From 574eed3f6fcf056aa4c9e46c4b5224e3f7844d8d Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 19 Dec 2019 05:46:54 +0100 Subject: dts: update to v5.5-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/sound/adi,adau7118.yaml | 85 +++++++ dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml | 267 +++++++++++++++++++++ .../sound/allwinner,sun8i-a23-codec-analog.yaml | 38 +++ dts/Bindings/sound/arndale.txt | 5 +- dts/Bindings/sound/fsl,mqs.txt | 36 +++ dts/Bindings/sound/google,cros-ec-codec.txt | 24 +- dts/Bindings/sound/mt8183-afe-pcm.txt | 6 + .../sound/mt8183-mt6358-ts3a227-max98357.txt | 7 +- dts/Bindings/sound/renesas,fsi.txt | 31 --- dts/Bindings/sound/renesas,fsi.yaml | 76 ++++++ dts/Bindings/sound/renesas,rsnd.txt | 1 + dts/Bindings/sound/rockchip-max98090.txt | 27 ++- dts/Bindings/sound/rt1011.txt | 10 + dts/Bindings/sound/rt5682.txt | 6 + dts/Bindings/sound/samsung,odroid.txt | 54 ----- dts/Bindings/sound/samsung,odroid.yaml | 91 +++++++ dts/Bindings/sound/samsung-i2s.txt | 84 ------- dts/Bindings/sound/samsung-i2s.yaml | 138 +++++++++++ dts/Bindings/sound/sun4i-codec.txt | 94 -------- dts/Bindings/sound/sun8i-codec-analog.txt | 17 -- dts/Bindings/sound/tas2562.txt | 34 +++ dts/Bindings/sound/tas2770.txt | 37 +++ dts/Bindings/sound/ti,pcm3168a.txt | 8 + dts/Bindings/sound/tlv320aic31xx.txt | 5 + 24 files changed, 893 insertions(+), 288 deletions(-) create mode 100644 dts/Bindings/sound/adi,adau7118.yaml create mode 100644 dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml create mode 100644 dts/Bindings/sound/allwinner,sun8i-a23-codec-analog.yaml create mode 100644 dts/Bindings/sound/fsl,mqs.txt delete mode 100644 dts/Bindings/sound/renesas,fsi.txt create mode 100644 dts/Bindings/sound/renesas,fsi.yaml delete mode 100644 dts/Bindings/sound/samsung,odroid.txt create mode 100644 dts/Bindings/sound/samsung,odroid.yaml delete mode 100644 dts/Bindings/sound/samsung-i2s.txt create mode 100644 dts/Bindings/sound/samsung-i2s.yaml delete mode 100644 dts/Bindings/sound/sun4i-codec.txt delete mode 100644 dts/Bindings/sound/sun8i-codec-analog.txt create mode 100644 dts/Bindings/sound/tas2562.txt create mode 100644 dts/Bindings/sound/tas2770.txt (limited to 'dts/Bindings/sound') diff --git a/dts/Bindings/sound/adi,adau7118.yaml b/dts/Bindings/sound/adi,adau7118.yaml new file mode 100644 index 0000000000..75e0cbe6be --- /dev/null +++ b/dts/Bindings/sound/adi,adau7118.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau7118.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + + +title: Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter + +maintainers: + - Nuno Sá + +description: | + Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter over I2C or HW + standalone mode. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7118.pdf + +properties: + compatible: + enum: + - adi,adau7118 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + iovdd-supply: + description: Digital Input/Output Power Supply. + + dvdd-supply: + description: Internal Core Digital Power Supply. + + adi,decimation-ratio: + description: | + This property set's the decimation ratio of PDM to PCM audio data. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [64, 32, 16] + default: 64 + + adi,pdm-clk-map: + description: | + The ADAU7118 has two PDM clocks for the four Inputs. Each input must be + assigned to one of these two clocks. This property set's the mapping + between the clocks and the inputs. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 4 + maxItems: 4 + items: + maximum: 1 + default: [0, 0, 1, 1] + +required: + - "#sound-dai-cells" + - compatible + - iovdd-supply + - dvdd-supply + +examples: + - | + i2c { + /* example with i2c support */ + #address-cells = <1>; + #size-cells = <0>; + adau7118_codec: audio-codec@14 { + compatible = "adi,adau7118"; + reg = <0x14>; + #sound-dai-cells = <0>; + iovdd-supply = <&supply>; + dvdd-supply = <&supply>; + adi,pdm-clk-map = <1 1 0 0>; + adi,decimation-ratio = <16>; + }; + }; + + /* example with hw standalone mode */ + adau7118_codec_hw: adau7118-codec-hw { + compatible = "adi,adau7118"; + #sound-dai-cells = <0>; + iovdd-supply = <&supply>; + dvdd-supply = <&supply>; + }; diff --git a/dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml b/dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml new file mode 100644 index 0000000000..b8f89c7258 --- /dev/null +++ b/dts/Bindings/sound/allwinner,sun4i-a10-codec.yaml @@ -0,0 +1,267 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun4i-a10-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 Codec Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + enum: + - allwinner,sun4i-a10-codec + - allwinner,sun6i-a31-codec + - allwinner,sun7i-a20-codec + - allwinner,sun8i-a23-codec + - allwinner,sun8i-h3-codec + - allwinner,sun8i-v3s-codec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: codec + + dmas: + items: + - description: RX DMA Channel + - description: TX DMA Channel + + dma-names: + items: + - const: rx + - const: tx + + resets: + maxItems: 1 + + allwinner,audio-routing: + description: |- + A list of the connections between audio components. Each entry + is a pair of strings, the first being the connection's sink, the + second being the connection's source. + allOf: + - $ref: /schemas/types.yaml#definitions/non-unique-string-array + - minItems: 2 + maxItems: 18 + items: + enum: + # Audio Pins on the SoC + - HP + - HPCOM + - LINEIN + - LINEOUT + - MIC1 + - MIC2 + - MIC3 + + # Microphone Biases from the SoC + - HBIAS + - MBIAS + + # Board Connectors + - Headphone + - Headset Mic + - Line In + - Line Out + - Mic + - Speaker + + allwinner,codec-analog-controls: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the codec analog controls in the PRCM + + allwinner,pa-gpios: + description: GPIO to enable the external amplifier + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +allOf: + - if: + properties: + compatible: + enum: + - allwinner,sun6i-a31-codec + - allwinner,sun8i-a23-codec + - allwinner,sun8i-h3-codec + - allwinner,sun8i-v3s-codec + + then: + if: + properties: + compatible: + const: allwinner,sun6i-a31-codec + + then: + required: + - resets + - allwinner,audio-routing + + else: + required: + - resets + - allwinner,audio-routing + - allwinner,codec-analog-controls + + - if: + properties: + compatible: + enum: + - allwinner,sun6i-a31-codec + + then: + properties: + allwinner,audio-routing: + items: + enum: + - HP + - HPCOM + - LINEIN + - LINEOUT + - MIC1 + - MIC2 + - MIC3 + - HBIAS + - MBIAS + - Headphone + - Headset Mic + - Line In + - Line Out + - Mic + - Speaker + + - if: + properties: + compatible: + enum: + - allwinner,sun8i-a23-codec + + then: + properties: + allwinner,audio-routing: + items: + enum: + - HP + - HPCOM + - LINEIN + - MIC1 + - MIC2 + - HBIAS + - MBIAS + - Headphone + - Headset Mic + - Line In + - Line Out + - Mic + - Speaker + + - if: + properties: + compatible: + enum: + - allwinner,sun8i-h3-codec + + then: + properties: + allwinner,audio-routing: + items: + enum: + - HP + - HPCOM + - LINEIN + - LINEOUT + - MIC1 + - MIC2 + - HBIAS + - MBIAS + - Headphone + - Headset Mic + - Line In + - Line Out + - Mic + - Speaker + + - if: + properties: + compatible: + enum: + - allwinner,sun8i-v3s-codec + + then: + properties: + allwinner,audio-routing: + items: + enum: + - HP + - HPCOM + - MIC1 + - HBIAS + - Headphone + - Headset Mic + - Line In + - Line Out + - Mic + - Speaker + +additionalProperties: false + +examples: + - | + codec@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun7i-a20-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <0 30 4>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma 0 19>, <&dma 0 19>; + dma-names = "rx", "tx"; + }; + + - | + codec@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-codec"; + reg = <0x01c22c00 0x98>; + interrupts = <0 29 4>; + clocks = <&ccu 61>, <&ccu 135>; + clock-names = "apb", "codec"; + resets = <&ccu 42>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,audio-routing = + "Headphone", "HP", + "Speaker", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "MBIAS", + "MIC1", "Mic", + "MIC2", "HBIAS", + "MIC2", "Headset Mic"; + }; + +... diff --git a/dts/Bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/dts/Bindings/sound/allwinner,sun8i-a23-codec-analog.yaml new file mode 100644 index 0000000000..85305b4c27 --- /dev/null +++ b/dts/Bindings/sound/allwinner,sun8i-a23-codec-analog.yaml @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/allwinner,sun8i-a23-codec-analog.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A23 Analog Codec Device Tree Bindings + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + compatible: + enum: + # FIXME: This is documented in the PRCM binding, but needs to be + # migrated here at some point + # - allwinner,sun8i-a23-codec-analog + - allwinner,sun8i-h3-codec-analog + - allwinner,sun8i-v3s-codec-analog + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + codec_analog: codec-analog@1f015c0 { + compatible = "allwinner,sun8i-h3-codec-analog"; + reg = <0x01f015c0 0x4>; + }; + +... diff --git a/dts/Bindings/sound/arndale.txt b/dts/Bindings/sound/arndale.txt index 0e76946385..17530120cc 100644 --- a/dts/Bindings/sound/arndale.txt +++ b/dts/Bindings/sound/arndale.txt @@ -1,8 +1,9 @@ Audio Binding for Arndale boards Required properties: -- compatible : Can be the following, - "samsung,arndale-rt5631" +- compatible : Can be one of the following: + "samsung,arndale-rt5631", + "samsung,arndale-wm1811" - samsung,audio-cpu: The