TI Davinci ========== virt2real --------- virt2real is a miniature board for creation of WiFi or Internet controllable smart devices. The board has * TI DaVinchi DM365 running at 300 MHz; * 128 MiB DDR2 SDRAM; * 256 MiB NAND Flash Memory; * 2 x UART serial interfaces; * 1 x Ethernet interface (Micrel KS8851); * 1 x USB interface; * microSD card slot. The board uses U-Boot as bootloader. Running barebox ^^^^^^^^^^^^^^^ 1. Connect to the boards's UART0 (115200 8N1); Use J2.2 (GND), J2.4 (UART0_TXD), J2.6 (UART0_RXD) pins. 2. Turn board's power on; 3. Wait for ``Hit any key to stop autoboot`` prompt and press the space key. 4. Upload ``barebox.bin`` via Ymodem .. code-block:: none virt2real ># loady .. 5. Run barebox .. code-block:: none virt2real ># go 0x82000000 .. Links ^^^^^ * http://virt2real.com/ * http://wiki.virt2real.ru/ * https://github.com/virt2real