From 25ed1e9b08404140c5323ff8431a0d117ff9c26e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 29 Feb 2016 08:10:35 +0100 Subject: dts: update to v4.5-rc3 Signed-off-by: Sascha Hauer --- dts/Bindings/net/brcm,bcmgenet.txt | 4 ++-- dts/Bindings/net/hisilicon-hns-dsaf.txt | 5 +---- dts/Bindings/net/hisilicon-hns-nic.txt | 7 ++++--- dts/Bindings/net/marvell-armada-370-neta.txt | 7 ++++++- dts/Bindings/net/mdio-mux-gpio.txt | 8 -------- dts/Bindings/net/mdio-mux.txt | 8 -------- dts/Bindings/net/phy.txt | 6 ++++-- 7 files changed, 17 insertions(+), 28 deletions(-) (limited to 'dts/Bindings') diff --git a/dts/Bindings/net/brcm,bcmgenet.txt b/dts/Bindings/net/brcm,bcmgenet.txt index 451fef26b4..10587bdadb 100644 --- a/dts/Bindings/net/brcm,bcmgenet.txt +++ b/dts/Bindings/net/brcm,bcmgenet.txt @@ -68,7 +68,7 @@ ethernet@f0b60000 { phy1: ethernet-phy@1 { max-speed = <1000>; reg = <0x1>; - compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-ieee802.3-c22"; }; }; }; @@ -115,7 +115,7 @@ ethernet@f0ba0000 { phy0: ethernet-phy@0 { max-speed = <1000>; reg = <0x0>; - compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-ieee802.3-c22"; }; }; }; diff --git a/dts/Bindings/net/hisilicon-hns-dsaf.txt b/dts/Bindings/net/hisilicon-hns-dsaf.txt index 80411b2f04..ecacfa44b1 100644 --- a/dts/Bindings/net/hisilicon-hns-dsaf.txt +++ b/dts/Bindings/net/hisilicon-hns-dsaf.txt @@ -4,8 +4,6 @@ Required properties: - compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2". "hisilicon,hns-dsaf-v1" is for hip05. "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612. -- dsa-name: dsa fabric name who provide this interface. - should be "dsafX", X is the dsaf id. - mode: dsa fabric mode string. only support one of dsaf modes like these: "2port-64vf", "6port-16rss", @@ -26,9 +24,8 @@ Required properties: Example: -dsa: dsa@c7000000 { +dsaf0: dsa@c7000000 { compatible = "hisilicon,hns-dsaf-v1"; - dsa_name = "dsaf0"; mode = "6port-16rss"; interrupt-parent = <&mbigen_dsa>; reg = <0x0 0xC0000000 0x0 0x420000 diff --git a/dts/Bindings/net/hisilicon-hns-nic.txt b/dts/Bindings/net/hisilicon-hns-nic.txt index 41d19be701..e6a9d1c308 100644 --- a/dts/Bindings/net/hisilicon-hns-nic.txt +++ b/dts/Bindings/net/hisilicon-hns-nic.txt @@ -4,8 +4,9 @@ Required properties: - compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2". "hisilicon,hns-nic-v1" is for hip05. "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612. -- ae-name: accelerator name who provides this interface, - is simply a name referring to the name of name in the accelerator node. +- ae-handle: accelerator engine handle for hns, + specifies a reference to the associating hardware driver node. + see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt - port-id: is the index of port provided by DSAF (the accelerator). DSAF can connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They are called debug ports. @@ -41,7 +42,7 @@ Example: ethernet@0{ compatible = "hisilicon,hns-nic-v1"; - ae-name = "dsaf0"; + ae-handle = <&dsaf0>; port-id = <0>; local-mac-address = [a2 14 e4 4b 56 76]; }; diff --git a/dts/Bindings/net/marvell-armada-370-neta.txt b/dts/Bindings/net/marvell-armada-370-neta.txt index aeea50c84e..d0cb869396 100644 --- a/dts/Bindings/net/marvell-armada-370-neta.txt +++ b/dts/Bindings/net/marvell-armada-370-neta.txt @@ -6,12 +6,17 @@ Required properties: - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. - phy-mode: See ethernet.txt file in the same directory -- clocks: a pointer to the reference clock for this device. +- clocks: List of clocks for this device. At least one clock is + mandatory for the core clock. If several clocks are given, then the + clock-names property must be used to identify them. Optional properties: - tx-csum-limit: maximum mtu supported by port that allow TX checksum. Value is presented in bytes. