/*
 * Copyright 2012 Pengutronix
 * Copyright 2011 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

/dts-v1/;
#include "imx53.dtsi"
#include <arm/nxp/imx/imx53.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>

/ {
	model = "Garz & Fricke VINCELL LT";
	compatible = "guf,imx53-vincell-lt", "fsl,imx53";

	chosen {
		stdout-path = &uart2;

		environment {
			compatible = "barebox,environment";
			device-path = &bareboxenv;
		};
	};

	panel: panel {
		compatible = "giantplus,gpg482739qs5", "simple-panel";
		power-supply = <&reg_panel>;
		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
		backlight = <&backlight>;

		port {
			panel_in: endpoint {
				remote-endpoint = <&disp0_out>;
			};
		};
	};

	display@di0 {
		compatible = "fsl,imx-parallel-display";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_disp0>;
		crtcs = <&ipu 0>;
		interface-pix-fmt = "bgr24";
		status = "okay";
		fsl,panel = <&panel>;

		port@0 {
			disp0_in: endpoint {
				remote-endpoint = <&ipu_di0_disp0>;
			};
		};

		port@1 {
			disp0_out: endpoint {
				remote-endpoint = <&panel_in>;
			};
		};
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm1 0 50000 0>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <6>;
		power-supply = <&ldo3>;
		enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
		backlight-boot-off;
	};

	regulators {
		compatible = "simple-bus";

		reg_3p2v: 3p2v {
			compatible = "regulator-fixed";
			regulator-name = "3P2V";
			regulator-min-microvolt = <3200000>;
			regulator-max-microvolt = <3200000>;
			regulator-always-on;
		};

		reg_panel: vdd-panel {
			compatible = "regulator-fixed";
			regulator-name = "VDD_PANEL";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio4 20 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		reg_usbotg: vbus-otg {
			compatible = "regulator-fixed";
			regulator-name = "VBUS_OTG";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
		};

		reg_usbh1: vbus-h1 {
			compatible = "regulator-fixed";
			regulator-name = "VBUS_H1";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
		};
	};
};

&{/clocks/ckih1} {
	clock-frequency = <0>;
};

&audmux {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_audmux>;
	status = "okay";
};

&esdhc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_esdhc1>;
	cd-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	phy-mode = "rmii";
	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	bitrate = <100000>;
	status = "okay";

	sgtl5000: codec@a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
	};

	pmic: dialog@48 { /* DA9053-3HHA1 PMIC */
		compatible = "dlg,da9053-aa", "dlg,da9052";
		reg = <0x48>;
		interrupt-parent = <&gpio7>;
		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;

		regulators {
			buck1 { /* CORE */
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <2075000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck2 { /* PRO */
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <2075000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck3 { /* MEM */
				regulator-min-microvolt = <925000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
			};

			buck4 { /* PERI */
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <2500000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo1 {
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <1300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo2 {
				regulator-min-microvolt = <600000>;
				regulator-max-microvolt = <1300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo3: ldo3 {
				regulator-min-microvolt = <1725000>;
				regulator-max-microvolt = <3300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo4 {
				regulator-min-microvolt = <1725000>;
				regulator-max-microvolt = <2775000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo5 {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo6 {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1300000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo7 {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <2750000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo8 {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1800000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo9 {
				regulator-min-microvolt = <1250000>;
				regulator-max-microvolt = <1500000>;
				regulator-always-on;
				regulator-boot-on;
			};

			ldo10 {
				regulator-min-microvolt = <1200000>;
				regulator-max-microvolt = <1300000>;
				regulator-always-on;
				regulator-boot-on;
			};
		};
	};

	temperature-sensor@49 {
		compatible = "ti,lm73";
		reg = <0x49>;
	};

	eeprom@50 {
		compatible = "atmel,24c32", "st,m24c32";
		reg = <0x50>;
		pagesize = <1>;
		status = "okay";
	};

	rtc: nxp@51 {
		compatible = "nxp,pcf8563";
		reg = <0x51>;
	};
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	bitrate = <100000>;
	status = "disabled";
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	touch: edt-ft5x06@38 {
		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
		reg = <0x38>;
		interrupt-parent = <&gpio2>;
		interrupts = <14 0>;
	};
};

&ipu_di0_disp0 {
	remote-endpoint = <&disp0_in>;
};

