#include <arm/imx6dl-tx6u-801x.dts>
#include "imx6qdl.dtsi"

/ {
	model = "Ka-Ro electronics TX6U-801x Module";
	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";

	chosen {
		linux,stdout-path = &uart1;

		environment@0 {
			compatible = "barebox,environment";
			device-path = &gpmi, "partname:barebox-environment";
		};
	};
};

&gpmi {
	partition@0 {
		label = "barebox";
		reg = <0x0 0x100000>;
	};

	partition@1 {
		label = "barebox-environment";
		reg = <0x100000 0x100000>;
	};
};

&iomuxc {
	imx6qdl-tx6 {
		pinctrl_hog: hoggrp {
			fsl,pins = <
				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
				MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT */
				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
			>;
		};

		pinctrl_enet: enetgrp {
			fsl,pins = <
				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
			>;
		};
	};
};

&fec {
	phy-reset-duration = <22>;
};

&ocotp {
	barebox,provide-mac-address = <&fec 0x620>;
};