From 6e6d9a2ff045f09d5a03e876becea5e6a1dabe90 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 8 Dec 2015 07:35:17 +0100 Subject: dts: update to v4.4-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/thermal/rockchip-thermal.txt | 11 +++++++++-- dts/Bindings/thermal/ti_soc_thermal.txt | 14 ++++++++++++++ 2 files changed, 23 insertions(+), 2 deletions(-) (limited to 'dts/Bindings/thermal') diff --git a/dts/Bindings/thermal/rockchip-thermal.txt b/dts/Bindings/thermal/rockchip-thermal.txt index ef802de495..b38200d258 100644 --- a/dts/Bindings/thermal/rockchip-thermal.txt +++ b/dts/Bindings/thermal/rockchip-thermal.txt @@ -12,6 +12,11 @@ Required properties: - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the name "tsadc-apb". +- pinctrl-names : The pin control state names; +- pinctrl-0 : The "init" pinctrl state, it will be set before device probe. +- pinctrl-1 : The "default" pinctrl state, it will be set after reset the + TSADC controller. +- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend. - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. - rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. @@ -27,8 +32,10 @@ tsadc: tsadc@ff280000 { clock-names = "tsadc", "apb_pclk"; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - pinctrl-names = "default"; - pinctrl-0 = <&otp_out>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; rockchip,hw-tshut-mode = <0>; diff --git a/dts/Bindings/thermal/ti_soc_thermal.txt b/dts/Bindings/thermal/ti_soc_thermal.txt index 0c9222d27f..6299dd8de3 100644 --- a/dts/Bindings/thermal/ti_soc_thermal.txt +++ b/dts/Bindings/thermal/ti_soc_thermal.txt @@ -10,6 +10,8 @@ to the silicon temperature. Required properties: - compatible : Should be: + - "ti,omap34xx-bandgap" : for OMAP34xx bandgap + - "ti,omap36xx-bandgap" : for OMAP36xx bandgap - "ti,omap4430-bandgap" : for OMAP4430 bandgap - "ti,omap4460-bandgap" : for OMAP4460 bandgap - "ti,omap4470-bandgap" : for OMAP4470 bandgap @@ -25,6 +27,18 @@ to each bandgap version, because the mapping may change from soc to soc, apart of depending on available features. Example: +OMAP34xx: +bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap34xx-bandgap"; +}; + +OMAP36xx: +bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap36xx-bandgap"; +}; + OMAP4430: bandgap { reg = <0x4a002260 0x4 0x4a00232C 0x4>; -- cgit v1.2.3