/* RS485 --> X39 [13..14] */
&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	/* RTS via GPIO */
	fsl,uart-has-rtscts;
	rs485-enabled;
	gpio = <&gpio7 7 GPIO_ACTIVE_HIGH>;
	status = "okay";
};

&usbotg {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg>;
	vbus-supply = <&reg_usbotg>;
	status = "okay";
};

&usbh1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbh1>;
	status = "okay";
};

/* Serial debug console --> X39 [2..5] */
&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

/* Serial debug console --> X11 [5..7] */
&uart4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart4>;
	status = "okay";
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can1>;
	status = "okay";
};

&uart5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart5>;
	status = "okay";
};

&nfc {
	#address-cells = <1>;
	#size-cells = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_nand>;
	nand-bus-width = <8>;
	nand-ecc-mode = "hw";
	nand-on-flash-bbt;
	status = "okay";

	partition@0 {
		label = "barebox";
		reg = <0x0 0xe0000>;
	};

	bareboxenv: partition@e0000 {
		label = "barebox-environment";
		reg = <0xe0000 0x20000>;
	};

	partition@100000 {
		label = "ubi";
		reg = <0x100000 0x0>;
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	imx53-vincell-lt {
		pinctrl_can1: can1grp {
			fsl,pins = <
				MX53_PAD_GPIO_7__CAN1_TXCAN		0x00000000
				MX53_PAD_GPIO_8__CAN1_RXCAN		0x000001c4
			>;
		};

		pinctrl_hog: hoggrp {
			fsl,pins = <
				MX53_PAD_EIM_A25__EMI_WEIM_A_25 	0x000000e4
				MX53_PAD_EIM_A22__EMI_WEIM_A_22 	0x000000e4
				MX53_PAD_EIM_D16__EMI_WEIM_D_16 	0x000000a4
				MX53_PAD_EIM_D17__EMI_WEIM_D_17 	0x000000a4
				MX53_PAD_EIM_D18__EMI_WEIM_D_18 	0x000000a4
				MX53_PAD_EIM_D19__EMI_WEIM_D_19 	0x000000a4
				MX53_PAD_EIM_D20__EMI_WEIM_D_20 	0x000000a4
				MX53_PAD_EIM_D21__EMI_WEIM_D_21 	0x000000a4
				MX53_PAD_EIM_D22__EMI_WEIM_D_22 	0x000000a4
				MX53_PAD_EIM_D23__EMI_WEIM_D_23 	0x000000a4
				MX53_PAD_EIM_D24__EMI_WEIM_D_24 	0x000000a4
				MX53_PAD_EIM_D25__EMI_WEIM_D_25 	0x000000a4
				MX53_PAD_EIM_D26__EMI_WEIM_D_26 	0x000000a4
				MX53_PAD_EIM_D27__EMI_WEIM_D_27 	0x000000a4
				MX53_PAD_EIM_D28__EMI_WEIM_D_28 	0x000000a4
				MX53_PAD_EIM_D29__EMI_WEIM_D_29 	0x000000a4
				MX53_PAD_EIM_D30__EMI_WEIM_D_30 	0x000000a4
				MX53_PAD_EIM_D31__EMI_WEIM_D_31 	0x000000a4
				MX53_PAD_EIM_A24__EMI_WEIM_A_24 	0x000001e4
				MX53_PAD_EIM_A23__EMI_WEIM_A_23 	0x000001e4
				MX53_PAD_EIM_A22__EMI_WEIM_A_22 	0x000000e4
				MX53_PAD_EIM_A21__EMI_WEIM_A_21 	0x000000e4
				MX53_PAD_EIM_A20__EMI_WEIM_A_20 	0x000000a4
				MX53_PAD_EIM_A19__EMI_WEIM_A_19 	0x000000a4
				MX53_PAD_EIM_A18__EMI_WEIM_A_18 	0x000000a4
				MX53_PAD_EIM_A17__EMI_WEIM_A_17 	0x000000a4
				MX53_PAD_EIM_A16__EMI_WEIM_A_16 	0x000000a4
				MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 	0x000000a4
				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 	0x000000e4
				MX53_PAD_EIM_OE__EMI_WEIM_OE		0x000000a4
				MX53_PAD_EIM_RW__EMI_WEIM_RW		0x000000a4
				MX53_PAD_EIM_LBA__EMI_WEIM_LBA		0x000000e4
				MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 	0x000000a4
				MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 	0x000000a4
				MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 	0x000001e4
				MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 	0x000001e4
				MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT	0x000000e0
				MX53_PAD_LVDS0_TX3_P__GPIO7_22		0x80000000
				MX53_PAD_LVDS0_CLK_P__GPIO7_24		0x80000000
				MX53_PAD_LVDS0_TX2_P__GPIO7_26		0x80000000
				MX53_PAD_LVDS0_TX1_P__GPIO7_28		0x80000000
				MX53_PAD_LVDS0_TX0_P__GPIO7_30		0x80000000
				MX53_PAD_GPIO_1__GPIO1_1		0x000001c4
				MX53_PAD_GPIO_2__GPIO1_2		0x000001c4
				MX53_PAD_GPIO_10__GPIO4_0		0x000005e5
				MX53_PAD_GPIO_11__GPIO4_1		0x000005c5
				MX53_PAD_GPIO_12__GPIO4_2		0x000005e5
				MX53_PAD_GPIO_13__GPIO4_3		0x000005e5
				MX53_PAD_GPIO_14__GPIO4_4		0x000005e5
				MX53_PAD_GPIO_16__GPIO7_11		0x000001c4
				MX53_PAD_KEY_ROW2__GPIO4_11		0x000001e4
				MX53_PAD_PATA_DATA8__GPIO2_8		0x000001e4
				MX53_PAD_PATA_DATA12__PATA_DATA_12	0x000001e4
				MX53_PAD_PATA_DA_0__PATA_DA_0		0x000001e4

