From 1dc748b3b202cadf9b799874d9af8d441ee556bc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 5 Apr 2019 14:51:50 +0200 Subject: dts: update to v5.1-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/sound/adi,adau1977.txt | 13 +- dts/Bindings/sound/ak4458.txt | 2 +- dts/Bindings/sound/audio-graph-scu-card.txt | 123 ------------------ dts/Bindings/sound/cs35l36.txt | 168 +++++++++++++++++++++++++ dts/Bindings/sound/cs4341.txt | 22 ++++ dts/Bindings/sound/davinci-mcasp-audio.txt | 17 +++ dts/Bindings/sound/fsl,micfil.txt | 32 +++++ dts/Bindings/sound/google,cros-ec-codec.txt | 26 ++++ dts/Bindings/sound/ingenic,jz4725b-codec.txt | 20 +++ dts/Bindings/sound/ingenic,jz4740-codec.txt | 20 +++ dts/Bindings/sound/mt6358.txt | 18 +++ dts/Bindings/sound/mt8183-afe-pcm.txt | 36 ++++++ dts/Bindings/sound/mtk-btcvsd-snd.txt | 24 ++++ dts/Bindings/sound/nvidia,tegra30-hda.txt | 5 + dts/Bindings/sound/qcom,msm8916-wcd-analog.txt | 7 +- dts/Bindings/sound/qcom,wcd9335.txt | 10 +- dts/Bindings/sound/rockchip,rk3328-codec.txt | 23 ++++ dts/Bindings/sound/sgtl5000.txt | 9 ++ dts/Bindings/sound/simple-scu-card.txt | 94 -------------- dts/Bindings/sound/sprd-pcm.txt | 23 ++++ dts/Bindings/sound/xlnx,audio-formatter.txt | 29 +++++ dts/Bindings/sound/xlnx,spdif.txt | 28 +++++ 22 files changed, 520 insertions(+), 229 deletions(-) delete mode 100644 dts/Bindings/sound/audio-graph-scu-card.txt create mode 100644 dts/Bindings/sound/cs35l36.txt create mode 100644 dts/Bindings/sound/cs4341.txt create mode 100644 dts/Bindings/sound/fsl,micfil.txt create mode 100644 dts/Bindings/sound/google,cros-ec-codec.txt create mode 100644 dts/Bindings/sound/ingenic,jz4725b-codec.txt create mode 100644 dts/Bindings/sound/ingenic,jz4740-codec.txt create mode 100644 dts/Bindings/sound/mt6358.txt create mode 100644 dts/Bindings/sound/mt8183-afe-pcm.txt create mode 100644 dts/Bindings/sound/mtk-btcvsd-snd.txt create mode 100644 dts/Bindings/sound/rockchip,rk3328-codec.txt delete mode 100644 dts/Bindings/sound/simple-scu-card.txt create mode 100644 dts/Bindings/sound/sprd-pcm.txt create mode 100644 dts/Bindings/sound/xlnx,audio-formatter.txt create mode 100644 dts/Bindings/sound/xlnx,spdif.txt (limited to 'dts/Bindings/sound') diff --git a/dts/Bindings/sound/adi,adau1977.txt b/dts/Bindings/sound/adi,adau1977.txt index e79aeef73f..9225472c80 100644 --- a/dts/Bindings/sound/adi,adau1977.txt +++ b/dts/Bindings/sound/adi,adau1977.txt @@ -17,12 +17,18 @@ Required properties: Documentation/devicetree/bindings/regulator/regulator.txt Optional properties: - - reset-gpio: the reset pin for the chip, for more details consult + - reset-gpios: the reset pin for the chip, for more details consult Documentation/devicetree/bindings/gpio/gpio.txt - DVDD-supply: supply voltage for the digital core, please consult Documentation/devicetree/bindings/regulator/regulator.txt +- adi,micbias: configures the voltage setting for the MICBIAS pin. + Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage + 5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V + If not specified the default value will be "7" meaning 8.5 Volts. + This property is only valid for the ADAU1977 + For required properties on SPI, please consult Documentation/devicetree/bindings/spi/spi-bus.txt @@ -40,7 +46,8 @@ Examples: AVDD-supply = <®ulator>; DVDD-supply = <®ulator_digital>; - reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + adi,micbias = <3>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; adau1977_i2c: adau1977@11 { @@ -50,5 +57,5 @@ Examples: AVDD-supply = <®ulator>; DVDD-supply = <®ulator_digital>; - reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; diff --git a/dts/Bindings/sound/ak4458.txt b/dts/Bindings/sound/ak4458.txt index 7839be7844..e5820235e0 100644 --- a/dts/Bindings/sound/ak4458.txt +++ b/dts/Bindings/sound/ak4458.txt @@ -4,7 +4,7 @@ This device supports I2C mode. Required properties: -- compatible : "asahi-kasei,ak4458" +- compatible : "asahi-kasei,ak4458" or "asahi-kasei,ak4497" - reg : The I2C address of the device for I2C Optional properties: diff --git a/dts/Bindings/sound/audio-graph-scu-card.txt b/dts/Bindings/sound/audio-graph-scu-card.txt deleted file mode 100644 index 62d42768a0..0000000000 --- a/dts/Bindings/sound/audio-graph-scu-card.txt +++ /dev/null @@ -1,123 +0,0 @@ -Audio-Graph-SCU-Card: - -Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM". - -It is based on common bindings for device graphs. -see ${LINUX}/Documentation/devicetree/bindings/graph.txt - -Basically, Audio-Graph-SCU-Card property is same as -Simple-Card / Simple-SCU-Card / Audio-Graph-Card. -see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt - ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt - ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt - -Below are same as Simple-Card / Audio-Graph-Card. - -- label -- dai-format -- frame-master -- bitclock-master -- bitclock-inversion -- frame-inversion -- dai-tdm-slot-num -- dai-tdm-slot-width -- clocks / system-clock-frequency - -Below are same as Simple-SCU-Card. - -- convert-rate -- convert-channels -- prefix -- routing - -Required properties: - -- compatible : "audio-graph-scu-card"; -- dais : list of CPU DAI port{s} - -Example 1. Sampling Rate Conversion - - sound_card { - compatible = "audio-graph-scu-card"; - - label = "sound-card"; - prefix = "codec"; - routing = "codec Playback", "DAI0 Playback", - "DAI0 Capture", "codec Capture"; - convert-rate = <48000>; - - dais = <&cpu_port>; - }; - - audio-codec { - ... - - port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; - }; - - dai-controller { - ... - cpu_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - - dai-format = "left_j"; - ... - }; - }; - }; - -Example 2. 2 CPU 1 Codec (Mixing) - - sound_card { - compatible = "audio-graph-scu-card"; - - label = "sound-card"; - routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback", - "DAI0 Capture", "codec Capture"; - - dais = <&cpu_port0 - &cpu_port1>; - }; - - audio-codec { - ... - - audio-graph-card,prefix = "codec"; - audio-graph-card,convert-rate = <48000>; - port { - codec_endpoint0: endpoint { - remote-endpoint = <&cpu_endpoint0>; - }; - codec_endpoint1: endpoint { - remote-endpoint = <&cpu_endpoint1>; - }; - }; - }; - - dai-controller { - ... - ports { - cpu_port0: port { - cpu_endpoint0: endpoint { - remote-endpoint = <&codec_endpoint0>; - - dai-format = "left_j"; - ... - }; - }; - cpu_port1: port { - cpu_endpoint1: endpoint { - remote-endpoint = <&codec_endpoint1>; - - dai-format = "left_j"; - ... - }; - }; - }; - }; diff --git a/dts/Bindings/sound/cs35l36.txt b/dts/Bindings/sound/cs35l36.txt new file mode 100644 index 0000000000..912bd162b4 --- /dev/null +++ b/dts/Bindings/sound/cs35l36.txt @@ -0,0 +1,168 @@ +CS35L36 Speaker Amplifier + +Required properties: + + - compatible : "cirrus,cs35l36" + + - reg : the I2C address of the device for I2C + + - VA-supply, VP-supply : power supplies for the device, + as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + - cirrus,boost-ctl-millivolt : Boost Voltage Value. Configures the boost + converter's output voltage in mV. The range is from 2550mV to 12000mV with + increments of 50mV. + (Default) VP + + - cirrus,boost-peak-milliamp : Boost-converter peak current limit in mA. + Configures the peak current by monitoring the current through the boost FET. + Range starts at 1600mA and goes to a maximum of 4500mA with increments of + 50mA. + (Default) 4.50 Amps + + - cirrus,boost-ind-nanohenry : Inductor estimation LBST reference value. + Seeds the digital boost converter's inductor estimation block with the initial + inductance value to