From ab001302c8e1718110bb8839c270d2caa817b214 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 9 Feb 2015 08:45:25 +0100 Subject: dts: update to v3.19-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/sound/imx-audio-spdif.txt | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'dts/Bindings/sound/imx-audio-spdif.txt') diff --git a/dts/Bindings/sound/imx-audio-spdif.txt b/dts/Bindings/sound/imx-audio-spdif.txt index 7d13479f9c..da84a442cc 100644 --- a/dts/Bindings/sound/imx-audio-spdif.txt +++ b/dts/Bindings/sound/imx-audio-spdif.txt @@ -2,23 +2,25 @@ Freescale i.MX audio complex with S/PDIF transceiver Required properties: - - compatible : "fsl,imx-audio-spdif" + - compatible : "fsl,imx-audio-spdif" - - model : The user-visible name of this sound complex + - model : The user-visible name of this sound complex - - spdif-controller : The phandle of the i.MX S/PDIF controller + - spdif-controller : The phandle of the i.MX S/PDIF controller Optional properties: - - spdif-out : This is a boolean property. If present, the transmitting - function of S/PDIF will be enabled, indicating there's a physical - S/PDIF out connector/jack on the board or it's connecting to some - other IP block, such as an HDMI encoder/display-controller. + - spdif-out : This is a boolean property. If present, the + transmitting function of S/PDIF will be enabled, + indicating there's a physical S/PDIF out connector + or jack on the board or it's connecting to some + other IP block, such as an HDMI encoder or + display-controller. - - spdif-in : This is a boolean property. If present, the receiving - function of S/PDIF will be enabled, indicating there's a physical - S/PDIF in connector/jack on the board. + - spdif-in : This is a boolean property. If present, the receiving + function of S/PDIF will be enabled, indicating there + is a physical S/PDIF in connector/jack on the board. * Note: At least one of these two properties should be set in the DT binding. -- cgit v1.2.3