				/* UART5: MDB --> X39 [2..5] (shared with RS232) */
				MX53_PAD_PATA_DATA9__GPIO2_9		0x00000000	/* MDB_WAKEUP_OUT */

				/* UART3: RS485 --> X39 */
				MX53_PAD_PATA_DA_1__GPIO7_7		0x00000000	/* RS485_TX_EN */

				MX53_PAD_PATA_DATA4__GPIO2_4		0x00000000	/* FEC_nINT */

				/* LCD panel */
				MX53_PAD_DI0_PIN4__GPIO4_20		0x000004c4	/* lcd power */
				MX53_PAD_PATA_DATA2__GPIO2_2		0x00000000	/* backlight power */
				MX53_PAD_PATA_DATA5__GPIO2_5		0x00000020	/* lcd enable */
				MX53_PAD_GPIO_9__PWM1_PWMO		0x00000000	/* LCD backlight PWM1 out */

				/* ESDHC1 */
				MX53_PAD_PATA_DATA6__GPIO2_6		0x00000000	/* ESDHC1 CD */

				/* I2C system bus */
				/* MX53_PAD_CSI0_DAT8__GPIO5_26		0x00000000 */
				/* MX53_PAD_CSI0_DAT9__GPIO5_27	*/

				/* I2C external touch interface, disabled */
				/* MX53_PAD_GPIO_5__GPIO1_50x80000000 */
				/* MX53_PAD_GPIO_6__GPIO1_60x80000000 */

				/* External Touch */
				MX53_PAD_PATA_DATA13__GPIO2_13		0x00000000	/* TOUCH_RESET */
				MX53_PAD_PATA_DATA14__GPIO2_14		0x00000000	/* TOUCH_INT */
				MX53_PAD_PATA_DATA15__GPIO2_15		0x00000000	/* TOUCH_WAKE */

				/* Audio */
				MX53_PAD_PATA_DATA7__GPIO2_7 		0x00000000	/* Speaker on */

				/* Clockout for external USB-phy and audiocodec */
				MX53_PAD_GPIO_3__CCM_CLKO2 		0x00000000

				/* GPIOs on keypad connector (X21) */
				MX53_PAD_CSI0_DAT11__GPIO5_29		0x00000000	/* Pin 3 */
				MX53_PAD_PATA_DIOW__GPIO6_17		0x00000000	/* Pin 4 */
				MX53_PAD_SD2_CMD__GPIO1_11		0x00000000	/* Pin 5 */
				MX53_PAD_PATA_DMACK__GPIO6_18		0x00000000	/* Pin 6 */
				MX53_PAD_CSI0_DAT7__GPIO5_25		0x00000000	/* Pin 7 */
				MX53_PAD_GPIO_4__GPIO1_4		0x00000000	/* Pin 8 */
				MX53_PAD_KEY_ROW4__GPIO4_15		0x00000000	/* Pin 9 */
				MX53_PAD_KEY_COL4__GPIO4_14		0x00000000	/* Pin 10 */
				MX53_PAD_KEY_ROW3__GPIO4_13		0x00000000	/* Pin 11 */
				MX53_PAD_KEY_COL3__GPIO4_12		0x00000000	/* Pin 12 */
				MX53_PAD_GPIO_19__GPIO4_5		0x00000000	/* Pin 13 */
				MX53_PAD_KEY_COL2__GPIO4_10		0x00000000	/* Pin 14 */
				MX53_PAD_KEY_COL1__GPIO4_8		0x00000000	/* Pin 15 */
				MX53_PAD_KEY_ROW0__GPIO4_7		0x00000000	/* Pin 16 */
				MX53_PAD_KEY_COL0__GPIO4_6		0x00000000	/* Pin 17 */
				MX53_PAD_KEY_ROW1__GPIO4_9		0x00000000	/* Pin 18 */

