From 87360e3dd42bb627a9f2611f961728c0789e1c21 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 8 Jul 2015 14:44:21 +0200 Subject: dts: update to v4.2-rc1 Signed-off-by: Sascha Hauer --- dts/Bindings/watchdog/st_lpc_wdt.txt | 38 ++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 dts/Bindings/watchdog/st_lpc_wdt.txt (limited to 'dts/Bindings/watchdog/st_lpc_wdt.txt') diff --git a/dts/Bindings/watchdog/st_lpc_wdt.txt b/dts/Bindings/watchdog/st_lpc_wdt.txt new file mode 100644 index 0000000000..388c88a012 --- /dev/null +++ b/dts/Bindings/watchdog/st_lpc_wdt.txt @@ -0,0 +1,38 @@ +STMicroelectronics Low Power Controller (LPC) - Watchdog +======================================================== + +LPC currently supports Watchdog OR Real Time Clock functionality. + +[See: ../rtc/rtc-st-lpc.txt for RTC options] + +Required properties + +- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc" + "st,stih415-lpc" "st,stid127-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of two modes ST_LPC_MODE_RTC [0] or + ST_LPC_MODE_WDT [1]. One (and only one) mode must be + selected. + +Required properties [watchdog mode] + +- st,syscfg : Phandle to syscfg node used to enable watchdog and configure + CPU reset type. +- timeout-sec : Watchdog timeout in seconds + +Optional properties [watchdog mode] + +- st,warm-reset : If present reset type will be 'warm' - if not it will be cold + +Example: + lpc@fde05000 { + compatible = "st,stih407-lpc"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,syscfg = <&syscfg_core>; + timeout-sec = <120>; + st,lpc-mode = ; + st,warm-reset; + }; -- cgit v1.2.3