From bb2de9a333d17bb1b048ad208002501226b83f03 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 6 Jun 2017 08:07:28 +0200 Subject: dts: update to v4.12-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/soc/fsl/cpm_qe/gpio.txt | 21 ++++++++++++- dts/Bindings/soc/rockchip/grf.txt | 5 +++ dts/Bindings/soc/ti/sci-pm-domain.txt | 57 +++++++++++++++++++++++++++++++++++ 3 files changed, 82 insertions(+), 1 deletion(-) create mode 100644 dts/Bindings/soc/ti/sci-pm-domain.txt (limited to 'dts/Bindings/soc') diff --git a/dts/Bindings/soc/fsl/cpm_qe/gpio.txt b/dts/Bindings/soc/fsl/cpm_qe/gpio.txt index 349f79fd70..626e1afa64 100644 --- a/dts/Bindings/soc/fsl/cpm_qe/gpio.txt +++ b/dts/Bindings/soc/fsl/cpm_qe/gpio.txt @@ -13,8 +13,17 @@ Required properties: - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - gpio-controller : Marks the port as GPIO controller. +Optional properties: +- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C + on CPM1), this item tells which ports have an associated interrupt (ports are + listed in the same order as in PCINT register) +- interrupts : This property provides the list of interrupt for each GPIO having + one as described by the fsl,cpm1-gpio-irq-mask property. There should be as + many interrupts as number of ones in the mask property. The first interrupt in + the list corresponds to the most significant bit of the mask. +- interrupt-parent : Parent for the above interrupt property. -Example of three SOC GPIO banks defined as gpio-controller nodes: +Example of four SOC GPIO banks defined as gpio-controller nodes: CPM1_PIO_A: gpio-controller@950 { #gpio-cells = <2>; @@ -30,6 +39,16 @@ Example of three SOC GPIO banks defined as gpio-controller nodes: gpio-controller; }; + CPM1_PIO_C: gpio-controller@960 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-c"; + reg = <0x960 0x10>; + fsl,cpm1-gpio-irq-mask = <0x0fff>; + interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>; + interrupt-parent = <&CPM_PIC>; + gpio-controller; + }; + CPM1_PIO_E: gpio-controller@ac8 { #gpio-cells = <2>; compatible = "fsl,cpm1-pario-bank-e"; diff --git a/dts/Bindings/soc/rockchip/grf.txt b/dts/Bindings/soc/rockchip/grf.txt index a0685c2092..cc9f05d3cb 100644 --- a/dts/Bindings/soc/rockchip/grf.txt +++ b/dts/Bindings/soc/rockchip/grf.txt @@ -8,6 +8,8 @@ From RK3368 SoCs, the GRF is divided into two sections, - SGRF, used for general secure system, - PMUGRF, used for always on system +On RK3328 SoCs, the GRF adds a section for USB2PHYGRF, + Required Properties: - compatible: GRF should be one of the following: @@ -16,6 +18,7 @@ Required Properties: - "rockchip,rk3188-grf", "syscon": for rk3188 - "rockchip,rk3228-grf", "syscon": for rk3228 - "rockchip,rk3288-grf", "syscon": for rk3288 + - "rockchip,rk3328-grf", "syscon": for rk3328 - "rockchip,rk3368-grf", "syscon": for rk3368 - "rockchip,rk3399-grf", "syscon": for rk3399 - compatible: PMUGRF should be one of the following: @@ -23,6 +26,8 @@ Required Properties: - "rockchip,rk3399-pmugrf", "syscon": for rk3399 - compatible: SGRF should be one of the following - "rockchip,rk3288-sgrf", "syscon": for rk3288 +- compatible: USB2PHYGRF should be one of the followings + - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328 - reg: physical base address of the controller and length of memory mapped region. diff --git a/dts/Bindings/soc/ti/sci-pm-domain.txt b/dts/Bindings/soc/ti/sci-pm-domain.txt new file mode 100644 index 0000000000..c705db07d8 --- /dev/null +++ b/dts/Bindings/soc/ti/sci-pm-domain.txt @@ -0,0 +1,57 @@ +Texas Instruments TI-SCI Generic Power Domain +--------------------------------------------- + +Some TI SoCs contain a system controller (like the PMMC, etc...) that is +responsible for controlling the state of the IPs that are present. +Communication between the host processor running an OS and the system +controller happens through a protocol known as TI-SCI [1]. + +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt + +PM Domain Node +============== +The PM domain node represents the global PM domain managed by the PMMC, which +in this case is the implementation as documented by the generic PM domain +bindings in Documentation/devicetree/bindings/power/power_domain.txt. Because +this relies on the TI SCI protocol to communicate with the PMMC it must be a +child of the pmmc node. + +Required Properties: +-------------------- +- compatible: should be "ti,sci-pm-domain" +- #power-domain-cells: Must be 1 so that an id can be provided in each + device node. + +Example (K2G): +------------- + pmmc: pmmc { + compatible = "ti,k2g-sci"; + ... + + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + }; + +PM Domain Consumers +=================== +Hardware blocks belonging to a PM domain should contain a "power-domains" +property that is a phandle pointing to the corresponding PM domain node +along with an index representing the device id to be passed to the PMMC +for device control. + +Required Properties: +-------------------- +- power-domains: phandle pointing to the corresponding PM domain node + and an ID representing the device. + +See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g. + +Example (K2G): +-------------------- + uart0: serial@02530c00 { + compatible = "ns16550a"; + ... + power-domains = <&k2g_pds K2G_DEV_UART0>; + }; -- cgit v1.2.3