From 2e9cce8fb1f577088e2b20ae2f461130e13ad190 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 28 Nov 2017 11:02:14 +0100
Subject: dts: update to v4.15-rc1

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 dts/src/arm/sun4i-a10-dserve-dsrv9703c.dts | 50 +++++-------------------------
 1 file changed, 7 insertions(+), 43 deletions(-)

(limited to 'dts/src/arm/sun4i-a10-dserve-dsrv9703c.dts')

diff --git a/dts/src/arm/sun4i-a10-dserve-dsrv9703c.dts b/dts/src/arm/sun4i-a10-dserve-dsrv9703c.dts
index e0777ae808..147cbc5e08 100644
--- a/dts/src/arm/sun4i-a10-dserve-dsrv9703c.dts
+++ b/dts/src/arm/sun4i-a10-dserve-dsrv9703c.dts
@@ -58,8 +58,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin_dsrv9703c>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
@@ -77,10 +75,8 @@
 		max-microvolt = <3000000>;
 	};
 
-	reg_motor: reg_motor {
+	reg_motor: reg-motor {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&motor_pins>;
 		regulator-name = "vcc-motor";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
@@ -90,8 +86,6 @@
 };
 
 &codec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&codec_pa_pin>;
 	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
 	status = "okay";
 };
@@ -105,8 +99,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -118,15 +110,11 @@
 #include "axp209.dtsi"
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	/* pull-ups and devices require AXP209 LDO3 */
 	status = "failed";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -134,8 +122,6 @@
 		reg = <0x38>;
 		interrupt-parent = <&pio>;
 		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_pins>;
 		reset-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <768>;
@@ -146,14 +132,14 @@
 	vref-supply = <&reg_ldo2>;
 	status = "okay";
 
-	button@400 {
+	button-400 {
 		label = "Volume Down";
 		linux,code = <KEY_VOLUMEDOWN>;
 		channel = <0>;
 		voltage = <400000>;
 	};
 
-	button@800 {
+	button-800 {
 		label = "Volume Up";
 		linux,code = <KEY_VOLUMEUP>;
 		channel = <0>;
@@ -162,8 +148,6 @@
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -176,33 +160,13 @@
 };
 
 &pio {
-	bl_en_pin_dsrv9703c: bl_en_pin@0 {
-		pins = "PH7";
-		function = "gpio_out";
-	};
-
-	codec_pa_pin: codec_pa_pin@0 {
-		pins = "PH15";
-		function = "gpio_out";
-	};
-
-	motor_pins: motor_pins@0 {
-		pins = "PB3";
-		function = "gpio_out";
-	};
-
-	touchscreen_pins: touchscreen_pins@0 {
-		pins = "PB13";
-		function = "gpio_out";
-	};
-
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;
@@ -211,7 +175,7 @@
 
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -250,7 +214,7 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
-- 
cgit v1.2.3