phandle of the Samsung I2S controller - samsung,audio-codec: The phandle of the audio codec diff --git a/dts/Bindings/sound/fsl,mqs.txt b/dts/Bindings/sound/fsl,mqs.txt new file mode 100644 index 0000000000..40353fc302 --- /dev/null +++ b/dts/Bindings/sound/fsl,mqs.txt @@ -0,0 +1,36 @@ +fsl,mqs audio CODEC + +Required properties: + - compatible : Must contain one of "fsl,imx6sx-mqs", "fsl,codec-mqs" + "fsl,imx8qm-mqs", "fsl,imx8qxp-mqs". + - clocks : A list of phandles + clock-specifiers, one for each entry in + clock-names + - clock-names : "mclk" - must required. + "core" - required if compatible is "fsl,imx8qm-mqs", it + is for register access. + - gpr : A phandle of General Purpose Registers in IOMUX Controller. + Required if compatible is "fsl,imx6sx-mqs". + +Required if compatible is "fsl,imx8qm-mqs": + - power-domains: A phandle of PM domain provider node. + - reg: Offset and length of the register set for the device. + +Example: + +mqs: mqs { + compatible = "fsl,imx6sx-mqs"; + gpr = <&gpr>; + clocks = <&clks IMX6SX_CLK_SAI1>; + clock-names = "mclk"; + status = "disabled"; +}; + +mqs: mqs@59850000 { + compatible = "fsl,imx8qm-mqs"; + reg = <0x59850000 0x10000>; + clocks = <&clk IMX8QM_AUD_MQS_IPG>, + <&clk IMX8QM_AUD_MQS_HMCLK>; + clock-names = "core", "mclk"; + power-domains = <&pd_mqs0>; + status = "disabled"; +}; diff --git a/dts/Bindings/sound/google,cros-ec-codec.txt b/dts/Bindings/sound/google,cros-ec-codec.txt index 1084f7f22e..8ca52dcc55 100644 --- a/dts/Bindings/sound/google,cros-ec-codec.txt +++ b/dts/Bindings/sound/google,cros-ec-codec.txt @@ -1,4 +1,4 @@ -* Audio codec controlled by ChromeOS EC +Audio codec controlled by ChromeOS EC Google's ChromeOS EC codec is a digital mic codec provided by the Embedded Controller (EC) and is controlled via a host-command interface. @@ -9,10 +9,27 @@ Documentation/devicetree/bindings/mfd/cros-ec.txt). Required properties: - compatible: Must contain "google,cros-ec-codec" - #sound-dai-cells: Should be 1. The cell specifies number of DAIs. -- max-dmic-gain: A number for maximum gain in dB on digital microphone. + +Optional properties: +- reg: Pysical base address and length of shared memory region from EC. + It contains 3 unsigned 32-bit integer. The first 2 integers + combine to become an unsigned 64-bit physical address. The last + one integer is length of the shared memory. +- memory-region: Shared memory region to EC. A "shared-dma-pool". See + ../reserved-memory/reserved-memory.txt for details. Example: +{ + ... + + reserved_mem: reserved_mem { + compatible = "shared-dma-pool"; + reg = <0 0x52800000 0 0x100000>; + no-map; + }; +} + cros-ec@0 { compatible = "google,cros-ec-spi"; @@ -21,6 +38,7 @@ cros-ec@0 { cros_ec_codec: ec-codec { compatible = "google,cros-ec-codec"; #sound-dai-cells = <1>; - max-dmic-gain = <43>; + reg = <0x0 0x10500000 0x80000>; + memory-region = <&reserved_mem>; }; }; diff --git a/dts/Bindings/sound/mt8183-afe-pcm.txt b/dts/Bindings/sound/mt8183-afe-pcm.txt index 396ba38619..1f1cba4152 100644 --- a/dts/Bindings/sound/mt8183-afe-pcm.txt +++ b/dts/Bindings/sound/mt8183-afe-pcm.txt @@ -4,6 +4,10 @@ Required properties: - compatible = "mediatek,mt68183-audio"; - reg: register location and size - interrupts: should contain AFE interrupt +- resets: Must contain an entry for each entry in reset-names + See ../reset/reset.txt for details. +- reset-names: should have these reset names: + "audiosys"; - power-domains: should define the power domain - clocks: Must contain an entry for each entry in clock-names - clock-names: should have these clock names: @@ -20,6 +24,8 @@ Example: compatible = "mediatek,mt8183-audio"; reg = <0 0x11220000 0 0x1000>; interrupts = ; + resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>; + reset-names = "audiosys"; power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>; clocks = <&infrasys CLK_INFRA_AUDIO>, <&infrasys CLK_INFRA_AUDIO_26M_BCLK>, diff --git a/dts/Bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/dts/Bindings/sound/mt8183-mt6358-ts3a227-max98357.txt index d6d5207fa9..decaa013a0 100644 --- a/dts/Bindings/sound/mt8183-mt6358-ts3a227-max98357.txt +++ b/dts/Bindings/sound/mt8183-mt6358-ts3a227-max98357.txt @@ -2,14 +2,19 @@ MT8183 with MT6358, TS3A227 and MAX98357 CODECS Required properties: - compatible : "mediatek,mt8183_mt6358_ts3a227_max98357" -- mediatek,headset-codec: the phandles of ts3a227 codecs - mediatek,platform: the phandle of MT8183 ASoC platform +Optional properties: +- mediatek,headset-codec: the phandles of ts3a227 codecs +- mediatek,ec-codec: the phandle of EC codecs. + See google,cros-ec-codec.txt for more details. + Example: sound { compatible = "mediatek,mt8183_mt6358_ts3a227_max98357"; mediatek,headset-codec = <&ts3a227>; + mediatek,ec-codec = <&ec_codec>; mediatek,platform = <&afe>; }; diff --git a/dts/Bindings/sound/renesas,fsi.txt b/dts/Bindings/sound/renesas,fsi.txt deleted file mode 100644 index 0cf0f819b8..0000000000 --- a/dts/Bindings/sound/renesas,fsi.txt +++ /dev/null @@ -1,31 +0,0 @@ -Renesas FSI - -Required properties: -- compatible : "renesas,fsi2-", - "renesas,sh_fsi2" or "renesas,sh_fsi" as - fallback. - Examples with soctypes are: - - "renesas,fsi2-r8a7740" (R-Mobile A1) - - "renesas,fsi2-sh73a0" (SH-Mobile AG5) -- reg : Should contain the register physical address and length -- interrupts : Should contain FSI interrupt - -- fsia,spdif-connection : FSI is connected by S/PDIF -- fsia,stream-mode-support : FSI supports 16bit stream mode. -- fsia,use-internal-clock : FSI uses internal clock when master mode. - -- fsib,spdif-connection : same as fsia -- fsib,stream-mode-support : same as fsia -- fsib,use-internal-clock : same as fsia - -Example: - -sh_fsi2: sh_fsi2@ec230000 { - compatible = "renesas,sh_fsi2"; - reg = <0xec230000 0x400>; - interrupts = <0 146 0x4>; - - fsia,spdif-connection; - fsia,stream-mode-support; - fsia,use-internal-clock; -}; diff --git a/dts/Bindings/sound/renesas,fsi.yaml b/dts/Bindings/sound/renesas,fsi.yaml new file mode 100644 index 0000000000..140a37fc3c --- /dev/null +++ b/dts/Bindings/sound/renesas,fsi.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/renesas,fsi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas FSI Sound Driver Device Tree Bindings + +maintainers: + - Kuninori Morimoto + +properties: + $nodename: + pattern: "^sound@.*" + + compatible: + oneOf: + # for FSI2 SoC + - items: + - enum: + - renesas,fsi2-sh73a0 + - renesas,fsi2-r8a7740 + - enum: + - renesas,sh_fsi2 + # for Generic + - items: + - enum: + - renesas,sh_fsi + - renesas,sh_fsi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsia,spdif-connection: + $ref: /schemas/types.yaml#/definitions/flag + description: FSI is connected by S/PDIF + + fsia,stream-mode-support: + $ref: /schemas/types.yaml#/definitions/flag + description: FSI supports 16bit stream mode + + fsia,use-internal-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: FSI uses internal clock when master mode + + fsib,spdif-connection: + $ref: /schemas/types.yaml#/definitions/flag + description: same as fsia + + fsib,stream-mode-support: + $ref: /schemas/types.yaml#/definitions/flag + description: same as fsia + + fsib,use-internal-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: same as fsia + +required: + - compatible + - reg + - interrupts + +examples: + - | + sh_fsi2: sound@ec230000 { + compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; + reg = <0xec230000 0x400>; + interrupts = <0 146 0x4>; + + fsia,spdif-connection; + fsia,stream-mode-support; + fsia,use-internal-clock; + }; diff --git a/dts/Bindings/sound/renesas,rsnd.txt b/dts/Bindings/sound/renesas,rsnd.txt index 5c52182f7d..797fd03543 100644 --- a/dts/Bindings/sound/renesas,rsnd.txt +++ b/dts/Bindings/sound/renesas,rsnd.txt @@ -268,6 +268,7 @@ Required properties: - "renesas,rcar_sound-r8a7745" (RZ/G1E) - "renesas,rcar_sound-r8a77470" (RZ/G1C) - "renesas,rcar_sound-r8a774a1" (RZ/G2M) + - "renesas,rcar_sound-r8a774b1" (RZ/G2N) - "renesas,rcar_sound-r8a774c0" (RZ/G2E) - "renesas,rcar_sound-r8a7778" (R-Car M1A) - "renesas,rcar_sound-r8a7779" (R-Car H1) diff --git a/dts/Bindings/sound/rockchip-max98090.txt b/dts/Bindings/sound/rockchip-max98090.txt index a805aa99ad..e9c58b2043 100644 --- a/dts/Bindings/sound/rockchip-max98090.txt +++ b/dts/Bindings/sound/rockchip-max98090.txt @@ -5,15 +5,38 @@ Required properties: - rockchip,model: The user-visible name of this sound complex - rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's connected to the CODEC -- rockchip,audio-codec: The phandle of the MAX98090 audio codec -- rockchip,headset-codec: The phandle of Ext chip for jack detection + +Optional properties: +- rockchip,audio-codec: The phandle of the MAX98090 audio codec. +- rockchip,headset-codec: The phandle of Ext chip for jack detection. This is + required if there is rockchip,audio-codec. +- rockchip,hdmi-codec: The phandle of HDMI device for HDMI codec. Example: +/* For max98090-only board. */ +sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&max98090>; + rockchip,headset-codec = <&headsetcodec>; +}; + +/* For HDMI-only board. */ +sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,hdmi-codec = <&hdmi>; +}; + +/* For max98090 plus HDMI board. */ sound { compatible = "rockchip,rockchip-audio-max98090"; rockchip,model = "ROCKCHIP-I2S"; rockchip,i2s-controller = <&i2s>; rockchip,audio-codec = <&max98090>; rockchip,headset-codec = <&headsetcodec>; + rockchip,hdmi-codec = <&hdmi>; }; diff --git a/dts/Bindings/sound/rt1011.txt