reference. + + 1000 = 1uH (Default) + 1200 = 1.2uH + +Optional properties: + - cirrus,multi-amp-mode : Boolean to determine if there are more than + one amplifier in the system. If more than one it is best to Hi-Z the ASP + port to prevent bus contention on the output signal + + - cirrus,boost-ctl-select : Boost conerter control source selection. + Selects the source of the BST_CTL target VBST voltage for the boost + converter to generate. + 0x00 - Control Port Value + 0x01 - Class H Tracking (Default) + 0x10 - MultiDevice Sync Value + + - cirrus,amp-pcm-inv : Boolean to determine Amplifier will invert incoming + PCM data + + - cirrus,imon-pol-inv : Boolean to determine Amplifier will invert the + polarity of outbound IMON feedback data + + - cirrus,vmon-pol-inv : Boolean to determine Amplifier will invert the + polarity of outbound VMON feedback data + + - cirrus,dcm-mode-enable : Boost converter automatic DCM Mode enable. + This enables the digital boost converter to operate in a low power + (Discontinuous Conduction) mode during low loading conditions. + + - cirrus,weak-fet-disable : Boolean : The strength of the output drivers is + reduced when operating in a Weak-FET Drive Mode and must not be used to drive + a large load. + + - cirrus,classh-wk-fet-delay : Weak-FET entry delay. Controls the delay + (in ms) before the Class H algorithm switches to the weak-FET voltage + (after the audio falls and remains below the value specified in WKFET_AMP_THLD). + + 0 = 0ms + 1 = 5ms + 2 = 10ms + 3 = 50ms + 4 = 100ms (Default) + 5 = 200ms + 6 = 500ms + 7 = 1000ms + + - cirrus,classh-weak-fet-thld-millivolt : Weak-FET amplifier drive threshold. + Configures the signal threshold at which the PWM output stage enters + weak-FET operation. The range is 50mV to 700mV in 50mV increments. + + - cirrus,temp-warn-threshold : Amplifier overtemperature warning threshold. + Configures the threshold at which the overtemperature warning condition occurs. + When the threshold is met, the overtemperature warning attenuation is applied + and the TEMP_WARN_EINT interrupt status bit is set. + If TEMP_WARN_MASK = 0, INTb is asserted. + + 0 = 105C + 1 = 115C + 2 = 125C (Default) + 3 = 135C + + - cirrus,irq-drive-select : Selects the driver type of the selected interrupt + output. + + 0 = Open-drain + 1 = Push-pull (Default) + + - cirrus,irq-gpio-select : Selects the pin to serve as the programmable + interrupt output. + + 0 = PDM_DATA / SWIRE_SD / INT (Default) + 1 = GPIO + +Optional properties for the "cirrus,vpbr-config" Sub-node + + - cirrus,vpbr-en : VBST brownout prevention enable. Configures whether the + VBST brownout prevention algorithm is enabled or disabled. + + 0 = VBST brownout prevention disabled (default) + 1 = VBST brownout prevention enabled + + See Section 7.31.1 VPBR Config for configuration options & further details + + - cirrus,vpbr-thld : Initial VPBR threshold. Configures the VP brownout + threshold voltage + + - cirrus,cirrus,vpbr-atk-rate : Attenuation attack step rate. Configures the + amount delay between consecutive volume attenuation steps when a brownout + condition is present and the VP brownout condition is in an attacking state. + + - cirrus,vpbr-atk-vol : VP brownout prevention step size. Configures the VP + brownout prevention attacking attenuation step size when operating in either + digital volume or analog gain modes. + + - cirrus,vpbr-max-attn : Maximum attenuation that the VP brownout prevention + can apply to the audio signal. + + - cirrus,vpbr-wait : Configures the delay time between a brownout condition + no longer being present and the VP brownout prevention entering an attenuation + release state. + + - cirrus,vpbr-rel-rate : Attenuation release step rate. Configures the delay + between consecutive volume attenuation release steps