From 38504401dae231611f489b10734d9e9ab34082d5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 13 Apr 2015 10:37:32 +0200 Subject: dts: update to v4.0-rc3 Signed-off-by: Sascha Hauer --- dts/Bindings/serial/snps-dw-apb-uart.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'dts/Bindings/serial') diff --git a/dts/Bindings/serial/snps-dw-apb-uart.txt b/dts/Bindings/serial/snps-dw-apb-uart.txt index 7f76214f72..289c40ed74 100644 --- a/dts/Bindings/serial/snps-dw-apb-uart.txt +++ b/dts/Bindings/serial/snps-dw-apb-uart.txt @@ -21,6 +21,18 @@ Optional properties: - reg-io-width : the size (in bytes) of the IO accesses that should be performed on the device. If this property is not present then single byte accesses are used. +- dcd-override : Override the DCD modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- dsr-override : Override the DTS modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- cts-override : Override the CTS modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- ri-override : Override the RI modem status signal. This signal will always be + reported as inactive instead of being obtained from the modem status register. + Define this if your serial port does not use this pin. Example: @@ -31,6 +43,10 @@ Example: interrupts = <10>; reg-shift = <2>; reg-io-width = <4>; + dcd-override; + dsr-override; + cts-override; + ri-override; }; Example with one clock: -- cgit v1.2.3