b/dts/Bindings/sound/rt1011.txt index 35a23e60d6..02d53b9aa2 100644 --- a/dts/Bindings/sound/rt1011.txt +++ b/dts/Bindings/sound/rt1011.txt @@ -20,6 +20,14 @@ Required properties: | 1 | 1 | 0x3b | ------------------------------------- +Optional properties: + +- realtek,temperature_calib + u32. The temperature was measured while doing the calibration. Units: Celsius degree + +- realtek,r0_calib + u32. This is r0 calibration data which was measured in factory mode. + Pins on the device (for linking into audio routes) for RT1011: * SPO @@ -29,4 +37,6 @@ Example: rt1011: codec@38 { compatible = "realtek,rt1011"; reg = <0x38>; + realtek,temperature_calib = <25>; + realtek,r0_calib = <0x224050>; }; diff --git a/dts/Bindings/sound/rt5682.txt b/dts/Bindings/sound/rt5682.txt index 312e9a1295..30e927a283 100644 --- a/dts/Bindings/sound/rt5682.txt +++ b/dts/Bindings/sound/rt5682.txt @@ -27,6 +27,11 @@ Optional properties: - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. +- realtek,btndet-delay + The debounce delay for push button. + The delay time is realtek,btndet-delay value multiple of 8.192 ms. + If absent, the default is 16. + Pins on the device (for linking into audio routes) for RT5682: * DMIC L1 @@ -47,4 +52,5 @@ rt5682 { realtek,dmic1-data-pin = <1>; realtek,dmic1-clk-pin = <1>; realtek,jd-src = <1>; + realtek,btndet-delay = <16>; }; diff --git a/dts/Bindings/sound/samsung,odroid.txt b/dts/Bindings/sound/samsung,odroid.txt deleted file mode 100644 index e9da2200e1..0000000000 --- a/dts/Bindings/sound/samsung,odroid.txt +++ /dev/null @@ -1,54 +0,0 @@ -Samsung Exynos Odroid XU3/XU4 audio complex with MAX98090 codec - -Required properties: - - - compatible - "hardkernel,odroid-xu3-audio" - for Odroid XU3 board, - "hardkernel,odroid-xu4-audio" - for Odroid XU4 board (deprecated), - "samsung,odroid-xu3-audio" - for Odroid XU3 board (deprecated), - "samsung,odroid-xu4-audio" - for Odroid XU4 board (deprecated) - - model - the user-visible name of this sound complex - - clocks - should contain entries matching clock names in the clock-names - property - - samsung,audio-widgets - this property specifies off-codec audio elements - like headphones or speakers, for details see widgets.txt - - samsung,audio-routing - a list of the connections between audio - components; each entry is a pair of strings, the first being the - connection's sink, the second being the connection's source; - valid names for sources and sinks are the MAX98090's pins (as - documented in its binding), and the jacks on the board - - For Odroid X2: - "Headphone Jack", "Mic Jack", "DMIC" - - For Odroid U3, XU3: - "Headphone Jack", "Speakers" - - For Odroid XU4: - no entries - -Required sub-nodes: - - - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S - controller - - 'codec' subnode with a 'sound-dai' property containing list of phandles - to the CODEC nodes, first entry must be corresponding to the MAX98090 - CODEC and the second entry must be the phandle of the HDMI IP block node - -Example: - -sound { - compatible = "hardkernel,odroid-xu3-audio"; - model = "Odroid-XU3"; - samsung,audio-routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "IN1", "Mic Jack", - "Mic Jack", "MICBIAS"; - - cpu { - sound-dai = <&i2s0 0>; - }; - codec { - sound-dai = <&hdmi>, <&max98090>; - }; -}; diff --git a/dts/Bindings/sound/samsung,odroid.yaml b/dts/Bindings/sound/samsung,odroid.yaml new file mode 100644 index 0000000000..c6b244352d --- /dev/null +++ b/dts/Bindings/sound/samsung,odroid.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/samsung,odroid.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos Odroid XU3/XU4 audio complex with MAX98090 codec + +maintainers: + - Krzysztof Kozlowski + - Sylwester Nawrocki + +properties: + compatible: + oneOf: + - const: hardkernel,odroid-xu3-audio + + - const: hardkernel,odroid-xu4-audio + deprecated: true + + - const: samsung,odroid-xu3-audio + deprecated: true + + - const: samsung,odroid-xu4-audio + deprecated: true + + model: + $ref: /schemas/types.yaml#/definitions/string + description: The user-visible name of this sound complex. + + cpu: + type: object + properties: + sound-dai: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: phandles to the I2S controllers + + codec: + type: object + properties: + sound-dai: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: | + List of phandles to the CODEC nodes, + first entry must be corresponding to the MAX98090 CODEC and + the second entry must be the phandle of the HDMI IP block node. + + samsung,audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + List of the connections between audio + components; each entry is a pair of strings, the first being the + connection's sink, the second being the connection's source; + valid names