when a brownout condition + is not longer present and the VP brownout is in an attenuation release state. + + - cirrus,vpbr-mute-en : During the attack state, if the vpbr-max-attn value + is reached, the error condition still remains, and this bit is set, the audio + is muted. + +Example: + +cs35l36: cs35l36@40 { + compatible = "cirrus,cs35l36"; + reg = <0x40>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + reset-gpios = <&gpio0 54 0>; + interrupt-parent = <&gpio8>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + cirrus,boost-ind-nanohenry = <1000>; + cirrus,boost-ctl-millivolt = <10000>; + cirrus,boost-peak-milliamp = <4500>; + cirrus,boost-ctl-select = <0x00>; + cirrus,weak-fet-delay = <0x04>; + cirrus,weak-fet-thld = <0x01>; + cirrus,temp-warn-threshold = <0x01>; + cirrus,multi-amp-mode; + cirrus,irq-drive-select = <0x01>; + cirrus,irq-gpio-select = <0x01>; + + cirrus,vpbr-config { + cirrus,vpbr-en = <0x00>; + cirrus,vpbr-thld = <0x05>; + cirrus,vpbr-atk-rate = <0x02>; + cirrus,vpbr-atk-vol = <0x01>; + cirrus,vpbr-max-attn = <0x09>; + cirrus,vpbr-wait = <0x01>; + cirrus,vpbr-rel-rate = <0x05>; + cirrus,vpbr-mute-en = <0x00>; + }; +}; diff --git a/dts/Bindings/sound/cs4341.txt b/dts/Bindings/sound/cs4341.txt new file mode 100644 index 0000000000..12b4aa8ef0 --- /dev/null +++ b/dts/Bindings/sound/cs4341.txt @@ -0,0 +1,22 @@ +Cirrus Logic CS4341 audio DAC + +This device supports both I2C and SPI (configured with pin strapping +on the board). + +Required properties: + - compatible: "cirrus,cs4341a" + - reg : the I2C address of the device for I2C, the chip select + number for SPI. + +For required properties on I2C-bus, please consult +Documentation/devicetree/bindings/i2c/i2c.txt +For required properties on SPI-bus, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + codec: cs4341@0 { + #sound-dai-cells = <0>; + compatible = "cirrus,cs4341a"; + reg = <0>; + spi-max-frequency = <6000000>; + }; diff --git a/dts/Bindings/sound/davinci-mcasp-audio.txt b/dts/Bindings/sound/davinci-mcasp-audio.txt index b279b6072b..a58f79f534 100644 --- a/dts/Bindings/sound/davinci-mcasp-audio.txt +++ b/dts/Bindings/sound/davinci-mcasp-audio.txt @@ -45,6 +45,23 @@ Optional properties: - fck_parent : Should contain a valid clock name which will be used as parent for the McASP fck +Optional GPIO support: +If any McASP pin need to be used as GPIO then the McASP node must have: +... + gpio-controller + #gpio-cells = <2>; +... + +When requesting a GPIO, the first parameter is the PIN index in McASP_P* +registers. +For example to request the AXR2 pin of mcasp8: +function-gpios = <&mcasp8 2 0>; + +Or to request the ACLKR pin of mcasp8: +function-gpios = <&mcasp8 29 0>; + +For generic gpio information, please refer to bindings/gpio/gpio.txt + Example: mcasp0: mcasp0@1d00000 { diff --git a/dts/Bindings/sound/fsl,micfil.txt b/dts/Bindings/sound/fsl,micfil.txt new file mode 100644 index 0000000000..53e227b152 --- /dev/null +++ b/dts/Bindings/sound/fsl,micfil.txt @@ -0,0 +1,32 @@ +NXP MICFIL Digital Audio Interface (MICFIL). + +The MICFIL digital interface provides a 16-bit audio signal from a PDM +microphone bitstream in a configurable output sampling rate. + +Required properties: + + - compatible : Compatible list, contains "fsl,imx8mm-micfil" + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the micfil interrupts. + + - clocks : Must contain an entry for each entry in clock-names. + + - clock-names : Must include the "ipg_clk" for register access and + "ipg_clk_app" for internal micfil clock. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + +Example: +micfil: micfil@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x0 0x30080000 0x0 0x10000>; + interrupts = , + ; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>; + clock-names = "ipg_clk", "ipg_clk_app"; + dmas = <&sdma2 24 26 0x80000000>; +}; diff --git a/dts/Bindings/sound/google,cros-ec-codec.txt b/dts/Bindings/sound/google,cros-ec-codec.txt new file mode 100644 index 0000000000..1084f7f22e --- /dev/null +++ b/dts/Bindings/sound/google,cros-ec-codec.txt @@ -0,0 +1,26 @@ +* Audio codec controlled by ChromeOS EC + +Google's ChromeOS EC codec is a digital mic codec provided by the +Embedded Controller (EC) and is controlled via a host-command interface. + +An EC codec node should only be found as a sub-node of the EC node (see +Documentation/devicetree/bindings/mfd/cros-ec.txt). + +Required properties: +- compatible: Must contain "google,cros-ec-codec" +- #sound-dai-cells: Should be 1. The cell specifies number of DAIs. +- max-dmic-gain: A number for maximum gain in dB on digital microphone. + +Example: + +cros-ec@0 { + compatible = "google,cros-ec-spi"; + + ... + + cros_ec_codec: ec-codec { + compatible = "google,cros-ec-codec"; + #sound-dai-cells = <1>; + max-dmic-gain = <43>; + }; +}; diff --git a/dts/Bindings/sound/ingenic,jz4725b-codec.txt b/dts/Bindings/sound/ingenic,jz4725b-codec.txt new file mode 100644 index 0000000000..05adc0d47b --- /dev/null +++ b/dts/Bindings/sound/ingenic,jz4725b-codec.txt @@ -0,0 +1,20 @@ +Ingenic JZ4725B codec controller + +Required properties: +- compatible : "ingenic,jz4725b-codec" +- reg : codec registers location and length +- clocks : phandle to the AIC clock. +- clock-names: must be set to "aic". +- #sound-dai-cells: Must be set to 0. + +Example: + +codec: audio-codec@100200a4 { + compatible = "ingenic,jz4725b-codec"; + reg = <0x100200a4 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4725B_CLK_AIC>; + clock-names = "aic"; +}; diff --git a/dts/Bindings/sound/ingenic,jz4740-codec.txt b/dts/Bindings/sound/ingenic,jz4740-codec.txt new file mode 100644 index 0000000000..1ffcade87e --- /dev/null +++ b/dts/Bindings/sound/ingenic,jz4740-codec.txt @@ -0,0 +1,20 @@ +Ingenic JZ4740 codec controller + +Required properties: +- compatible : "ingenic,jz4740-codec" +- reg : codec registers location and length +- clocks : phandle to the AIC clock. +- clock-names: must be set to "aic". +- #sound-dai-cells: Must be set to 0. + +Example: + +codec: audio-codec@10020080 { + compatible = "ingenic,jz4740-codec"; + reg = <0x10020080 0x8>; + + #sound-dai-cells = <0>; + + clocks = <&cgu JZ4740_CLK_AIC>; + clock-names = "aic"; +}; diff --git a/dts/Bindings/sound/mt6358.txt b/dts/Bindings/sound/mt6358.txt new file mode 100644 index 0000000000..5465730013 --- /dev/null +++ b/dts/Bindings/sound/mt6358.txt @@ -0,0 +1,18 @@ +Mediatek MT6358 Audio Codec + +The communication between MT6358 and SoC is through Mediatek PMIC wrapper. +For more detail, please visit Mediatek PMIC wrapper documentation. + +Must be a child node of PMIC wrapper. + +Required properties: + +- compatible : "mediatek,mt6358-sound". +- Avdd-supply : power source of AVDD + +Example: + +mt6358_snd { + compatible = "mediatek,mt6358-sound"; + Avdd-supply = <&mt6358_vaud28_reg>; +}; diff --git a/dts/Bindings/sound/mt8183-afe-pcm.txt b/dts/Bindings/sound/mt8183-afe-pcm.txt new file mode 100644 index 0000000000..396ba38619 --- /dev/null +++ b/dts/Bindings/sound/mt8183-afe-pcm.txt @@ -0,0 +1,36 @@ +Mediatek AFE PCM controller for mt8183 + +Required properties: +- compatible = "mediatek,mt68183-audio"; +- reg: register location and size +- interrupts: should contain AFE interrupt +- power-domains: should define the power domain +- clocks: Must contain an entry for each entry in clock-names +- clock-names: should have these clock names: + "infra_sys_audio_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_sys_pll3_d4", + "top_clk26m_clk"; + +Example: + + afe: mt8183-afe-pcm@11220000 { + compatible = "mediatek,mt8183-audio"; + reg = <0 0x11220000 0 0x1000>; + interrupts = ; + power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>; + clocks = <&infrasys CLK_INFRA_AUDIO>, + <&infrasys CLK_INFRA_AUDIO_26M_BCLK>, + <&topckgen CLK_TOP_MUX_AUDIO>, + <&topckgen CLK_TOP_MUX_AUD_INTBUS>, + <&topckgen CLK_TOP_SYSPLL_D2_D4>, + <&clk26m>; + clock-names = "infra_sys_audio_clk", + "mtkaif_26m_clk", + "top_mux_audio", + "top_mux_aud_intbus", + "top_sys_pll_d2_d4", + "top_clk26m_clk"; + }; diff --git a/dts/Bindings/sound/mtk-btcvsd-snd.txt b/dts/Bindings/sound/mtk-btcvsd-snd.txt new file mode 100644 index 0000000000..679e44839b --- /dev/null +++ b/dts/Bindings/sound/mtk-btcvsd-snd.txt @@ -0,0 +1,24 @@ +Mediatek ALSA BT SCO CVSD/MSBC Driver + +Required properties: +- compatible = "mediatek,mtk-btcvsd-snd"; +- reg: register location and size of PKV and SRAM_BANK2 +- interrupts: should contain BTSCO interrupt +- mediatek,infracfg: the phandles of INFRASYS +- mediatek,offset: Array contains of register offset and mask + infra_misc_offset, + infra_conn_bt_cvsd_mask, + cvsd_mcu_read_offset, + cvsd_mcu_write_offset, + cvsd_packet_indicator_offset + +Example: + + mtk-btcvsd-snd@18000000 { + compatible = "mediatek,mtk-btcvsd-snd"; + reg=<0 0x18000000 0 0x1000>, + <0 0x18080000 0 0x8000>; + interrupts = ; + mediatek,infracfg = <&infrasys>; + mediatek,offset = <0xf00 0x800 0xfd0 0xfd4 0xfd8>; + }; diff --git a/dts/Bindings/sound/nvidia,tegra30-hda.txt b/dts/Bindings/sound/nvidia,tegra30-hda.txt index 44d27456e8..21cd310963 100644 --- a/dts/Bindings/sound/nvidia,tegra30-hda.txt +++ b/dts/Bindings/sound/nvidia,tegra30-hda.txt @@ -13,6 +13,10 @@ Required properties: See ../reset/reset.txt for details. - reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x +Optional properties: +- nvidia,model : The user-visible name of this sound complex. Since the property + is optional, legacy boards can use default name provided in hda driver. + Example: hda@70030000 { @@ -27,4 +31,5 @@ hda@70030000 { <&tegra_car 128>, /* hda2hdmi */ <&tegra_car 111>; /* hda2codec_2x */ reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + nvidia,model = "jetson-tk1-hda"; }; diff --git a/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt index fdcea3d12e..e7d17dda55 100644 --- a/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt +++ b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt @@ -30,6 +30,7 @@ Required properties - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. + Optional Properties: - qcom,mbhc-vthreshold-low: Array of 5 threshold voltages in mV for 5 buttons detection on headset when the mbhc is powered up @@ -92,9 +93,9 @@ spmi_bus { "cdc_ear_cnp_int", "cdc_hphr_cnp_int", "cdc_hphl_cnp_int"; - VDD-CDC-IO-supply = <&pm8916_l5>; - VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>; - VDD-MICBIAS-supply = <&pm8916_l13>; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; #sound-dai-cells = <1>; }; }; diff --git a/dts/Bindings/sound/qcom,wcd9335.txt b/dts/Bindings/sound/qcom,wcd9335.txt index 1d8d49e30a..5d6ea66a86 100644 --- a/dts/Bindings/sound/qcom,wcd9335.txt +++ b/dts/Bindings/sound/qcom,wcd9335.txt @@ -34,12 +34,12 @@ Required properties with SLIMbus Interface: Definition: Interrupt names of WCD INTR1 and INTR2 Should be: "intr1", "intr2" -- reset-gpio: +- reset-gpios: Usage: required Value type: Definition: Reset gpio line -- qcom,ifd: +- slim-ifc-dev: Usage: required Value type: Definition: SLIM interface device @@ -104,13 +104,13 @@ Required properties with SLIMbus Interface: Value type: Definition: Must be 1 -codec@1{ +audio-codec@1{ compatible = "slim217,1a0"; reg = <1 0>; interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "intr2" - reset-gpio = <&msmgpio 64 0>; - qcom,ifd = <&wc9335_ifd>; + reset-gpios = <&msmgpio 64 0>; + slim-ifc-dev = <&wc9335_ifd>; clock-names = "mclk", "native"; clocks = <&rpmcc RPM_SMD_DIV_CLK1>, <&rpmcc