 index 0000000000..c812e25ae9 --- /dev/null +++ b/dts/Bindings/net/fsl-enetc.txt @@ -0,0 +1,69 @@ +* ENETC ethernet device tree bindings + +Depending on board design and ENETC port type (internal or +external) there are two supported link modes specified by +below device tree bindings. + +Required properties: + +- reg : Specifies PCIe Device Number and Function + Number of the ENETC endpoint device, according + to parent node bindings. +- compatible : Should be "fsl,enetc". + +1) The ENETC external port is connected to a MDIO configurable phy: + +In this case, the ENETC node should include a "mdio" sub-node +that in turn should contain the "ethernet-phy" node describing the +external phy. Below properties are required, their bindings +already defined in ethernet.txt or phy.txt, under +Documentation/devicetree/bindings/net/*. + +Required: + +- phy-handle : Phandle to a PHY on the MDIO bus. + Defined in ethernet.txt. + +- phy-connection-type : Defined in ethernet.txt. + +- mdio : "mdio" node, defined in mdio.txt. + +- ethernet-phy : "ethernet-phy" node, defined in phy.txt. + +Example: + + ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; + }; + +2) The ENETC port is an internal port or has a fixed-link external +connection: + +In this case, the ENETC port node defines a fixed link connection, +as specified by "fixed-link.txt", under +Documentation/devicetree/bindings/net/*. + +Required: + +- fixed-link : "fixed-link" node, defined in "fixed-link.txt". + +Example: + ethernet@0,2 { + compatible = "fsl,enetc"; + reg = <0x000200 0 0 0 0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; diff --git a/dts/Bindings/net/macb.txt b/dts/Bindings/net/macb.txt index 3e17ac1d5d..174f292d8a 100644 --- a/dts/Bindings/net/macb.txt +++ b/dts/Bindings/net/macb.txt @@ -3,8 +3,8 @@ Required properties: - compatible: Should be "cdns,[-]{macb|gem}" Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP - available on sama5d3 SoCs. + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs. + Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC. Use "cdns,np4-macb" for NP4 SoC devices. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on diff --git a/dts/Bindings/net/marvell-armada-370-neta.txt b/dts/Bindings/net/marvell-armada-370-neta.txt index bedcfd5a52..691f886cfc 100644 --- a/dts/Bindings/net/marvell-armada-370-neta.txt +++ b/dts/Bindings/net/marvell-armada-370-neta.txt @@ -19,7 +19,7 @@ Optional properties: "marvell,armada-370-neta" and 9800B for others. - clock-names: List of names corresponding to clocks property; shall be "core" for core clock and "bus" for the optional bus clock. - +- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt Optional properties (valid only for Armada XP/38x): diff --git a/dts/Bindings/net/mdio-mux-multiplexer.txt b/dts/Bindings/net/mdio-mux-multiplexer.txt new file mode 100644 index 0000000000..534e38058f --- /dev/null +++ b/dts/Bindings/net/mdio-mux-multiplexer.txt @@ -0,0 +1,82 @@ +Properties for an MDIO bus multiplexer consumer device + +This is a special case of MDIO mux when MDIO mux is defined as a consumer +of a mux producer device. The mux producer can be of any type like mmio mux +producer, gpio mux producer or generic register based mux producer. + +Required properties in addition to the MDIO Bus multiplexer properties: + +- compatible : should be "mmio-mux-multiplexer" +- mux-controls : mux controller node to use for operating the mux +- mdio-parent-bus : phandle to the parent MDIO bus. + +each child node of mdio bus multiplexer consumer device represent a mdio +bus. + +for more information please refer +Documentation/devicetree/bindings/mux/mux-controller.txt +and Documentation/devicetree/bindings/net/mdio-mux.txt + +Example: +In below example the Mux producer and consumer are separate nodes. + +&i2c0 { + fpga@66 { // fpga connected to i2c + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { // Mux Producer + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */ + }; + }; +}; + +mdio-mux-1 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@8 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; + +mdio-mux-2 { // Mux consumer + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells = <1>; + #size-cells = <0>; + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + .. + .. +}; diff --git a/dts/Bindings/net/mediatek-bluetooth.txt b/dts/Bindings/net/mediatek-bluetooth.txt index 14ceb2a5b4..41a7dcc80f 100644 --- a/dts/Bindings/net/mediatek-bluetooth.txt +++ b/dts/Bindings/net/mediatek-bluetooth.txt @@ -33,3 +33,67 @@ Example: clock-names = "ref"; }; }; + +MediaTek UART based Bluetooth Devices +================================== + +This device is a serial attached device to UART device and thus it must be a +child node of the serial node with UART. + +Please refer to the following documents for generic properties: + + Documentation/devicetree/bindings/serial/slave-device.txt + +Required properties: + +- compatible: Must be + "mediatek,mt7663u-bluetooth": for MT7663U device + "mediatek,mt7668u-bluetooth": for MT7668U device +- vcc-supply: Main voltage regulator +- pinctrl-names: Should be "default", "runtime" +- pinctrl-0: Should contain UART RXD low when the device is powered up to + enter proper bootstrap mode. +- pinctrl-1: Should contain UART mode pin ctrl + +Optional properties: + +- reset-gpios: GPIO used to reset the device whose initial state keeps low, + if the GPIO is missing, then board-level design should be + guaranteed. +- current-speed: Current baud rate of the device whose defaults to 921600 + +Example: + + uart1_pins_boot: uart1-default { + pins-dat { + pinmux = ; + output-low; + }; + }; + + uart1_pins_runtime: uart1-runtime { + pins-dat { + pinmux = , + ; + }; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt7623-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = ; + clocks = <&pericfg CLK_PERI_UART1_SEL>, + <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; + + bluetooth { + compatible = "mediatek,mt7663u-bluetooth"; + vcc-supply = <®_5v>; + reset-gpios = <&pio 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "runtime"; + pinctrl-0 = <&uart1_pins_boot>; + pinctrl-1 = <&uart1_pins_runtime>; + current-speed = <921600>; + }; + }; diff --git a/dts/Bindings/net/nixge.txt b/dts/Bindings/net/nixge.txt index e55af7f088..85d7240a9b 100644 --- a/dts/Bindings/net/nixge.txt +++ b/dts/Bindings/net/nixge.txt @@ -1,16 +1,52 @@ * NI XGE Ethernet controller Required properties: -- compatible: Should be "ni,xge-enet-2.00" -- reg: Address and length of the register set for the device +- compatible: Should be "ni,xge-enet-3.00", but can be "ni,xge-enet-2.00" for + older device trees with DMA engines co-located in the address map, + with the one reg entry to describe the whole device. +- reg: Address and length of the register set for the device. It contains the + information of registers in the same order as described by reg-names. +- reg-names: Should contain the reg names + "dma": DMA engine control and status region + "ctrl": MDIO and PHY control and status region - interrupts: Should contain tx and rx interrupt - interrupt-names: Should be "rx" and "tx" - phy-mode: See ethernet.txt file in the same directory. -- phy-handle: See ethernet.txt file in the same directory. - nvmem-cells: Phandle of nvmem cell containing the MAC address - nvmem-cell-names: Should be "address" +Optional properties: +- mdio subnode to indicate presence of MDIO controller +- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. + Use instead of phy-handle. +- phy-handle: See ethernet.txt file in the same directory. + Examples (10G generic PHY): + nixge0: ethernet@40000000 { + compatible = "ni,xge-enet-3.00"; + reg = <0x40000000 0x4000 + 0x41002000 0x2000>; + reg-names = "dma", "ctrl"; + + nvmem-cells = <ð1_addr>; + nvmem-cell-names = "address"; + + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + interrupt-parent = <&intc>; + + phy-mode = "xgmii"; + phy-handle = <ðernet_phy1>; + + mdio { + ethernet_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + }; + +Examples (10G generic PHY, no MDIO): nixge0: ethernet@40000000 { compatible = "ni,xge-enet-2.00"; reg = <0x40000000 0x6000>; @@ -24,9 +60,33 @@ Examples (10G generic PHY): phy-mode = "xgmii"; phy-handle = <ðernet_phy1>; + }; + +Examples (1G generic fixed-link + MDIO): + nixge0: ethernet@40000000 { + compatible = "ni,xge-enet-2.00"; + reg = <0x40000000 0x6000>; - ethernet_phy1: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <4>; + nvmem-cells = <ð1_addr>; + nvmem-cell-names = "address"; + + interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx", "tx"; + interrupt-parent = <&intc>; + + phy-mode = "xgmii"; + + fixed-link { + speed = <1000>; + pause; + link-gpios = <&gpio0 63 GPIO_ACTIVE_HIGH>; + }; + + mdio { + ethernet_phy1: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; }; + }; diff --git a/dts/Bindings/net/qcom,ethqos.txt b/dts/Bindings/net/qcom,ethqos.txt new file mode 100644 index 0000000000..fcf5035810 --- /dev/null +++ b/dts/Bindings/net/qcom,ethqos.txt @@ -0,0 +1,64 @@ +Qualcomm Ethernet ETHQOS device + +This documents dwmmac based ethernet device which supports Gigabit +ethernet for version v2.3.0 onwards. + +This device has following properties: + +Required properties: + +- compatible: Should be qcom,qcs404-ethqos" + +- reg: Address and length of the register set for the device + +- reg-names: Should contain register names "stmmaceth", "rgmii" + +- clocks: Should contain phandle to clocks + +- clock-names: Should contain clock names "stmmaceth", "pclk", + "ptp_ref", "rgmii" + +- interrupts: Should contain phandle to interrupts + +- interrupt-names: Should contain interrupt names "macirq", "eth_lpi" + +Rest of the properties are defined in stmmac.txt file in same directory + + +Example: + +ethernet: ethernet@7a80000 { + compatible = "qcom,qcs404-ethqos"; + reg = <0x07a80000 0x10000>, + <0x07a96000 0x100>; + reg-names = "stmmaceth", "rgmii"; + clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii"; + clocks = <&gcc GCC_ETH_AXI_CLK>, + <&gcc GCC_ETH_SLAVE_AHB_CLK>, + <&gcc GCC_ETH_PTP_CLK>, + <&gcc GCC_ETH_RGMII_CLK>; + interrupts = , + ; + interrupt-names = "macirq", "eth_lpi"; + snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + + snps,txpbl = <8>; + snps,rxpbl = <2>; + snps,aal; + snps,tso; + + phy-handle = <&phy1>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + compatible = "snps,dwmac-mdio"; + phy1: phy@4 { + device_type = "ethernet-phy"; + reg = <0x4>; + }; + }; + +}; diff --git a/dts/Bindings/net/stm32-dwmac.txt b/dts/Bindings/net/stm32-dwmac.txt index 1341012722..a90eef11dc 100644 --- a/dts/Bindings/net/stm32-dwmac.txt +++ b/dts/Bindings/net/stm32-dwmac.txt @@ -14,8 +14,7 @@ Required properties: - clock-names: Should be "stmmaceth" for the host clock. Should be "mac-clk-tx" for the MAC TX clock. Should be "mac-clk-rx" for the MAC RX clock. - For MPU family need to add also "ethstp" for power mode clock and, - "syscfg-clk" for SYSCFG clock. + For MPU family need to add also "ethstp" for power mode clock - interrupt-names: Should contain a list of interrupt names corresponding to the interrupts in the interrupts property, if available. Should be "macirq" for the main MAC IRQ @@ -24,9 +23,9 @@ Required properties: encompases the glue register, and the offset of the control register. Optional properties: -- clock-names: For MPU family "mac-clk-ck" for PHY without quartz -- st,int-phyclk (boolean) : valid only where PHY do not have quartz and need to be clock - by RCC +- clock-names: For MPU family "eth-ck" for PHY without quartz +- st,eth-clk-sel (boolean) : set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. +- st,eth-ref-clk-sel (boolean) : set this property in RMII mode when you have PHY without crystal 50MHz and want to select RCC clock instead of ETH_REF_CLK. Example: diff --git a/dts/Bindings/net/wireless/mediatek,mt76.txt b/dts/Bindings/net/wireless/mediatek,mt76.txt index 0c17a0ec9b..7b9a776230 100644 --- a/dts/Bindings/net/wireless/mediatek,mt76.txt +++ b/dts/Bindings/net/wireless/mediatek,mt76.txt @@ -4,6 +4,13 @@ This node provides properties for configuring the MediaTek mt76xx wireless device. The node is expected to be specified as a child node of the PCI controller to which the wireless chip is connected. +Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC. +For SoC, use the compatible string "mediatek,mt7628-wmac" and the following +properties: + +- reg: Address and length of the register set for the device. +- interrupts: Main device interrupt + Optional properties: - mac-address: See ethernet.txt in the parent directory @@ -30,3 +37,15 @@ Optional nodes: }; }; }; + +MT7628 example: + +wmac: wmac@10300000 { + compatible = "mediatek,mt7628-wmac"; + reg = <0x10300000 0x100000>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + mediatek,mtd-eeprom = <&factory 0x0000>; +}; -- cgit v1.2.3