From eddd8312948329e28f00a6f1ca52b3e7f3c330ee Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 24 Aug 2022 08:46:04 +0200 Subject: dts: update to v6.0-rc1 Signed-off-by: Sascha Hauer --- dts/src/arm/imx6q-apalis-eval.dts | 127 ++++---------------------------------- 1 file changed, 12 insertions(+), 115 deletions(-) (limited to 'dts/src/arm/imx6q-apalis-eval.dts') diff --git a/dts/src/arm/imx6q-apalis-eval.dts b/dts/src/arm/imx6q-apalis-eval.dts index a0683b4aec..fa160a3898 100644 --- a/dts/src/arm/imx6q-apalis-eval.dts +++ b/dts/src/arm/imx6q-apalis-eval.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -30,89 +30,26 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - power-supply = <®_3v3_sw>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - reg_pcie_switch: regulator-pcie-switch { compatible = "regulator-fixed"; - regulator-name = "pcie_switch"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + enable-active-high; gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "pcie_switch"; startup-delay-us = <100000>; - enable-active-high; status = "okay"; }; reg_3v3_sw: regulator-3v3-sw { compatible = "regulator-fixed"; - regulator-name = "3.3V_SW"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; regulator-always-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "3.3V_SW"; }; }; -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - power-supply = <®_3v3_sw>; - status = "okay"; -}; - &can1 { xceiver-supply = <®_3v3_sw>; status = "okay"; @@ -123,27 +60,10 @@ status = "okay"; }; -&hdmi { - status = "okay"; -}; - /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM, PWM, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - pcie-switch@58 { compatible = "plx,pex8605"; reg = <0x58>; @@ -164,14 +84,6 @@ status = "okay"; }; -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_moci>; @@ -198,11 +110,11 @@ status = "okay"; }; -®_usb_otg_vbus { +®_usb_host_vbus { status = "okay"; }; -®_usb_host_vbus { +®_usb_otg_vbus { status = "okay"; }; @@ -246,28 +158,13 @@ /* MMC1 */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>; - cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>; status = "okay"; }; /* SD1 */ &usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; - -&iomuxc { - /* - * Mux the Apalis GPIOs - */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; -}; -- cgit v1.2.3