/*
 * Copyright (C) 2009-2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 *
 * Under GPLv2
 */

#include <common.h>
#include <init.h>
#include <mach/hardware.h>
#include <mach/at91_rstc.h>
#include <mach/at91_wdt.h>
#include <mach/at91_pmc.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91sam9_sdramc.h>
#include <mach/at91sam9_matrix.h>
#include <mach/at91_lowlevel_init.h>

#define MASTER_PLL_DIV		15
#define MASTER_PLL_MUL		162
#define MAIN_PLL_DIV		2

void __bare_init at91sam926x_lowlevel_board_config(struct at91sam926x_lowlevel_cfg *cfg)
{
	/* Disable Watchdog */
	cfg->wdt_mr =
		AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT |
		AT91_WDT_WDV |
		AT91_WDT_WDDIS |
		AT91_WDT_WDD;

	/* define PDC[31:16] as DATA[31:16] */
	cfg->ebi_pio_pdr = 0xFFFF0000;
	/* no pull-up for D[31:16] */
	cfg->ebi_pio_ppudr = 0xFFFF0000;
	/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
	cfg->ebi_csa =
		AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC;

	cfg->smc_cs = 0;
	cfg->smc_mode =
		AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
		AT91_SMC_DBW_16 |
		AT91_SMC_TDFMODE |
		AT91_SMC_TDF_(6);
	cfg->smc_cycle =
		AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22);
	cfg->smc_pulse =
		AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) |
		AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11);
	cfg->smc_setup =
		AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) |
		AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10);

	cfg->pmc_mor =
		AT91_PMC_MOSCEN |
		(255 << 8);		/* Main Oscillator Start-up Time */
	cfg->pmc_pllar =
		AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */
		AT91_PMC_OUT |
		((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV);
	/* PCK/2 = MCK Master Clock from PLLA */
	cfg->pmc_mckr1 =
		AT91_PMC_CSS_SLOW |
		AT91_PMC_PRES_1 |
		AT91SAM9_PMC_MDIV_2 |
		AT91_PMC_PDIV_1;
	/* PCK/2 = MCK Master Clock from PLLA */
	cfg->pmc_mckr2 =
		AT91_PMC_CSS_PLLA |
		AT91_PMC_PRES_1 |
		AT91SAM9_PMC_MDIV_2 |
		AT91_PMC_PDIV_1;

	/* SDRAM */
	/* SDRAMC_TR - Refresh Timer register */
	cfg->sdrc_tr1 = 0x13C;
	/* SDRAMC_CR - Configuration register*/
	cfg->sdrc_cr =
		AT91_SDRAMC_NC_9 |
		AT91_SDRAMC_NR_13 |
		AT91_SDRAMC_NB_4 |
		AT91_SDRAMC_CAS_3 |
		AT91_SDRAMC_DBW_32 |
		(1 <<  8) |		/* Write Recovery Delay */
		(7 << 12) |		/* Row Cycle Delay */
		(3 << 16) |		/* Row Precharge Delay */
		(2 << 20) |		/* Row to Column Delay */
		(5 << 24) |		/* Active to Precharge Delay */
		(1 << 28);		/* Exit Self Refresh to Active Delay */

	/* Memory Device Register -> SDRAM */
	cfg->sdrc_mdr = AT91_SDRAMC_MD_SDRAM;
	/* SDRAM_TR */
	cfg->sdrc_tr2 = 1200;

	/* user reset enable */
	cfg->rstc_rmr =
		AT91_RSTC_KEY |
		AT91_RSTC_PROCRST |
		AT91_RSTC_RSTTYP_WAKEUP |
		AT91_RSTC_RSTTYP_WATCHDOG;
}