From a40531fb3c11dc4ee8cca43c91b471da1fd3c1ab Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 10 Jan 2017 08:26:15 +0100 Subject: dts: update to v4.10-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/sound/axentia,tse850-pcm5142.txt | 88 +++++++++++++++++++ dts/Bindings/sound/cs35l34.txt | 64 ++++++++++++++ dts/Bindings/sound/cs42l42.txt | 110 ++++++++++++++++++++++++ dts/Bindings/sound/davinci-mcbsp.txt | 2 +- dts/Bindings/sound/qcom,apq8016-sbc.txt | 5 +- dts/Bindings/sound/qcom,msm8916-wcd-analog.txt | 85 ++++++++++++++++++ dts/Bindings/sound/qcom,msm8916-wcd-digital.txt | 20 +++++ dts/Bindings/sound/rt5514.txt | 3 + dts/Bindings/sound/rt5663.txt | 6 +- dts/Bindings/sound/rt5665.txt | 68 +++++++++++++++ dts/Bindings/sound/samsung,tm2-audio.txt | 38 ++++++++ dts/Bindings/sound/sun4i-codec.txt | 65 +++++++++++++- dts/Bindings/sound/sun8i-codec-analog.txt | 16 ++++ dts/Bindings/sound/tlv320aic31xx.txt | 1 + dts/Bindings/sound/wm8580.txt | 4 +- 15 files changed, 564 insertions(+), 11 deletions(-) create mode 100644 dts/Bindings/sound/axentia,tse850-pcm5142.txt create mode 100644 dts/Bindings/sound/cs35l34.txt create mode 100644 dts/Bindings/sound/cs42l42.txt create mode 100644 dts/Bindings/sound/qcom,msm8916-wcd-analog.txt create mode 100644 dts/Bindings/sound/qcom,msm8916-wcd-digital.txt create mode 100755 dts/Bindings/sound/rt5665.txt create mode 100644 dts/Bindings/sound/samsung,tm2-audio.txt create mode 100644 dts/Bindings/sound/sun8i-codec-analog.txt (limited to 'dts/Bindings/sound') diff --git a/dts/Bindings/sound/axentia,tse850-pcm5142.txt b/dts/Bindings/sound/axentia,tse850-pcm5142.txt new file mode 100644 index 0000000000..5b9b38f578 --- /dev/null +++ b/dts/Bindings/sound/axentia,tse850-pcm5142.txt @@ -0,0 +1,88 @@ +Devicetree bindings for the Axentia TSE-850 audio complex + +Required properties: + - compatible: "axentia,tse850-pcm5142" + - axentia,ssc-controller: The phandle of the atmel SSC controller used as + cpu dai. + - axentia,audio-codec: The phandle of the PCM5142 codec. + - axentia,add-gpios: gpio specifier that controls the mixer. + - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1. + - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2. + - axentia,ana-supply: Regulator that supplies the output amplifier. Must + support voltages in the 2V - 20V range, in 1V steps. + +The schematics explaining the gpios are as follows: + + loop1 relays + IN1 +---o +------------+ o---+ OUT1 + \ / + + + + | / | + +--o +--. | + | add | | + | V | + | .---. | + DAC +----------->|Sum|---+ + | '---' | + | | + + + + + IN2 +---o--+------------+--o---+ OUT2 + loop2 relays + +The 'loop1' gpio pin controlls two relays, which are either in loop position, +meaning that input and output are directly connected, or they are in mixer +position, meaning that the signal is passed through the 'Sum' mixer. Similarly +for 'loop2'. + +In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer +(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays +are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2 +are TSE-850 connectors and DAC is the PCB name of the (filtered) output from +the PCM5142 codec. + +Example: + + &i2c { + codec: pcm5142@4c { + compatible = "ti,pcm5142"; + + reg = <0x4c>; + + AVDD-supply = <®_3v3>; + DVDD-supply = <®_3v3>; + CPVDD-supply = <®_3v3>; + + clocks = <&sck>; + + pll-in = <3>; + pll-out = <6>; + }; + }; + + ana: ana-reg { + compatible = "pwm-regulator"; + + regulator-name = "ANA"; + + pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>; + pwm-dutycycle-unit = <1000>; + pwm-dutycycle-range = <100 1000>; + + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <20000000>; + regulator-ramp-delay = <1000>; + }; + + sound { + compatible = "axentia,tse850-pcm5142"; + + axentia,ssc-controller = <&ssc0>; + axentia,audio-codec = <&codec>; + + axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; + axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>; + + axentia,ana-supply = <&ana>; + }; diff --git a/dts/Bindings/sound/cs35l34.txt b/dts/Bindings/sound/cs35l34.txt new file mode 100644 index 0000000000..b218ead2e6 --- /dev/null +++ b/dts/Bindings/sound/cs35l34.txt @@ -0,0 +1,64 @@ +CS35L34 Speaker Amplifier + +Required