From e2d1aab783e4d3a03525144446ccdc43d066b041 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 8 May 2018 08:15:03 +0200 Subject: dts: update to v4.17-rc3 Signed-off-by: Sascha Hauer --- dts/Bindings/serial/amlogic,meson-uart.txt | 2 +- dts/Bindings/serial/mvebu-uart.txt | 2 +- dts/Bindings/serial/renesas,sci-serial.txt | 2 ++ dts/Bindings/usb/usb-xhci.txt | 5 ++++- 4 files changed, 8 insertions(+), 3 deletions(-) (limited to 'dts/Bindings') diff --git a/dts/Bindings/serial/amlogic,meson-uart.txt b/dts/Bindings/serial/amlogic,meson-uart.txt index 8ff65fa632..c06c045126 100644 --- a/dts/Bindings/serial/amlogic,meson-uart.txt +++ b/dts/Bindings/serial/amlogic,meson-uart.txt @@ -21,7 +21,7 @@ Required properties: - interrupts : identifier to the device interrupt - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock names. -- clocks-names : +- clock-names : * "xtal" for external xtal clock identifier * "pclk" for the bus core clock, either the clk81 clock or the gate clock * "baud" for the source of the baudrate generator, can be either the xtal diff --git a/dts/Bindings/serial/mvebu-uart.txt b/dts/Bindings/serial/mvebu-uart.txt index 2ae2fee7e0..b7e0e32b9a 100644 --- a/dts/Bindings/serial/mvebu-uart.txt +++ b/dts/Bindings/serial/mvebu-uart.txt @@ -24,7 +24,7 @@ Required properties: - Must contain two elements for the extended variant of the IP (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx", respectively the UART TX interrupt and the UART RX interrupt. A - corresponding interrupts-names property must be defined. + corresponding interrupt-names property must be defined. - For backward compatibility reasons, a single element interrupts property is also supported for the standard variant of the IP, containing only the UART sum interrupt. This form is deprecated diff --git a/dts/Bindings/serial/renesas,sci-serial.txt b/dts/Bindings/serial/renesas,sci-serial.txt index ad962f4ec3..a006ea4d06 100644 --- a/dts/Bindings/serial/renesas,sci-serial.txt +++ b/dts/Bindings/serial/renesas,sci-serial.txt @@ -17,6 +17,8 @@ Required properties: - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART. - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART. - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART. + - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART. + - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART. - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART. - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART. - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART. diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt index c4c00dff4b..bd1dd316fb 100644 --- a/dts/Bindings/usb/usb-xhci.txt +++ b/dts/Bindings/usb/usb-xhci.txt @@ -28,7 +28,10 @@ Required properties: - interrupts: one XHCI interrupt should be described here. Optional properties: - - clocks: reference to a clock + - clocks: reference to the clocks + - clock-names: mandatory if there is a second clock, in this case + the name must be "core" for the first clock and "reg" for the + second one - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism -- cgit v1.2.3