for sources and sinks are the MAX98090's pins (as + documented in its binding), and the jacks on the board. + For Odroid X2: "Headphone Jack", "Mic Jack", "DMIC" + For Odroid U3, XU3: "Headphone Jack", "Speakers" + For Odroid XU4: no entries + + samsung,audio-widgets: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + This property specifies off-codec audio elements + like headphones or speakers, for details see widgets.txt + +required: + - compatible + - model + - cpu + - codec + +examples: + - | + sound { + compatible = "hardkernel,odroid-xu3-audio"; + model = "Odroid-XU3"; + samsung,audio-routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "IN1", "Mic Jack", + "Mic Jack", "MICBIAS"; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&hdmi>, <&max98090>; + }; + }; + diff --git a/dts/Bindings/sound/samsung-i2s.txt b/dts/Bindings/sound/samsung-i2s.txt deleted file mode 100644 index a88cb00fa0..0000000000 --- a/dts/Bindings/sound/samsung-i2s.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Samsung I2S controller - -Required SoC Specific Properties: - -- compatible : should be one of the following. - - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. - - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with - secondary fifo, s/w reset control and internal mux for root clk src. - - samsung,exynos5420-i2s: for 8/16/24bit multichannel(5.1) I2S for - playback, stereo channel capture, secondary fifo using internal - or external dma, s/w reset control, internal mux for root clk src - and 7.1 channel TDM support for playback. TDM (Time division multiplexing) - is to allow transfer of multiple channel audio data on single data line. - - samsung,exynos7-i2s: with all the available features of exynos5 i2s, - exynos7 I2S has 7.1 channel TDM support for capture, secondary fifo - with only external dma and more no.of root clk sampling frequencies. - - samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports - stereo channels. exynos7 i2s1 upgraded to 5.1 multichannel with - slightly modified bit offsets. - -- reg: physical base address of the controller and length of memory mapped - region. -- dmas: list of DMA controller phandle and DMA request line ordered pairs. -- dma-names: identifier string for each DMA request line in the dmas property. - These strings correspond 1:1 with the ordered pairs in dmas. -- clocks: Handle to iis clock and RCLK source clk. -- clock-names: - i2s0 uses some base clocks from CMU and some are from audio subsystem internal - clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and - "i2s_opclk1" as shown in the example below. - i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should - be "iis" and "i2s_opclk0". - "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root - clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2 - doesn't have any such mux. -- #clock-cells: should be 1, this property must be present if the I2S device - is a clock provider in terms of the common clock bindings, described in - ../clock/clock-bindings.txt. -- clock-output-names (deprecated): from the common clock bindings, names of - the CDCLK I2S output clocks, suggested values are "i2s_cdclk0", "i2s_cdclk1", - "i2s_cdclk3" for the I2S0, I2S1, I2S2 devices respectively. - -There are following clocks available at the I2S device nodes: - CLK_I2S_CDCLK - the CDCLK (CODECLKO) gate clock, - CLK_I2S_RCLK_PSR - the RCLK prescaler divider clock (corresponding to the - IISPSR register), - CLK_I2S_RCLK_SRC - the RCLKSRC mux clock (corresponding to RCLKSRC bit in - IISMOD register). - -Refer to the SoC datasheet for availability of the above clocks. -The CLK_I2S_RCLK_PSR and CLK_I2S_RCLK_SRC clocks are usually only available -in the IIS Multi Audio Interface. - -Note: Old DTs may not have the #clock-cells property and then not use the I2S -node as a clock supplier. - -Optional SoC Specific Properties: - -- samsung,idma-addr: Internal DMA register base address of the audio - sub system(used in secondary sound source). -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". -- #sound-dai-cells: should be 1. - - -Example: - -i2s0: i2s@3830000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - #clock-cells = <1>; - samsung,idma-addr = <0x03000000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - #sound-dai-cells = <1>; -}; diff --git a/dts/Bindings/sound/samsung-i2s.yaml b/dts/Bindings/sound/samsung-i2s.yaml new file mode 100644 index 0000000000..53e3bad417 --- /dev/null +++ b/dts/Bindings/sound/samsung-i2s.