				MX53_PAD_GPIO_17__GPIO7_12		0x000000e0	/* PMIC_nIRQ, 100 KOhm pull up */
			>;
		};

		pinctrl_disp0: disp0grp {
			fsl,pins = <
				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x000004c1
				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x000004c1
				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x000004c5
				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x000004c5
				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x000004c3
				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x000004c3
				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x000004c3
				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x000004c3
				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x000004c3
				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x000004c3
				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x000004c3
				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x000004c3
				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x000004c3
				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x000004c3
				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x000004c3
				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x000004c3
				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x000004c3
				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x000004c3
				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x000004c3
				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x000004c3
				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x000004c3
				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x000004c3
				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x000004c3
				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x000004c3
				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x000004c3
				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x000004c3
				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x000004c3
				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x000004c3
			>;
		};

		pinctrl_nand: nandgrp {
			fsl,pins = <
				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x00000004
				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x00000004
				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x00000004
				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x00000004
				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0x000000e4
				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0x000000e0
				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x00000004
				MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	0x000001e4
				MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	0x000001e4
				MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	0x000001e4

				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0x000000a4
				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0x000000a4
				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0x000000a4
				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0x000000a4
				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0x000000a4
				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0x000000a4
				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0x000000a4
				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0x000000a4
				MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8	0x000000e4
				MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9	0x000000e4
				MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10	0x000000e4
				MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11	0x000000e4
				MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12	0x000000e4
				MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13	0x000000e4
				MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14	0x000000e4
				MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15	0x000000e4
			>;
		};

		pinctrl_usbh1: usbh1grp {
			fsl,pins = <
				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x00000000	/* OC */
				MX53_PAD_GPIO_0__USBOH3_USBH1_PWR	0x00000000	/* PWR_EN */
			>;
		};

		pinctrl_usbotg: usbotggrp {
			fsl,pins = <
				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x00000084	/* OC */
				/* can not be used, odd transistor logic */
				MX53_PAD_CSI0_MCLK__GPIO5_19		0x00000000	/* PWR_EN */
			>;
		};

		pinctrl_esdhc1: esdhc1grp {
			fsl,pins = <
				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
			>;
		};

		pinctrl_uart3: uart3grp {
			fsl,pins = <
				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1c5
				MX53_PAD_PATA_CS_1__UART3_RXD_MUX 	0x1c5
			>;
		};

		pinctrl_uart2: uart2grp {
			fsl,pins = <
				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
			>;
		};

		pinctrl_audmux: audmuxgrp {
			fsl,pins = <
				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
			>;
		};

		pinctrl_fec: fecgrp {
			fsl,pins = <
				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
			>;
		};

		pinctrl_uart5: uart5grp {
			 fsl,pins = <
				 MX53_PAD_CSI0_DAT14__UART5_TXD_MUX 0x1c5
				 MX53_PAD_CSI0_DAT15__UART5_RXD_MUX 0x1c5
				 MX53_PAD_CSI0_DAT18__UART5_RTS     0x1c5
				 MX53_PAD_CSI0_DAT19__UART5_CTS     0x1c5
				 >;
		};

		pinctrl_i2c3: i2c3grp {
			 fsl,pins = <
				 MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
				 MX53_PAD_GPIO_5__I2C3_SCL 0xc0000000
			 >;
		};

		pinctrl_uart4: uart4grp {
			fsl,pins = <
				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1c5
				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1c5
				MX53_PAD_CSI0_DAT16__UART4_RTS     0x1c5
				MX53_PAD_CSI0_DAT17__UART4_CTS     0x1c5
			>;
		};
	};
};