From 81ce4a7dec8ba066c73692e10634091b14c1e494 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 14 Feb 2020 09:05:53 +0100 Subject: dts: update to v5.6-rc1 Signed-off-by: Sascha Hauer --- dts/src/arm64/amlogic/meson-a1.dtsi | 25 ++ dts/src/arm64/amlogic/meson-axg.dtsi | 6 + dts/src/arm64/amlogic/meson-g12-common.dtsi | 23 ++ dts/src/arm64/amlogic/meson-g12.dtsi | 6 + dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi | 375 +++++++++++++++++++++ dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts | 78 +++++ .../arm64/amlogic/meson-gxl-s905d-libretech-pc.dts | 16 + dts/src/arm64/amlogic/meson-gxl.dtsi | 9 + .../arm64/amlogic/meson-gxm-s912-libretech-pc.dts | 62 ++++ dts/src/arm64/amlogic/meson-sm1.dtsi | 12 + 10 files changed, 612 insertions(+) create mode 100644 dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi create mode 100644 dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts create mode 100644 dts/src/arm64/amlogic/meson-gxl-s905d-libretech-pc.dts create mode 100644 dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts (limited to 'dts/src/arm64/amlogic') diff --git a/dts/src/arm64/amlogic/meson-a1.dtsi b/dts/src/arm64/amlogic/meson-a1.dtsi index 7210ad049d..4dec518c4d 100644 --- a/dts/src/arm64/amlogic/meson-a1.dtsi +++ b/dts/src/arm64/amlogic/meson-a1.dtsi @@ -5,6 +5,7 @@ #include #include +#include / { compatible = "amlogic,a1"; @@ -74,6 +75,30 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; + + reset: reset-controller@0 { + compatible = "amlogic,meson-a1-reset"; + reg = <0x0 0x0 0x0 0x8c>; + #reset-cells = <1>; + }; + + periphs_pinctrl: pinctrl@0400 { + compatible = "amlogic,meson-a1-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@0400 { + reg = <0x0 0x0400 0x0 0x003c>, + <0x0 0x0480 0x0 0x0118>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 62>; + }; + + }; + uart_AO: serial@1c00 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index 04803c3bcc..aace3d32a3 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -1169,6 +1169,7 @@ interrupts = ; clocks = <&clkc_audio AUD_CLKID_TODDR_A>; resets = <&arb AXG_ARB_TODDR_A>; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -1180,6 +1181,7 @@ interrupts = ; clocks = <&clkc_audio AUD_CLKID_TODDR_B>; resets = <&arb AXG_ARB_TODDR_B>; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -1191,6 +1193,7 @@ interrupts = ; clocks = <&clkc_audio AUD_CLKID_TODDR_C>; resets = <&arb AXG_ARB_TODDR_C>; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -1202,6 +1205,7 @@ interrupts = ; clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; resets = <&arb AXG_ARB_FRDDR_A>; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -1213,6 +1217,7 @@ interrupts = ; clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; resets = <&arb AXG_ARB_FRDDR_B>; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -1224,6 +1229,7 @@ interrupts = ; clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; resets = <&arb AXG_ARB_FRDDR_C>; + amlogic,fifo-depth = <256>; status = "disabled"; }; diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi index 7fabc8d965..abe04f4ad7 100644 --- a/dts/src/arm64/amlogic/meson-g12-common.dtsi +++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi @@ -1968,6 +1968,29 @@ }; }; + vdec: video-decoder@ff620000 { + compatible = "amlogic,g12a-vdec"; + reg = <0x0 0xff620000 0x0 0x10000>, + <0x0 0xffd0e180 0x0 0xe4>; + reg-names = "dos", "esparser"; + interrupts = , + ; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&rti>; + amlogic,canvas = <&canvas>; + + clocks = <&clkc CLKID_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>, + <&clkc CLKID_VDEC_HEVCF>; + clock-names = "dos_parser", "dos", "vdec_1", + "vdec_hevc", "vdec_hevcf"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; + }; + vpu: vpu@ff900000 { compatible = "amlogic,meson-g12a-vpu"; reg = <0x0 0xff900000 0x0 0x100000>, diff --git a/dts/src/arm64/amlogic/meson-g12.dtsi b/dts/src/arm64/amlogic/meson-g12.dtsi index b3ba2fda8a..03054c4788 100644 --- a/dts/src/arm64/amlogic/meson-g12.dtsi +++ b/dts/src/arm64/amlogic/meson-g12.dtsi @@ -106,6 +106,7 @@ resets = <&arb AXG_ARB_TODDR_A>, <&clkc_audio AUD_RESET_TODDR_A>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -120,6 +121,7 @@ resets = <&arb AXG_ARB_TODDR_B>, <&clkc_audio AUD_RESET_TODDR_B>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -134,6 +136,7 @@ resets = <&arb AXG_ARB_TODDR_C>, <&clkc_audio AUD_RESET_TODDR_C>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -148,6 +151,7 @@ resets = <&arb AXG_ARB_FRDDR_A>, <&clkc_audio AUD_RESET_FRDDR_A>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -162,6 +166,7 @@ resets = <&arb AXG_ARB_FRDDR_B>, <&clkc_audio AUD_RESET_FRDDR_B>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -176,6 +181,7 @@ resets = <&arb AXG_ARB_FRDDR_C>, <&clkc_audio AUD_RESET_FRDDR_C>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; diff --git a/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi new file mode 100644 index 0000000000..248b018c83 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gx-libretech-pc.dtsi @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. + * Author: Jerome Brunet + */ + +/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */ + +#include +#include + +/ { + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + update-button { + label = "update"; + linux,code = ; + press-threshold-microvolt = <1300000>; + }; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + green { + color = ; + function = LED_FUNCTION_DISK_ACTIVITY; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + blue { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + }; + + vcc_card: regulator-vcc_card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddio_ao3v3>; + + gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc5v: regulator-vcc5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ao_5v>; + + gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddio_ao3v3: regulator-vddio_ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddio_ao3v3>; + regulator-always-on; + }; + + vddio_card: regulator-vddio-card { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + }; +}; + +&cec_AO { + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; + status = "okay"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_phy_irq_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + reg = <0>; + max-speed = <1000>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl_periphs { + /* + * Make sure the reset pin of the usb HUB is driven high to take + * it out of reset. + */ + usb1_rst_pins: usb1_rst_irq { + mux { + groups = "GPIODV_3"; + function = "gpio_periphs"; + bias-disable; + output-high; + }; + }; + + /* Make sure the phy irq pin is properly configured as input */ + eth_phy_irq_pins: eth_phy_irq { + mux { + groups = "GPIOZ_15"; + function = "gpio_periphs"; + bias-disable; + output-disable; + }; + }; +}; + +&hdmi_tx { + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc5v>; + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c_C { + pinctrl-0 = <&i2c_c_dv18_pins>; + pinctrl-names = "default"; + status = "okay"; + + rtc: rtc@51 { + reg = <0x51>; + compatible = "nxp,pcf8563"; + #clock-cells = <0>; + clock-output-names = "rtc_clkout"; + }; +}; + +&pwm_AO_ab { + pinctrl-0 = <&pwm_ao_a_3_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_b_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&saradc { + vref-supply = <&vddio_ao18>; + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_card>; + + status = "okay"; +}; + +/* eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddio_ao3v3>; + vqmmc-supply = <&vddio_boot>; + + status = "okay"; +}; + +&spifc { + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + status = "okay"; + + gd25lq128: spi-flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <12000000>; + }; +}; + +&uart_AO { + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb1_rst_pins>; + pinctrl-names = "default"; + phy-supply = <&vcc5v>; +}; + +&usb2_phy1 { + phy-supply = <&vcc5v>; +}; diff --git a/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts b/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts new file mode 100644 index 0000000000..2f1f829450 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxbb-kii-pro.