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/samsung-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC I2S controller + +maintainers: + - Krzysztof Kozlowski + - Sylwester Nawrocki + +properties: + compatible: + description: | + samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. + + samsung,s5pv210-i2s: for 8/16/24bit multichannel (5.1) I2S with + secondary FIFO, s/w reset control and internal mux for root clock + source. + + samsung,exynos5420-i2s: for 8/16/24bit multichannel (5.1) I2S for + playback, stereo channel capture, secondary FIFO using internal + or external DMA, s/w reset control, internal mux for root clock + source and 7.1 channel TDM support for playback; TDM (Time division + multiplexing) is to allow transfer of multiple channel audio data on + single data line. + + samsung,exynos7-i2s: with all the available features of Exynos5 I2S. + Exynos7 I2S has 7.1 channel TDM support for capture, secondary FIFO + with only external DMA and more number of root clock sampling + frequencies. + + samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports + stereo channels. Exynos7 I2S1 upgraded to 5.1 multichannel with + slightly modified bit offsets. + enum: + - samsung,s3c6410-i2s + - samsung,s5pv210-i2s + - samsung,exynos5420-i2s + - samsung,exynos7-i2s + - samsung,exynos7-i2s1 + + reg: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 3 + + dma-names: + oneOf: + - items: + - const: tx + - const: rx + - items: + - const: tx + - const: rx + - const: tx-sec + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - const: iis + - items: # for I2S0 + - const: iis + - const: i2s_opclk0 + - const: i2s_opclk1 + - items: # for I2S1 and I2S2 + - const: iis + - const: i2s_opclk0 + description: | + "iis" is the I2S bus clock and i2s_opclk0, i2s_opclk1 are sources + of the root clock. I2S0 has internal mux to select the source + of root clock and I2S1 and I2S2 doesn't have any such mux. + + "#clock-cells": + const: 1 + + clock-output-names: + deprecated: true + oneOf: + - items: # for I2S0 + - const: i2s_cdclk0 + - items: # for I2S1 + - const: i2s_cdclk1 + - items: # for I2S2 + - const: i2s_cdclk2 + description: Names of the CDCLK I2S output clocks. + + samsung,idma-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Internal DMA register base address of the audio + subsystem (used in secondary sound source). + + pinctrl-0: + description: Should specify pin control groups used for this controller. + + pinctrl-names: + const: default + + "#sound-dai-cells": + const: 1 + +required: + - compatible + - reg + - dmas + - dma-names + - clocks + - clock-names + +examples: + - | + #include + + i2s0: i2s@3830000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <1>; + }; diff --git a/dts/Bindings/sound/sun4i-codec.txt b/dts/Bindings/sound/sun4i-codec.txt deleted file mode 100644 index 66579bbd32..0000000000 --- a/dts/Bindings/sound/sun4i-codec.txt +++ /dev/null @@ -1,94 +0,0 @@ -* Allwinner A10 Codec - -Required properties: -- compatible: must be one of the following compatibles: - - "allwinner,sun4i-a10-codec" - - "allwinner,sun6i-a31-codec" - - "allwinner,sun7i-a20-codec" - - "allwinner,sun8i-a23-codec" - - "allwinner,sun8i-h3-codec" - - "allwinner,sun8i-v3s-codec" -- reg: must contain the registers location and length -- interrupts: must contain the codec interrupt -- dmas: DMA channels for tx and rx dma. See the DMA client binding, - Documentation/devicetree/bindings/dma/dma.txt -- dma-names: should include "tx" and "rx". -- clocks: a list of phandle + clock-specifer pairs, one for each entry - in clock-names. -- clock-names: should contain the following: - - "apb": the parent APB clock for this controller - - "codec": the parent module clock - -Optional properties: -- allwinner,pa-gpios: gpio to enable external amplifier - -Required properties for the following compatibles: - - "allwinner,sun6i-a31-codec" - - "allwinner,sun8i-a23-codec" - - "allwinner,sun8i-h3-codec" - - "allwinner,sun8i-v3s-codec" -- resets: phandle to the reset control for this device -- allwinner,audio-routing: A list of the connections between audio components. - Each entry is a pair of strings, the first being the - connection's sink, the second being the connection's - source. Valid names include: - - Audio pins on the SoC: - "HP" - "HPCOM" - "LINEIN" (not on sun8i-v3s) - "LINEOUT" (not on sun8i-a23 or sun8i-v3s) - "MIC1" - "MIC2" (not on sun8i-v3s) - "MIC3" (sun6i-a31 only) - - Microphone biases from the SoC: - "HBIAS" - "MBIAS" (not on sun8i-v3s) - - Board connectors: - "Headphone" - "Headset Mic" - "Line In" - "Line Out" - "Mic" - "Speaker" - -Required properties for the following compatibles: - - "allwinner,sun8i-a23-codec" - - "allwinner,sun8i-h3-codec" - - "allwinner,sun8i-v3s-codec" -- allwinner,codec-analog-controls: A phandle to the codec analog controls - block in the PRCM. - -Example: -codec: codec@1c22c00 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun7i-a20-codec"; - reg = <0x01c22c00 0x40>; - interrupts = <0 30 