RPM_SMD_BB_CLK1>; diff --git a/dts/Bindings/sound/rockchip,rk3328-codec.txt b/dts/Bindings/sound/rockchip,rk3328-codec.txt new file mode 100644 index 0000000000..2469588c7c --- /dev/null +++ b/dts/Bindings/sound/rockchip,rk3328-codec.txt @@ -0,0 +1,23 @@ +* Rockchip Rk3328 internal codec + +Required properties: + +- compatible: "rockchip,rk3328-codec" +- reg: physical base address of the controller and length of memory mapped + region. +- rockchip,grf: the phandle of the syscon node for GRF register. +- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. +- clock-names: should be "pclk". +- spk-depop-time-ms: speak depop time msec. + +Example for rk3328 internal codec: + +codec: codec@ff410000 { + compatible = "rockchip,rk3328-codec"; + reg = <0x0 0xff410000 0x0 0x1000>; + rockchip,grf = <&grf>; + clocks = <&cru PCLK_ACODEC>; + clock-names = "pclk"; + spk-depop-time-ms = 100; + status = "disabled"; +}; diff --git a/dts/Bindings/sound/sgtl5000.txt b/dts/Bindings/sound/sgtl5000.txt index 9c58f72439..9d9ff51849 100644 --- a/dts/Bindings/sound/sgtl5000.txt +++ b/dts/Bindings/sound/sgtl5000.txt @@ -37,6 +37,15 @@ VDDIO 1.8V 2.5V 3.3V 2 = 3.33 mA 5.74 mA 8.03 mA 3 = 4.99 mA 8.61 mA 12.05 mA +- sclk-strength: the SCLK pad strength. Possible values are: +0, 1, 2 and 3 as per the table below: + +VDDIO 1.8V 2.5V 3.3V +0 = Disable +1 = 1.66 mA 2.87 mA 4.02 mA +2 = 3.33 mA 5.74 mA 8.03 mA +3 = 4.99 mA 8.61 mA 12.05 mA + Example: sgtl5000: codec@a { diff --git a/dts/Bindings/sound/simple-scu-card.txt b/dts/Bindings/sound/simple-scu-card.txt deleted file mode 100644 index 3a2f71616c..0000000000 --- a/dts/Bindings/sound/simple-scu-card.txt +++ /dev/null @@ -1,94 +0,0 @@ -ASoC Simple SCU Sound Card - -Simple SCU Sound Card is "Simple Sound Card" + "ALSA DPCM". -For example, you can use this driver if you want to exchange sampling rate convert, -Mixing, etc... - -Required properties: - -- compatible : "simple-scu-audio-card" - "renesas,rsrc-card" -Optional properties: - -- simple-audio-card,name : see simple-audio-card.txt -- simple-audio-card,cpu : see simple-audio-card.txt -- simple-audio-card,codec : see simple-audio-card.txt - -Optional subnode properties: - -- simple-audio-card,format : see simple-audio-card.txt -- simple-audio-card,frame-master : see simple-audio-card.txt -- simple-audio-card,bitclock-master : see simple-audio-card.txt -- simple-audio-card,bitclock-inversion : see simple-audio-card.txt -- simple-audio-card,frame-inversion : see simple-audio-card.txt -- simple-audio-card,convert-rate : platform specified sampling rate convert -- simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch) -- simple-audio-card,prefix : see routing -- simple-audio-card,widgets : Please refer to widgets.txt. -- simple-audio-card,routing : A list of the connections between audio components. - Each entry is a pair of strings, the first being the connection's sink, - the second being the connection's source. Valid names for sources. - use audio-prefix if some components is using same sink/sources naming. - it can be used if compatible was "renesas,rsrc-card"; - -Required CPU/CODEC subnodes properties: - -- sound-dai : see simple-audio-card.txt - -Optional CPU/CODEC subnodes properties: - -- clocks / system-clock-frequency : see simple-audio-card.txt - -Example 1. Sampling Rate Conversion - -sound { - compatible = "simple-scu-audio-card"; - - simple-audio-card,name = "rsnd-ak4643"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - simple-audio-card,convert-rate = <48000>; - - simple-audio-card,prefix = "ak4642"; - simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", - "DAI0 Capture", "ak4642 Capture"; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; - }; -}; - -Example 2. 