From 00ce25c6dcdae5582ae4be37147ab33678adc995 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 25 Apr 2014 11:22:32 +0200 Subject: Add devicetree source files as of Linux-3.15-rc2 This adds the Linux dts files to barebox. The dts files are generated from Ian Campbells device-tree-rebasing.git: git://xenbits.xen.org/people/ianc/device-tree-rebasing.git The dts are found in dts/ in the barebox repository and will be updated from upstream regularly, probably for each upstream -rc. To keep the synchronization with upstream easy no changes to the original files are allowed under dts/. Instead changes to upstream dts files will be done using overlays in arch/$ARCH/dts/. Signed-off-by: Sascha Hauer --- dts/src/arm/tegra30-cardhu.dtsi | 611 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 611 insertions(+) create mode 100644 dts/src/arm/tegra30-cardhu.dtsi (limited to 'dts/src/arm/tegra30-cardhu.dtsi') diff --git a/dts/src/arm/tegra30-cardhu.dtsi b/dts/src/arm/tegra30-cardhu.dtsi new file mode 100644 index 0000000000..0cf0848a82 --- /dev/null +++ b/dts/src/arm/tegra30-cardhu.dtsi @@ -0,0 +1,611 @@ +#include "tegra30.dtsi" + +/** + * This file contains common DT entry for all fab version of Cardhu. + * There is multiple fab version of Cardhu starting from A01 to A07. + * Cardhu fab version A01 and A03 are not supported. Cardhu fab version + * A02 will have different sets of GPIOs for fixed regulator compare to + * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are + * compatible with fab version A04. Based on Cardhu fab version, the + * related dts file need to be chosen like for Cardhu fab version A02, + * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use + * tegra30-cardhu-a04.dts. + * The identification of board is done in two ways, by looking the sticker + * on PCB and by reading board id eeprom. + * The stciker will have number like 600-81291-1000-002 C.3. In this 4th + * number is the fab version like here it is 002 and hence fab version A02. + * The (downstream internal) U-Boot of Cardhu display the board-id as + * follows: + * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00 + * In this Fab version is 02 i.e. A02. + * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56). + * The location 0x8 of this eeprom contains the Fab version. It is 1 byte + * wide. + */ + +/ { + model = "NVIDIA Tegra30 Cardhu evaluation board"; + compatible = "nvidia,cardhu", "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000d000/tps65911@2d"; + rtc1 = "/rtc@7000e000"; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + pcie-controller@00003000 { + status = "okay"; + pex-clk-supply = <&pex_hvdd_3v3_reg>; + vdd-supply = <&ldo1_reg>; + avdd-supply = <&ldo2_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + nvidia,panel = <&panel>; + }; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6", + "uart3_cts_n_pa1", + "uart3_rts_n_pc0", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + }; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + panelddc: i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + /* ALS and Proximity sensor */ + isl29028@44 { + compatible = "isil,isl29028"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = ; + }; + + i2cmux@70 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + }; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = ; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_ac_bat_reg>; + vcc2-supply = <&vdd_ac_bat_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&vdd_5v0_reg>; + vcc5-supply = <&vdd_ac_bat_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_ac_bat_reg>; + vccio-supply = <&vdd_ac_bat_reg>; + + regulators { + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: vdd2 { + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7_reg: ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&sys_3v3_reg>; + interrupt-parent = <&gpio>; + interrupts = ; + }; + + tps62361@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@1 { + compatible = "winbond,w25q32"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + + pmc@7000e400 { + status = "okay"; + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + ahub@70080000 { + i2s@70080400 { + status = "okay"; + }; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + vbus-supply = <&usb3_vbus_reg>; + status = "okay"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_bl_reg>; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + panel: panel { + compatible = "chunghwa,claa101wb01", "simple-panel"; + ddc-i2c-bus = <&panelddc>; + + power-supply = <&vdd_pnl1_reg>; + enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + cam_1v8_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "cam_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; + + cp_5v_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "cp_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; + + emmc_3v3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "emmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + modem_3v3_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "modem_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; + }; + + pex_hvdd_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "pex_hvdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam1_ldo_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd_cam1_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam2_ldo_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "vdd_cam2_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam3_ldo_reg: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "vdd_cam3_ldo"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_com_reg: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "vdd_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_fuse_3v3_reg: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_pnl1_reg: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "vdd_pnl1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + vdd_vid_reg: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-cardhu", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Cardhu"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) + GPIO_ACTIVE_HIGH>; + + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; +}; -- cgit v1.2.3