4>; - clocks = <&apb0_gates 0>, <&codec_clk>; - clock-names = "apb", "codec"; - dmas = <&dma 0 19>, <&dma 0 19>; - dma-names = "rx", "tx"; -}; - -codec: codec@1c22c00 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun6i-a31-codec"; - reg = <0x01c22c00 0x98>; - interrupts = ; - clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>; - clock-names = "apb", "codec"; - resets = <&ccu RST_APB1_CODEC>; - dmas = <&dma 15>, <&dma 15>; - dma-names = "rx", "tx"; - allwinner,audio-routing = - "Headphone", "HP", - "Speaker", "LINEOUT", - "LINEIN", "Line In", - "MIC1", "MBIAS", - "MIC1", "Mic", - "MIC2", "HBIAS", - "MIC2", "Headset Mic"; -}; diff --git a/dts/Bindings/sound/sun8i-codec-analog.txt b/dts/Bindings/sound/sun8i-codec-analog.txt deleted file mode 100644 index 07356758bd..0000000000 --- a/dts/Bindings/sound/sun8i-codec-analog.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Allwinner Codec Analog Controls - -Required properties: -- compatible: must be one of the following compatibles: - - "allwinner,sun8i-a23-codec-analog" - - "allwinner,sun8i-h3-codec-analog" - - "allwinner,sun8i-v3s-codec-analog" - -Required properties if not a sub-node of the PRCM node: -- reg: must contain the registers location and length - -Example: -prcm: prcm@1f01400 { - codec_analog: codec-analog { - compatible = "allwinner,sun8i-a23-codec-analog"; - }; -}; diff --git a/dts/Bindings/sound/tas2562.txt b/dts/Bindings/sound/tas2562.txt new file mode 100644 index 0000000000..658e1fb18a --- /dev/null +++ b/dts/Bindings/sound/tas2562.txt @@ -0,0 +1,34 @@ +Texas Instruments TAS2562 Smart PA + +The TAS2562 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior. + +Required properties: + - #address-cells - Should be <1>. + - #size-cells - Should be <0>. + - compatible: - Should contain "ti,tas2562". + - reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f. + - ti,imon-slot-no:- TDM TX current sense time slot. + +Optional properties: +- interrupt-parent: phandle to the interrupt controller which provides + the interrupt. +- interrupts: (GPIO) interrupt to which the chip is connected. +- shut-down: GPIO used to control the state of the device. + +Examples: +tas2562@4c { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tas2562"; + reg = <0x4c>; + + interrupt-parent = <&gpio1>; + interrupts = <14>; + + shut-down = <&gpio1 15 0>; + ti,imon-slot-no = <0>; +}; + diff --git a/dts/Bindings/sound/tas2770.txt b/dts/Bindings/sound/tas2770.txt new file mode 100644 index 0000000000..ede6bb3d96 --- /dev/null +++ b/dts/Bindings/sound/tas2770.txt @@ -0,0 +1,37 @@ +Texas Instruments TAS2770 Smart PA + +The TAS2770 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior. + +Required properties: + + - compatible: - Should contain "ti,tas2770". + - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>. + - #address-cells - Should be <1>. + - #size-cells - Should be <0>. + - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling. + - ti,imon-slot-no:- TDM TX current sense time slot. + - ti,vmon-slot-no:- TDM TX voltage sense time slot. + +Optional properties: + +- interrupt-parent: the phandle to the interrupt controller which provides + the interrupt. +- interrupts: interrupt specification for data-ready. + +Examples: + + tas2770@4c { + compatible = "ti,tas2770"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&msm_gpio>; + interrupts = <97 0>; + ti,asi-format = <0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + diff --git a/dts/Bindings/sound/ti,pcm3168a.txt b/dts/Bindings/sound/ti,pcm3168a.txt index 5d9cb84c66..a02ecaab51 100644 --- a/dts/Bindings/sound/ti,pcm3168a.txt +++ b/dts/Bindings/sound/ti,pcm3168a.txt @@ -25,6 +25,13 @@ Required properties: For required properties on SPI/I2C, consult SPI/I2C device tree documentation +Optional properties: + + - reset-gpios : Optional reset gpio line connected to RST pin of the codec. + The RST line is low active: + RST = low: device power-down + RST = high: device is enabled + Examples: i2c0: i2c0@0 { @@ -34,6 +41,7 @@ i2c0: i2c0@0 { pcm3168a: audio-codec@44 { compatible = "ti,pcm3168a"; reg = <0x44>; + reset-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; clocks = <&clk_core CLK_AUDIO>; clock-names = "scki"; VDD1-supply = <&supply3v3>; diff --git a/dts/Bindings/sound/tlv320aic31xx.txt b/dts/Bindings/sound/tlv320aic31xx.txt index 5b3c33bb99..e372303697 100644 --- a/dts/Bindings/sound/tlv320aic31xx.txt +++ b/dts/Bindings/sound/tlv320aic31xx.txt @@ -29,6 +29,11 @@ Optional properties: 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD If this node is not mentioned or if the value is unknown, then micbias is set to 2.0V. +- ai31xx-ocmv - output common-mode voltage setting + 0 - 1.35V, + 1 - 1.5V, + 2 - 1.65V, + 3 - 1.8V Deprecated properties: -- cgit v1.2.3