2 CPU 1 Codec (Mixing) - -sound { - compatible = "simple-scu-audio-card"; - - simple-audio-card,name = "rsnd-ak4643"; - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&dpcmcpu>; - simple-audio-card,frame-master = <&dpcmcpu>; - - simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", - "ak4642 Playback", "DAI1 Playback"; - - dpcmcpu: cpu@0 { - sound-dai = <&rcar_sound 0>; - }; - - cpu@1 { - sound-dai = <&rcar_sound 1>; - }; - - codec { - prefix = "ak4642"; - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; -}; diff --git a/dts/Bindings/sound/sprd-pcm.txt b/dts/Bindings/sound/sprd-pcm.txt new file mode 100644 index 0000000000..4b23e84b2e --- /dev/null +++ b/dts/Bindings/sound/sprd-pcm.txt @@ -0,0 +1,23 @@ +* Spreadtrum DMA platfrom bindings + +Required properties: +- compatible: Should be "sprd,pcm-platform". +- dmas: Specify the list of DMA controller phandle and DMA request line ordered pairs. +- dma-names: Identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. + +Example: + + audio_platform:platform@0 { + compatible = "sprd,pcm-platform"; + dmas = <&agcp_dma 1 1>, <&agcp_dma 2 2>, + <&agcp_dma 3 3>, <&agcp_dma 4 4>, + <&agcp_dma 5 5>, <&agcp_dma 6 6>, + <&agcp_dma 7 7>, <&agcp_dma 8 8>, + <&agcp_dma 9 9>, <&agcp_dma 10 10>; + dma-names = "normal_p_l", "normal_p_r", + "normal_c_l", "normal_c_r", + "voice_c", "fast_p", + "loop_c", "loop_p", + "voip_c", "voip_p"; + }; diff --git a/dts/Bindings/sound/xlnx,audio-formatter.txt b/dts/Bindings/sound/xlnx,audio-formatter.txt new file mode 100644 index 0000000000..cbc93c8f49 --- /dev/null +++ b/dts/Bindings/sound/xlnx,audio-formatter.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for Xilinx PL audio formatter + +The IP core supports DMA, data formatting(AES<->PCM conversion) +of audio samples. + +Required properties: + - compatible: "xlnx,audio-formatter-1.0" + - interrupt-names: Names specified to list of interrupts in same + order mentioned under "interrupts". + List of supported interrupt names are: + "irq_mm2s" : interrupt from MM2S block + "irq_s2mm" : interrupt from S2MM block + - interrupts-parent: Phandle for interrupt controller. + - interrupts: List of Interrupt numbers. + - reg: Base address and size of the IP core instance. + - clock-names: List of input clocks. + Required elements: "s_axi_lite_aclk", "aud_mclk" + - clocks: Input clock specifier. Refer to common clock bindings. + +Example: + audio_ss_0_audio_formatter_0: audio_formatter@80010000 { + compatible = "xlnx,audio-formatter-1.0"; + interrupt-names = "irq_mm2s", "irq_s2mm"; + interrupt-parent = <&gic>; + interrupts = <0 104 4>, <0 105 4>; + reg = <0x0 0x80010000 0x0 0x1000>; + clock-names = "s_axi_lite_aclk", "aud_mclk"; + clocks = <&clk 71>, <&clk_wiz_1 0>; + }; diff --git a/dts/Bindings/sound/xlnx,spdif.txt b/dts/Bindings/sound/xlnx,spdif.txt new file mode 100644 index 0000000000..15c2d64d24 --- /dev/null +++ b/dts/Bindings/sound/xlnx,spdif.txt @@ -0,0 +1,28 @@ +Device-Tree bindings for Xilinx SPDIF IP + +The IP supports playback and capture of SPDIF audio + +Required properties: + - compatible: "xlnx,spdif-2.0" + - clock-names: List of input clocks. + Required elements: "s_axi_aclk", "aud_clk_i" + - clocks: Input clock specifier. Refer to common clock bindings. + - reg: Base address and address length of the IP core instance. + - interrupts-parent: Phandle for interrupt controller. + - interrupts: List of Interrupt numbers. + - xlnx,spdif-mode: 0 :- receiver mode + 1 :- transmitter mode + - xlnx,aud_clk_i: input audio clock value. + +Example: + spdif_0: spdif@80010000 { + clock-names = "aud_clk_i", "s_axi_aclk"; + clocks = <&misc_clk_0>, <&clk 71>; + compatible = "xlnx,spdif-2.0"; + interrupt-names = "spdif_interrupt"; + interrupt-parent = <&gic>; + interrupts = <0 91 4>; + reg = <0x0 0x80010000 0x0 0x10000>; + xlnx,spdif-mode = <1>; + xlnx,aud_clk_i = <49152913>; + }; -- cgit v1.2.3