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Mohammad Rasim + */ + +/dts-v1/; + +#include "meson-gxbb-p20x.dtsi" + +#include +#include +#include +/ { + compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb"; + model = "Videostrong KII Pro"; + + leds { + compatible = "gpio-leds"; + status { + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + default-state = "off"; + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + + + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4335a0"; + }; +}; + + + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101GR (0x02430c54) */ + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-libretech-pc.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-libretech-pc.dts new file mode 100644 index 0000000000..100a1cfeea --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-libretech-pc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Author: Jerome Brunet + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-libretech-pc.dtsi" + +/ { + compatible = "libretech,aml-s905d-pc", "amlogic,s905d", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905D-PC"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi index ed33d8efaf..259d863993 100644 --- a/dts/src/arm64/amlogic/meson-gxl.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl.dtsi @@ -533,6 +533,15 @@ }; }; + i2c_c_dv18_pins: i2c_c_dv18 { + mux { + groups = "i2c_sck_c_dv19", + "i2c_sda_c_dv18"; + function = "i2c_c"; + bias-disable; + }; + }; + eth_pins: eth_c { mux { groups = "eth_mdio", diff --git a/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts b/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts new file mode 100644 index 0000000000..444c249863 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm-s912-libretech-pc.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Author: Jerome Brunet + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-libretech-pc.dtsi" + +/ { + compatible = "libretech,aml-s912-pc", "amlogic,s912", + "amlogic,meson-gxm"; + model = "Libre Computer AML-S912-PC"; + + typec2_vbus: regulator-typec2_vbus { + compatible = "regulator-fixed"; + regulator-name = "TYPEC2_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v>; + + gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&pinctrl_periphs { + /* + * Make sure the irq pin of the TYPE C controller is not driven + * by the SoC. + */ + fusb302_irq_pins: fusb302_irq { + mux { + groups = "GPIODV_0"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + +&i2c_C { + fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + pinctrl-0 = <&fusb302_irq_pins>; + pinctrl-names = "default"; + interrupt-parent = <&gpio_intc>; + interrupts = <59 IRQ_TYPE_LEVEL_LOW>; + + vbus-supply = <&typec2_vbus>; + + status = "okay"; + }; +}; + +&usb2_phy2 { + phy-supply = <&typec2_vbus>; +}; diff --git a/dts/src/arm64/amlogic/meson-sm1.dtsi b/dts/src/arm64/amlogic/meson-sm1.dtsi index 7894a5458d..d847a3fcbc 100644 --- a/dts/src/arm64/amlogic/meson-sm1.dtsi +++ b/dts/src/arm64/amlogic/meson-sm1.dtsi @@ -201,6 +201,7 @@ resets = <&arb AXG_ARB_TODDR_A>, <&clkc_audio AUD_RESET_TODDR_A>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <8192>; status = "disabled"; }; @@ -215,6 +216,7 @@ resets = <&arb AXG_ARB_TODDR_B>, <&clkc_audio AUD_RESET_TODDR_B>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -229,6 +231,7 @@ resets = <&arb AXG_ARB_TODDR_C>, <&clkc_audio AUD_RESET_TODDR_C>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -243,6 +246,7 @@ resets = <&arb AXG_ARB_FRDDR_A>, <&clkc_audio AUD_RESET_FRDDR_A>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; status = "disabled"; }; @@ -257,6 +261,7 @@ resets = <&arb AXG_ARB_FRDDR_B>, <&clkc_audio AUD_RESET_FRDDR_B>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -271,6 +276,7 @@ resets = <&arb AXG_ARB_FRDDR_C>, <&clkc_audio AUD_RESET_FRDDR_C>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -412,6 +418,7 @@ resets = <&arb AXG_ARB_TODDR_D>, <&clkc_audio AUD_RESET_TODDR_D>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; @@ -426,6 +433,7 @@ resets = <&arb AXG_ARB_FRDDR_D>, <&clkc_audio AUD_RESET_FRDDR_D>; reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; status = "disabled"; }; }; @@ -482,6 +490,10 @@ power-domains = <&pwrc PWRC_SM1_VPU_ID>; }; +&vdec { + compatible = "amlogic,sm1-vdec"; +}; + &vpu { power-domains = <&pwrc PWRC_SM1_VPU_ID>; }; -- cgit v1.2.3