properties: + + - compatible : "cirrus,cs35l34" + + - reg : the I2C address of the device for I2C. + + - VA-supply, VP-supply : power supplies for the device, + as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + - cirrus,boost-vtge-millivolt : Boost Voltage Value. Configures the boost + converter's output voltage in mV. The range is from VP to 8V with + increments of 100mV. + + - cirrus,boost-nanohenry: Inductor value for boost converter. The value is + in nH and they can be values of 1000nH, 1100nH, 1200nH, 1500nH, and 2200nH. + +Optional properties: + + - reset-gpios: GPIO used to reset the amplifier. + + - interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from CS35L34 are delivered to. + - interrupts : IRQ line info CS35L34. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + for further information relating to interrupt properties) + + - cirrus,boost-peak-milliamp : Boost converter peak current limit in mA. The + range starts at 1200mA and goes to a maximum of 3840mA with increments of + 80mA. The default value is 2480mA. + + - cirrus,i2s-sdinloc : ADSP SDIN I2S channel location. Indicates whether the + received mono data is in the left or right portion of the I2S frame + according to the AD0 pin or directly via this configuration. + 0x0 (Default) = Selected by AD0 input (if AD0 = LOW, use left channel), + 0x2 = Left, + 0x1 = Selected by the inversion of the AD0 input (if AD0 = LOW, use right + channel), + 0x3 = Right. + + - cirrus,gain-zc-disable: Boolean property. If set, the gain change will take + effect without waiting for a zero cross. + + - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of + SCLK. Otherwise, data is on the falling edge of SCLK. + + +Example: + +cs35l34: cs35l34@40 { + compatible = "cirrus,cs35l34"; + reg = <0x40>; + + interrupt-parent = <&gpio8>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&gpio 10 0>; + + cirrus,boost-vtge-milltvolt = <8000>; /* 8V */ + cirrus,boost-ind-nanohenry = <1000>; /* 1uH */ + cirrus,boost-peak-milliamp = <3000>; /* 3A */ +}; diff --git a/dts/Bindings/sound/cs42l42.txt b/dts/Bindings/sound/cs42l42.txt new file mode 100644 index 0000000000..9a2c5e2423 --- /dev/null +++ b/dts/Bindings/sound/cs42l42.txt @@ -0,0 +1,110 @@ +CS42L42 audio CODEC + +Required properties: + + - compatible : "cirrus,cs42l42" + + - reg : the I2C address of the device for I2C. + + - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply : + power supplies for the device, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + + - interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from CS42L42 are delivered to. + + - interrupts : IRQ line info CS42L42. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + for further information relating to interrupt properties) + + - cirrus,ts-inv : Boolean property. For jacks that invert the tip sense + polarity. Normal jacks will short tip sense pin to HS1 when headphones are + plugged in and leave tip sense floating when not plugged in. Inverting jacks + short tip sense when unplugged and float when plugged in. + + 0 = (Default) Non-inverted + 1 = Inverted + + - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no + debounce, the tip sense pin might be noisy on a plug event. + + 0 - 0ms, + 1 - 125ms, + 2 - 250ms, + 3 - 500ms, + 4 - 750ms, + 5 - (Default) 1s, + 6 - 1.25s, + 7 - 1.5s, + + - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG. + With no debounce, the tip sense pin might be noisy on an unplug event. + + 0 - 0ms, + 1 - 125ms, + 2 - 250ms, + 3 - 500ms, + 4 - 750ms, + 5 - (Default) 1s, + 6 - 1.25s, + 7 - 1.5s, + + - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after + enabling button detection interrupts. After auto-detection and before + servicing button interrupts, the HS bias needs time to settle. If you + don't wait, there is possibility for erroneous button interrupt. + + 0ms - 200ms, + Default = 100ms + + - cirrus,btn-det-event-dbnce : This sets how long the driver delays after + receiving a button press interrupt. With level detect interrupts, you want + to wait a small amount of time to make sure the button press is making a + clean connection with the bias resistors. + + 0ms - 20ms, + Default = 10ms + + - cirrus,bias-lvls : For a level-detect headset button scheme, each button + will bias the mic pin to a certain voltage. To determine which button was + pressed, the driver will compare this biased voltage to sequential, + decreasing voltages and will stop when a comparator is tripped, + indicating a comparator voltage < bias voltage. This value represents a + percentage of the internally generated HS bias voltage. For different + hardware setups, a designer might want to tweak this. This is an array of + descending values for the comparator voltage. + + Array of 4 values + Each 0-63 + < x1 x2 x3 x4 > + Default = < 15 8 4 1> + + +Example: + +cs42l42: cs42l42@48 { + compatible = "cirrus,cs42l42"; + reg = <0x48>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + VCP-supply = <&dummy_vreg>; + VD_FILT-supply = <&dummy_vreg>; + VL-supply = <&dummy_vreg>; + + reset-gpios = <&axi_gpio_0 1 0>; + interrupt-parent = <&gpio0>; + interrupts = <55 8> + + cirrus,ts-inv = <0x00>; + cirrus,ts-dbnc-rise = <0x05>; + cirrus,ts-dbnc-fall = <0x00>; + cirrus,btn-det-init-dbnce = <100>; + cirrus,btn-det-event-dbnce = <10>; + cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>; + cirrus,hs-bias-ramp-rate = <0x02>; +}; \ No newline at end of file diff --git a/dts/Bindings/sound/davinci-mcbsp.txt b/dts/Bindings/sound/davinci-mcbsp.txt index 55b53e1fd7..e0b6165c9c 100644 --- a/dts/Bindings/sound/davinci-mcbsp.txt +++ b/dts/Bindings/sound/davinci-mcbsp.txt @@ -43,7 +43,7 @@ mcbsp0: mcbsp@1d10000 { <0x00310000 0x1000>; reg-names = "mpu", "dat"; interrupts = <97 98>; - interrupts-names = "rx", "tx"; + interrupt-names = "rx", "tx"; dmas = <&edma0 3 1 &edma0 2 1>; dma-names = "tx", "rx"; diff --git a/dts/Bindings/sound/qcom,apq8016-sbc.txt b/dts/Bindings/sound/qcom,apq8016-sbc.txt index d9d8635ff9..6a4aadc4ce 100644 --- a/dts/Bindings/sound/qcom,apq8016-sbc.txt +++ b/dts/Bindings/sound/qcom,apq8016-sbc.txt @@ -44,8 +44,7 @@ Required dai-link subnodes: Required CPU/CODEC subnodes properties: -link-name : Name of the dai link. --sound-dai : phandle and port of CPU/CODEC --capture-dai : phandle and port of CPU/CODEC +-sound-dai : phandle/s and port of CPU/CODEC Example: @@ -73,7 +72,7 @@ sound: sound { sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; }; }; diff --git a/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt new file mode 100644 index 0000000000..ccb401cfef --- /dev/null +++ b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt @@ -0,0 +1,85 @@ +msm8916 analog audio CODEC + +Bindings for codec Analog IP which is integrated in pmic pm8916, + +## Bindings for codec core on pmic: + +Required properties + - compatible = "qcom,pm8916-wcd-analog-codec"; + - reg: represents the slave base address provided to the peripheral. + - interrupt-parent : The parent interrupt controller. + - interrupts: List of interrupts in given SPMI peripheral. + - interrupt-names: Names specified to above list of interrupts in same + order. List of supported interrupt names are: + "cdc_spk_cnp_int" - Speaker click and pop interrupt. + "cdc_spk_clip_int" - Speaker clip interrupt. + "cdc_spk_ocp_int" - Speaker over current protect interrupt. + "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1. + "mbhc_but_rel_det" - button release interrupt. + "mbhc_but_press_det" - button press event + "mbhc_ins_rem_det" - jack insert removal detect interrupt. + "mbhc_switch_int" - multi button headset interrupt. + "cdc_ear_ocp_int" - Earphone over current protect interrupt. + "cdc_hphr_ocp_int" - Headphone R over current protect interrupt. + "cdc_hphl_ocp_det" - Headphone L over current protect interrupt. + "cdc_ear_cnp_int" - earphone cnp interrupt. + "cdc_hphr_cnp_int" - hphr click and pop interrupt. + "cdc_hphl_cnp_int" - hphl click and pop interrupt. + + - clocks: Handle to mclk. + - clock-names: should be "mclk" + - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. + - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. + - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. + +Optional Properties: +- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor + connected. +- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor + connected. + +Example: + +spmi_bus { + ... + audio-codec@f000{ + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000 0x200>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + VDD-CDC-IO-supply = <&pm8916_l5>; + VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>; + VDD-MICBIAS-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; +}; diff --git a/dts/Bindings/sound/qcom,msm8916-wcd-digital.txt b/dts/Bindings/sound/qcom,msm8916-wcd-digital.txt new file mode 100644 index 0000000000..1c8e4cb251 --- /dev/null +++ b/dts/Bindings/sound/qcom,msm8916-wcd-digital.txt @@ -0,0 +1,20 @@ +msm8916 digital audio CODEC + +## Bindings for codec core in lpass: + +Required properties + - compatible = "qcom,msm8916-wcd-digital-codec"; + - reg: address space for lpass codec. + - clocks: Handle to mclk and ahbclk + - clock-names: should be "mclk", "ahbix-clk". + +Example: + +audio-codec@771c000{ + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; +}; diff --git a/dts/Bindings/sound/rt5514.txt b/dts/Bindings/sound/rt5514.txt index 9cabfc18cb..929ca6756b 100644 --- a/dts/Bindings/sound/rt5514.txt +++ b/dts/Bindings/sound/rt5514.txt @@ -13,6 +13,9 @@ Optional properties: - clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk" +- realtek,dmic-init-delay-ms + Set the DMIC initial delay (ms) to wait it ready. + Pins on the device (for linking into audio routes) for RT5514: * DMIC1L diff --git a/dts/Bindings/sound/rt5663.txt b/dts/Bindings/sound/rt5663.txt index 7d3c974c6e..70eaeaed2b 100644 --- a/dts/Bindings/sound/rt5663.txt +++ b/dts/Bindings/sound/rt5663.txt @@ -1,10 +1,10 @@ -RT5663/RT5668 audio CODEC +RT5663 audio CODEC This device supports I2C only. Required properties: -- compatible : One of "realtek,rt5663" or "realtek,rt5668". +- compatible : "realtek,rt5663". - reg : The I2C address of the device. @@ -12,7 +12,7 @@ Required properties: Optional properties: -Pins on the device (for linking into audio routes) for RT5663/RT5668: +Pins on the device (for linking into audio routes) for RT5663: * IN1P * IN1N diff --git a/dts/Bindings/sound/rt5665.txt b/dts/Bindings/sound/rt5665.txt new file mode 100755 index 0000000000..419c892196 --- /dev/null +++ b/dts/Bindings/sound/rt5665.txt @@ -0,0 +1,68 @@ +RT5665/RT5666/RT5668 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : One of "realtek,rt5665", "realtek,rt5666" or "realtek,rt5668". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +- realtek,in1-differential +- realtek,in2-differential +- realtek,in3-differential +- realtek,in4-differential + Boolean. Indicate MIC1/2/3/4 input are differential, rather than single-ended. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using GPIO4 pin as dmic1 data pin + 2: using IN2N pin as dmic2 data pin + +- realtek,dmic2-data-pin + 0: dmic2 is not used + 1: using GPIO5 pin as dmic2 data pin + 2: using IN2P pin as dmic2 data pin + +- realtek,jd-src + 0: No JD is used + 1: using JD1 as JD source + +- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. + +Pins on the device (for linking into audio routes) for RT5659/RT5658: + + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * IN3P + * IN3N + * IN4P + * IN4N + * HPOL + * HPOR + * LOUTL + * LOUTR + * MONOOUT + * PDML + * PDMR + +Example: + +rt5659 { + compatible = "realtek,rt5665"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = ; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; +}; diff --git a/dts/Bindings/sound/samsung,tm2-audio.txt b/dts/Bindings/sound/samsung,tm2-audio.txt new file mode 100644 index 0000000000..94442e5673 --- /dev/null +++ b/dts/Bindings/sound/samsung,tm2-audio.txt @@ -0,0 +1,38 @@ +Samsung Exynos5433 TM2(E) audio complex with WM5110 codec + +Required properties: + + - compatible : "samsung,tm2-audio" + - model : the user-visible name of this sound complex + - audio-codec : the phandle of the wm5110 audio codec node, + as described in ../mfd/arizona.txt + - i2s-controller : the phandle of the I2S controller + - audio-amplifier : the phandle of the MAX98504 amplifier + - samsung,audio-routing : a list of the connections between audio components; + each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source; valid names for sources and sinks are the + WM5110's and MAX98504's pins and the jacks on the + board: HP, SPK, Main Mic, Sub