From 796af3473b8222bcd89aa63e9886c355a6baf95d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 5 Jun 2019 00:06:30 +0200 Subject: dts: update to v5.2-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/pinctrl/cirrus,lochnagar.txt | 141 ++++++++++++++++++++++++++++++ 1 file changed, 141 insertions(+) create mode 100644 dts/Bindings/pinctrl/cirrus,lochnagar.txt (limited to 'dts/Bindings/pinctrl/cirrus,lochnagar.txt') diff --git a/dts/Bindings/pinctrl/cirrus,lochnagar.txt b/dts/Bindings/pinctrl/cirrus,lochnagar.txt new file mode 100644 index 0000000000..a87447180e --- /dev/null +++ b/dts/Bindings/pinctrl/cirrus,lochnagar.txt @@ -0,0 +1,141 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the pinctrl portion +of the driver. + +Also see these documents for generic binding information: + [1] GPIO : ../gpio/gpio.txt + [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt + +And these for relevant defines: + [3] include/dt-bindings/pinctrl/lochnagar.h + +This binding must be part of the Lochnagar MFD binding: + [4] ../mfd/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar-pinctrl" + + - gpio-controller : Indicates this device is a GPIO controller. + - #gpio-cells : Must be 2. The first cell is the pin number, see + [3] for available pins and the second cell is used to specify + optional parameters, see [1]. + - gpio-ranges : Range of pins managed by the GPIO controller, see + [1]. Both the GPIO and Pinctrl base should be set to zero and the + count to the appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, + see [3]. + + - pinctrl-names : A pinctrl state named "default" must be defined. + - pinctrl-0 : A phandle to the default pinctrl state. + +Required sub-nodes: + +The pin configurations are defined as a child of the pinctrl states +node, see [2]. Each sub-node can have the following properties: + - groups : A list of groups to select (either this or "pins" must be + specified), available groups: + codec-aif1, codec-aif2, codec-aif3, dsp-aif1, dsp-aif2, psia1, + psia2, gf-aif1, gf-aif2, gf-aif3, gf-aif4, spdif-aif, usb-aif1, + usb-aif2, adat-aif, soundcard-aif + - pins : A list of pin names to select (either this or "groups" must + be specified), available pins: + fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5, + fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4, + codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1, + dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2, + gf-gpio3, gf-gpio7, codec-aif1-bclk, codec-aif1-rxdat, + codec-aif1-lrclk, codec-aif1-txdat, codec-aif2-bclk, + codec-aif2-rxdat, codec-aif2-lrclk, codec-aif2-txdat, + codec-aif3-bclk, codec-aif3-rxdat, codec-aif3-lrclk, + codec-aif3-txdat, dsp-aif1-bclk, dsp-aif1-rxdat, dsp-aif1-lrclk, + dsp-aif1-txdat, dsp-aif2-bclk, dsp-aif2-rxdat, + dsp-aif2-lrclk, dsp-aif2-txdat, psia1-bclk, psia1-rxdat, + psia1-lrclk, psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk, + psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, gf-aif3-lrclk, + gf-aif3-txdat, gf-aif4-bclk, gf-aif4-rxdat, gf-aif4-lrclk, + gf-aif4-txdat, gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk, + gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, gf-aif2-lrclk, + gf-aif2-txdat, dsp-uart1-rx, dsp-uart1-tx, dsp-uart2-rx, + dsp-uart2-tx, gf-uart2-rx, gf-uart2-tx, usb-uart-rx, + codec-pdmclk1, codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, + codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, + codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, + dsp-dmicclk1, dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl, + i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, dsp-standby, + codec-mclk1, codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk, + gf-gpio1, gf-gpio5, dsp-gpio20, led1, led2 + - function : The mux function to select, available functions: + aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5, + fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4, + codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1, + dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2, + gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, dsp-gpio20, codec-clkout, + dsp-clkout, pmic-32k, spdif-clkout, clk-12m288, clk-11m2986, + clk-24m576, clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1, + gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, codec-mclk2, + dsp-clkin, psia1-mclk, psia2-mclk, spdif-mclk, codec-irq, + codec-reset, dsp-reset, dsp-irq, dsp-standby, codec-pdmclk1, + codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, codec-dmicclk1, + codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, codec-dmicclk3, + codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1, + dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx, + dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, gf-uart2-rx, + gf-uart2-tx, usb-uart-rx, usb-uart-tx, i2c2-scl, i2c2-sda, + i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, spdif-aif, psia1, + psia1-bclk, psia1-lrclk, psia1-rxdat, psia1-txdat, psia2, + psia2-bclk, psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1, + codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat, + codec-aif1-txdat, codec-aif2, codec-aif2-bclk, codec-aif2-lrclk, + codec-aif2-rxdat, codec-aif2-txdat, codec-aif3, codec-aif3-bclk, + codec-aif3-lrclk, codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1, + dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, dsp-aif1-txdat, + dsp-aif2, dsp-aif2-bclk, dsp-aif2-lrclk, dsp-aif2-rxdat, + dsp-aif2-txdat, gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, + gf-aif3-rxdat, gf-aif3-txdat, gf-aif4, gf-aif4-bclk, + gf-aif4-lrclk, gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, + gf-aif1-bclk, gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, + gf-aif2, gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat, + gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, soundcard-aif, + + - output-enable : Specifies that an AIF group will be used as a master + interface (either this or input-enable is required if a group is + being muxed to an AIF) + - input-enable : Specifies that an AIF group will be used as a slave + interface (either this or output-enable is required if a group is + being muxed to an AIF) + +Example: + +lochnagar-pinctrl { + compatible = "cirrus,lochnagar-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>; + + pinctrl-names = "default"; + pinctrl-0 = <&pin-settings>; + + pin-settings: pin-settings { + ap-aif { + input-enable; + groups = "gf-aif1"; + function = "codec-aif3"; + }; + codec-aif { + output-enable; + groups = "codec-aif3"; + function = "gf-aif1"; + }; + }; +}; -- cgit v1.2.3