From 35f607bc7da71b302fd6bf3d6d48d7ea66df1195 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Sep 2018 08:26:30 +0200 Subject: dts: update to v4.19-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/power/supply/maxim,ds2760.txt | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 dts/Bindings/power/supply/maxim,ds2760.txt (limited to 'dts/Bindings/power/supply/maxim,ds2760.txt') diff --git a/dts/Bindings/power/supply/maxim,ds2760.txt b/dts/Bindings/power/supply/maxim,ds2760.txt new file mode 100644 index 0000000000..55967a0bee --- /dev/null +++ b/dts/Bindings/power/supply/maxim,ds2760.txt @@ -0,0 +1,26 @@ +Devicetree bindings for Maxim DS2760 +==================================== + +The ds2760 is a w1 slave device and must hence have its sub-node in DT +under a w1 bus master node. + +The device exposes a power supply, so the details described in +Documentation/devicetree/bindings/power/supply/power_supply.txt apply. + +Required properties: +- compatible: must be "maxim,ds2760" + +Optional properties: +- power-supplies: Refers to one or more power supplies connected to + this battery. +- maxim,pmod-enabled: This boolean property enables the DS2760 to enter + sleep mode when the DQ line goes low for greater + than 2 seconds and leave sleep Mode when the DQ + line goes high. +- maxim,cache-time-ms: Time im milliseconds to cache the data for. When + this time expires, the values are read again from + the hardware. Defaults to 1000. +- rated-capacity-microamp-hours: + The rated capacity of the battery, in mAh. + If not specified, the value stored in the + non-volatile chip memory is used. -- cgit v1.2.3