From 35f607bc7da71b302fd6bf3d6d48d7ea66df1195 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 11 Sep 2018 08:26:30 +0200 Subject: dts: update to v4.19-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt | 21 ++++++++ dts/Bindings/reset/qcom,aoss-reset.txt | 52 ++++++++++++++++++++ dts/Bindings/reset/uniphier-reset.txt | 56 ++++++++++++++++++++++ 3 files changed, 129 insertions(+) create mode 100644 dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt create mode 100644 dts/Bindings/reset/qcom,aoss-reset.txt (limited to 'dts/Bindings/reset') diff --git a/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt b/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt new file mode 100644 index 0000000000..26e542eb96 --- /dev/null +++ b/dts/Bindings/reset/amlogic,meson-axg-audio-arb.txt @@ -0,0 +1,21 @@ +* Amlogic audio memory arbiter controller + +The Amlogic Audio ARB is a simple device which enables or +disables the access of Audio FIFOs to DDR on AXG based SoC. + +Required properties: +- compatible: 'amlogic,meson-axg-audio-arb' +- reg: physical base address of the controller and length of memory + mapped region. +- clocks: phandle to the fifo peripheral clock provided by the audio + clock controller. +- #reset-cells: must be 1. + +Example on the A113 SoC: + +arb: reset-controller@280 { + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; +}; diff --git a/dts/Bindings/reset/qcom,aoss-reset.txt b/dts/Bindings/reset/qcom,aoss-reset.txt new file mode 100644 index 0000000000..510c748656 --- /dev/null +++ b/dts/Bindings/reset/qcom,aoss-reset.txt @@ -0,0 +1,52 @@ +Qualcomm AOSS Reset Controller +====================================== + +This binding describes a reset-controller found on AOSS-CC (always on subsystem) +for Qualcomm SDM845 SoCs. + +Required properties: +- compatible: + Usage: required + Value type: + Definition: must be: + "qcom,sdm845-aoss-cc" + +- reg: + Usage: required + Value type: + Definition: must specify the base address and size of the register + space. + +- #reset-cells: + Usage: required + Value type: + Definition: must be 1; cell entry represents the reset index. + +Example: + +aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sdm845-aoss-cc"; + reg = <0xc2a0000 0x31000>; + #reset-cells = <1>; +}; + +Specifying reset lines connected to IP modules +============================================== + +Device nodes that need access to reset lines should +specify them as a reset phandle in their corresponding node as +specified in reset.txt. + +For list of all valid reset indicies see + + +Example: + +modem-pil@4080000 { + ... + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>; + reset-names = "mss_restart"; + + ... +}; diff --git a/dts/Bindings/reset/uniphier-reset.txt b/dts/Bindings/reset/uniphier-reset.txt index 93efed6299..101743dda2 100644 --- a/dts/Bindings/reset/uniphier-reset.txt +++ b/dts/Bindings/reset/uniphier-reset.txt @@ -118,3 +118,59 @@ Example: other nodes ... }; + + +USB3 core reset +--------------- + +USB3 core reset belongs to USB3 glue layer. Before using the core reset, +it is necessary to control the clocks and resets to enable this layer. +These clocks and resets should be described in each property. + +Required properties: +- compatible: Should be + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC +- #reset-cells: Should be 1. +- reg: Specifies offset and length of the register set for the device. +- clocks: A list of phandles to the clock gate for USB3 glue layer. + According to the clock-names, appropriate clocks are required. +- clock-names: Should contain + "gio", "link" - for Pro4 SoC + "link" - for others +- resets: A list of phandles to the reset control for USB3 glue layer. + According to the reset-names, appropriate resets are required. +- reset-names: Should contain + "gio", "link" - for Pro4 SoC + "link" - for others + +Example: + + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_rst: reset@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + regulator { + ... + }; + + phy { + ... + }; + ... + }; -- cgit v1.2.3