From 35f607bc7da71b302fd6bf3d6d48d7ea66df1195 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Sep 2018 08:26:30 +0200 Subject: dts: update to v4.19-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/power/reset/qcom,pon.txt | 45 +++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 dts/Bindings/power/reset/qcom,pon.txt (limited to 'dts/Bindings/power/reset/qcom,pon.txt') diff --git a/dts/Bindings/power/reset/qcom,pon.txt b/dts/Bindings/power/reset/qcom,pon.txt new file mode 100644 index 0000000000..651491bb63 --- /dev/null +++ b/dts/Bindings/power/reset/qcom,pon.txt @@ -0,0 +1,45 @@ +Qualcomm PON Device + +The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey +and resin along with the Android reboot-mode. + +This DT node has pwrkey and resin as sub nodes. + +Required Properties: +-compatible: "qcom,pm8916-pon" +-reg: Specifies the physical address of the pon register + +Optional subnode: +-pwrkey: Specifies the subnode pwrkey and should follow the + qcom,pm8941-pwrkey.txt description. +-resin: Specifies the subnode resin and should follow the + qcom,pm8xxx-pwrkey.txt description. + +The rest of the properties should follow the generic reboot-mode description +found in reboot-mode.txt + +Example: + + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + }; -- cgit v1.2.3