Mic, Third Mic, + Headset Mic + - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator + + +Example: + +sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 0>; + model = "wm5110"; + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + "Main Mic", "MICBIAS2", + "IN1R", "Main Mic"; +}; diff --git a/dts/Bindings/sound/sun4i-codec.txt b/dts/Bindings/sound/sun4i-codec.txt index 0dce690f78..3033bd8aab 100644 --- a/dts/Bindings/sound/sun4i-codec.txt +++ b/dts/Bindings/sound/sun4i-codec.txt @@ -1,8 +1,12 @@ * Allwinner A10 Codec Required properties: -- compatible: must be either "allwinner,sun4i-a10-codec" or - "allwinner,sun7i-a20-codec" +- compatible: must be one of the following compatibles: + - "allwinner,sun4i-a10-codec" + - "allwinner,sun6i-a31-codec" + - "allwinner,sun7i-a20-codec" + - "allwinner,sun8i-a23-codec" + - "allwinner,sun8i-h3-codec" - reg: must contain the registers location and length - interrupts: must contain the codec interrupt - dmas: DMA channels for tx and rx dma. See the DMA client binding, @@ -17,6 +21,43 @@ Required properties: Optional properties: - allwinner,pa-gpios: gpio to enable external amplifier +Required properties for the following compatibles: + - "allwinner,sun6i-a31-codec" + - "allwinner,sun8i-a23-codec" + - "allwinner,sun8i-h3-codec" +- resets: phandle to the reset control for this device +- allwinner,audio-routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names include: + + Audio pins on the SoC: + "HP" + "HPCOM" + "LINEIN" + "LINEOUT" (not on sun8i-a23) + "MIC1" + "MIC2" + "MIC3" (sun6i-a31 only) + + Microphone biases from the SoC: + "HBIAS" + "MBIAS" + + Board connectors: + "Headphone" + "Headset Mic" + "Line In" + "Line Out" + "Mic" + "Speaker" + +Required properties for the following compatibles: + - "allwinner,sun8i-a23-codec" + - "allwinner,sun8i-h3-codec" +- allwinner,codec-analog-controls: A phandle to the codec analog controls + block in the PRCM. + Example: codec: codec@01c22c00 { #sound-dai-cells = <0>; @@ -28,3 +69,23 @@ codec: codec@01c22c00 { dmas = <&dma 0 19>, <&dma 0 19>; dma-names = "rx", "tx"; }; + +codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-codec"; + reg = <0x01c22c00 0x98>; + interrupts = ; + clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>; + clock-names = "apb", "codec"; + resets = <&ccu RST_APB1_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,audio-routing = + "Headphone", "HP", + "Speaker", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "MBIAS", + "MIC1", "Mic", + "MIC2", "HBIAS", + "MIC2", "Headset Mic"; +}; diff --git a/dts/Bindings/sound/sun8i-codec-analog.txt b/dts/Bindings/sound/sun8i-codec-analog.txt new file mode 100644 index 0000000000..779b735781 --- /dev/null +++ b/dts/Bindings/sound/sun8i-codec-analog.txt @@ -0,0 +1,16 @@ +* Allwinner Codec Analog Controls + +Required properties: +- compatible: must be one of the following compatibles: + - "allwinner,sun8i-a23-codec-analog" + - "allwinner,sun8i-h3-codec-analog" + +Required properties if not a sub-node of the PRCM node: +- reg: must contain the registers location and length + +Example: +prcm: prcm@01f01400 { + codec_analog: codec-analog { + compatible = "allwinner,sun8i-a23-codec-analog"; + }; +}; diff --git a/dts/Bindings/sound/tlv320aic31xx.txt b/dts/Bindings/sound/tlv320aic31xx.txt index 9340d2ddcc..6fbba562ea 100644 --- a/dts/Bindings/sound/tlv320aic31xx.txt +++ b/dts/Bindings/sound/tlv320aic31xx.txt @@ -12,6 +12,7 @@ Required properties: "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP) "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP) "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP) + "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP) - reg - - I2C slave address - HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply, diff --git a/dts/Bindings/sound/wm8580.txt b/dts/Bindings/sound/wm8580.txt index 7d9821f348..78fce9b149 100644 --- a/dts/Bindings/sound/wm8580.txt +++ b/dts/Bindings/sound/wm8580.txt @@ -1,10 +1,10 @@ -WM8580 audio CODEC +WM8580 and WM8581 audio CODEC This device supports I2C only. Required properties: - - compatible : "wlf,wm8580" + - compatible : "wlf,wm8580", "wlf,wm8581" - reg : the I2C address of the device. -- cgit v1.2.3