#include <arm/at91sam9263ek.dts>
/ {
	chosen {
		environment {
			compatible = "barebox,environment";
			device-path = &nand_controller, "partname:bareboxenv";
		};
	};

	ahb {
		apb {
			mmc1: mmc@fff84000 {
				pinctrl-0 = <
					&pinctrl_board_mmc1
					&pinctrl_mmc1_clk
					&pinctrl_mmc1_slot0_cmd_dat0
					&pinctrl_mmc1_slot0_dat1_3>;
					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
					status = "okay";
					slot@0 {
						reg = <0>;
						bus-width = <4>;
						cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
						wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
					};
			};
		};
	};


	pinctrl@fffff200 {
		pinctrl_board_mmc1: mmc1-board {
			atmel,pins =
				<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* PE18 gpio CD pin pull up and deglitch */
				 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;		/* PE19 gpio WP pin pull up */
		};
	};
};

&pioB {
	/* Enable the 50MHz oscillator for Ethernet PHY */
	phy_50mhz {
		gpio-hog;
		gpios = <27 GPIO_ACTIVE_LOW>;
		output-high;
		line-name = "PHY 50 MHz oscillator";
	};
};