From 86186c232241b607f84cc266a6cda49160f44948 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 13 Jun 2016 07:31:46 +0200 Subject: dts: update to v4.7-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/serial/microchip,pic32-uart.txt | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 dts/Bindings/serial/microchip,pic32-uart.txt (limited to 'dts/Bindings/serial/microchip,pic32-uart.txt') diff --git a/dts/Bindings/serial/microchip,pic32-uart.txt b/dts/Bindings/serial/microchip,pic32-uart.txt new file mode 100644 index 0000000000..7a34345d0c --- /dev/null +++ b/dts/Bindings/serial/microchip,pic32-uart.txt @@ -0,0 +1,29 @@ +* Microchip Universal Asynchronous Receiver Transmitter (UART) + +Required properties: +- compatible: Should be "microchip,pic32mzda-uart" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt +- clocks: Phandle to the clock. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- pinctrl-names: A pinctrl state names "default" must be defined. +- pinctrl-0: Phandle referencing pin configuration of the UART peripheral. + See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + +Optional properties: +- cts-gpios: CTS pin for UART + +Example: + uart1: serial@1f822000 { + compatible = "microchip,pic32mzda-uart"; + reg = <0x1f822000 0x50>; + interrupts = <112 IRQ_TYPE_LEVEL_HIGH>, + <113 IRQ_TYPE_LEVEL_HIGH>, + <114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rootclk PB2CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 + &pinctrl_uart1_cts + &pinctrl_uart1_rts>; + cts-gpios = <&gpio1 15 0>; + }; -- cgit v1.2.3