From cd728905be82ab66456212a9fcc311c553e39422 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 16 Nov 2023 08:18:48 +0100 Subject: dts: update to v6.7-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/serial/maxim,max310x.txt | 48 ----------------------------------- 1 file changed, 48 deletions(-) delete mode 100644 dts/Bindings/serial/maxim,max310x.txt (limited to 'dts/Bindings/serial/maxim,max310x.txt') diff --git a/dts/Bindings/serial/maxim,max310x.txt b/dts/Bindings/serial/maxim,max310x.txt deleted file mode 100644 index 79e10a05a9..0000000000 --- a/dts/Bindings/serial/maxim,max310x.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART) - -Required properties: -- compatible: Should be one of the following: - - "maxim,max3107" for Maxim MAX3107, - - "maxim,max3108" for Maxim MAX3108, - - "maxim,max3109" for Maxim MAX3109, - - "maxim,max14830" for Maxim MAX14830. -- reg: SPI chip select number. -- interrupts: Specifies the interrupt source of the parent interrupt - controller. The format of the interrupt specifier depends on the - parent interrupt controller. -- clocks: phandle to the IC source clock. -- clock-names: Should be "xtal" if clock is an external crystal or - "osc" if an external clock source is used. - -Optional properties: -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells: Should be two. The first cell is the GPIO number and - the second cell is used to specify the GPIO polarity: - 0 = active high, - 1 = active low. - -Example: - -/ { - clocks { - spi_uart_clk: osc_max14830 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <3686400>; - }; - - }; -}; - -&spi0 { - max14830: max14830@0 { - compatible = "maxim,max14830"; - reg = <0>; - clocks = <&spi_uart_clk>; - clock-names = "osc"; - interrupt-parent = <&gpio3>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - gpio-controller; - #gpio-cells = <2>; - }; -}; -- cgit v1.2.3