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for others. +- clock-names: List of names corresponding to clocks property; shall be + "core" for core clock and "bus" for the optional bus clock. + Example: diff --git a/dts/Bindings/net/mdio-mux-gpio.txt b/dts/Bindings/net/mdio-mux-gpio.txt index 79384113c2..694987d3c1 100644 --- a/dts/Bindings/net/mdio-mux-gpio.txt +++ b/dts/Bindings/net/mdio-mux-gpio.txt @@ -38,7 +38,6 @@ Example : phy11: ethernet-phy@1 { reg = <1>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -48,7 +47,6 @@ Example : }; phy12: ethernet-phy@2 { reg = <2>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -58,7 +56,6 @@ Example : }; phy13: ethernet-phy@3 { reg = <3>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -68,7 +65,6 @@ Example : }; phy14: ethernet-phy@4 { reg = <4>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -85,7 +81,6 @@ Example : phy21: ethernet-phy@1 { reg = <1>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -95,7 +90,6 @@ Example : }; phy22: ethernet-phy@2 { reg = <2>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -105,7 +99,6 @@ Example : }; phy23: ethernet-phy@3 { reg = <3>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -115,7 +108,6 @@ Example : }; phy24: ethernet-phy@4 { reg = <4>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, diff --git a/dts/Bindings/net/mdio-mux.txt b/dts/Bindings/net/mdio-mux.txt index f65606f8d6..491f5bd552 100644 --- a/dts/Bindings/net/mdio-mux.txt +++ b/dts/Bindings/net/mdio-mux.txt @@ -47,7 +47,6 @@ Example : phy11: ethernet-phy@1 { reg = <1>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -57,7 +56,6 @@ Example : }; phy12: ethernet-phy@2 { reg = <2>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -67,7 +65,6 @@ Example : }; phy13: ethernet-phy@3 { reg = <3>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -77,7 +74,6 @@ Example : }; phy14: ethernet-phy@4 { reg = <4>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -94,7 +90,6 @@ Example : phy21: ethernet-phy@1 { reg = <1>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -104,7 +99,6 @@ Example : }; phy22: ethernet-phy@2 { reg = <2>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -114,7 +108,6 @@ Example : }; phy23: ethernet-phy@3 { reg = <3>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, @@ -124,7 +117,6 @@ Example : }; phy24: ethernet-phy@4 { reg = <4>; - compatible = "marvell,88e1149r"; marvell,reg-init = <3 0x10 0 0x5777>, <3 0x11 0 0x00aa>, <3 0x12 0 0x4105>, diff --git a/dts/Bindings/net/phy.txt b/dts/Bindings/net/phy.txt index 525e1658f2..bc1c3c8bf8 100644 --- a/dts/Bindings/net/phy.txt +++ b/dts/Bindings/net/phy.txt @@ -17,8 +17,7 @@ Optional Properties: "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45 specifications. If neither of these are specified, the default is to - assume clause 22. The compatible list may also contain other - elements. + assume clause 22. If the phy's identifier is known then the list may contain an entry of the form: "ethernet-phy-idAAAA.BBBB" where @@ -28,6 +27,9 @@ Optional Properties: 4 hex digits. This is the chip vendor OUI bits 19:24, followed by 10 bits of a vendor specific ID. + The compatible list should not contain other values than those + listed here. + - max-speed: Maximum PHY supported speed (10, 100, 1000...) - broken-turn-around: If set, indicates the PHY device does not correctly -- cgit v1.2.3