From db2a8bd5276816ef72351e238fe8e686d2af6234 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 8 Oct 2018 12:26:15 +0200
Subject: dts: update to v4.19-rc7

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 dts/src/arm/at91-sama5d2_ptc_ek.dts |  2 ++
 dts/src/arm/bcm63138.dtsi           | 14 ++++++++------
 dts/src/arm/stm32mp157c.dtsi        |  4 ++--
 dts/src/arm/sun8i-r40.dtsi          |  3 +--
 4 files changed, 13 insertions(+), 10 deletions(-)

(limited to 'dts')

diff --git a/dts/src/arm/at91-sama5d2_ptc_ek.dts b/dts/src/arm/at91-sama5d2_ptc_ek.dts
index b10dccd095..3b1baa8605 100644
--- a/dts/src/arm/at91-sama5d2_ptc_ek.dts
+++ b/dts/src/arm/at91-sama5d2_ptc_ek.dts
@@ -11,6 +11,7 @@
 #include "sama5d2-pinfunc.h"
 #include <dt-bindings/mfd/atmel-flexcom.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/at91.h>
 
 / {
 	model = "Atmel SAMA5D2 PTC EK";
@@ -299,6 +300,7 @@
 							 <PIN_PA30__NWE_NANDWE>,
 							 <PIN_PB2__NRD_NANDOE>;
 						bias-pull-up;
+						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
 					};
 
 					ale_cle_rdy_cs {
diff --git a/dts/src/arm/bcm63138.dtsi b/dts/src/arm/bcm63138.dtsi
index 43ee992ccd..6df6151877 100644
--- a/dts/src/arm/bcm63138.dtsi
+++ b/dts/src/arm/bcm63138.dtsi
@@ -106,21 +106,23 @@
 		global_timer: timer@1e200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&axi_clk>;
 		};
 
 		local_timer: local-timer@1e600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&axi_clk>;
 		};
 
 		twd_watchdog: watchdog@1e620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		armpll: armpll {
@@ -158,7 +160,7 @@
 		serial0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 			clock-names = "periph";
 			status = "disabled";
@@ -167,7 +169,7 @@
 		serial1: serial@620 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 			clock-names = "periph";
 			status = "disabled";
@@ -180,7 +182,7 @@
 			reg = <0x2000 0x600>, <0xf0 0x10>;
 			reg-names = "nand", "nand-int-base";
 			status = "disabled";
-			interrupts = <GIC_SPI 38 0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand";
 		};
 
diff --git a/dts/src/arm/stm32mp157c.dtsi b/dts/src/arm/stm32mp157c.dtsi
index 661be948ab..185541a5b6 100644
--- a/dts/src/arm/stm32mp157c.dtsi
+++ b/dts/src/arm/stm32mp157c.dtsi
@@ -1078,8 +1078,8 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc SPI6_K>;
 			resets = <&rcc SPI6_R>;
-			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>,
-			       <&mdma1 35 0x0 0x40002 0x0 0x0 0>;
+			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0>,
+			       <&mdma1 35 0x0 0x40002 0x0 0x0>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi
index ffd9f00f74..5f547c161b 100644
--- a/dts/src/arm/sun8i-r40.dtsi
+++ b/dts/src/arm/sun8i-r40.dtsi
@@ -800,8 +800,7 @@
 		};
 
 		hdmi_phy: hdmi-phy@1ef0000 {
-			compatible = "allwinner,sun8i-r40-hdmi-phy",
-				     "allwinner,sun50i-a64-hdmi-phy";
+			compatible = "allwinner,sun8i-r40-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
 				 <&ccu 7>, <&ccu 16>;
-- 
cgit v1.2.3