From 6ea3de1b8ce7a0154233bd75e77e6e44a525d0ef Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 5 Jan 2021 12:56:25 +0100 Subject: dts: update to v5.11-rc1 Signed-off-by: Sascha Hauer --- dts/src/arm64/ti/k3-j7200-common-proc-board.dts | 33 ++++++++++++++----------- 1 file changed, 19 insertions(+), 14 deletions(-) (limited to 'dts/src/arm64/ti/k3-j7200-common-proc-board.dts') diff --git a/dts/src/arm64/ti/k3-j7200-common-proc-board.dts b/dts/src/arm64/ti/k3-j7200-common-proc-board.dts index ef03e7636b..331b388e1d 100644 --- a/dts/src/arm64/ti/k3-j7200-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j7200-common-proc-board.dts @@ -43,13 +43,6 @@ }; &main_pmx0 { - main_i2c0_pins_default: main-i2c0-pins-default { - pinctrl-single,pins = < - J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */ - J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */ - >; - }; - main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < J721E_IOPAD(0xdc, PIN_INPUT_PULLUP, 3) /* (U3) ECAP0_IN_APWM_OUT.I2C1_SCL */ @@ -79,7 +72,7 @@ &wkup_uart0 { /* Wakeup UART is used by System firmware */ - status = "disabled"; + status = "reserved"; }; &main_uart0 { @@ -89,7 +82,7 @@ &main_uart2 { /* MAIN UART 2 is used by R5F firmware */ - status = "disabled"; + status = "reserved"; }; &main_uart3 { @@ -146,10 +139,6 @@ }; &main_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; - exp1: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; @@ -165,16 +154,26 @@ }; }; +/* + * The j7200 CPB board is identical to the CPB used for J721E, the SOMs can be + * swapped on the CPB. + * + * main_i2c1 of J7200 is connected to the CPB i2c bus labeled as i2c3. + * The i2c1 of the CPB (as it is labeled) is not connected to j7200. + */ &main_i2c1 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; - exp4: gpio@20 { + exp3: gpio@20 { compatible = "ti,tca6408"; reg = <0x20>; gpio-controller; #gpio-cells = <2>; + gpio-line-names = "CODEC_RSTz", "CODEC_SPARE1", "UB926_RESETn", + "UB926_LOCK", "UB926_PWR_SW_CNTRL", + "UB926_TUNER_RESET", "UB926_GPIO_SPARE", ""; }; }; @@ -213,3 +212,9 @@ dr_mode = "otg"; maximum-speed = "high-speed"; }; + +&tscadc0 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; -- cgit v1.2.3