// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2021 Rockchip Electronics Co., Ltd. * */ /dts-v1/; #include #include #include "rk3568.dtsi" / { model = "Rockchip RK3568 EVB1 DDR4 V10 Board"; compatible = "rockchip,rk3568-evb1-v10", "rockchip,rk3568"; aliases { emmc = &sdhci; sd = &sdmmc0; }; chosen: chosen { stdout-path = "serial2:1500000n8"; environment-sd { compatible = "barebox,environment"; device-path = &environment_sd; status = "disabled"; }; environment-emmc { compatible = "barebox,environment"; device-path = &environment_emmc; status = "disabled"; }; }; memory@a00000 { device_type = "memory"; reg = <0x0 0x00a00000 0x0 0x7f600000>; }; dc_12v: dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&dc_12v>; }; vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; vcc3v3_lcd0_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n"; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_lcd1_n: vcc3v3-lcd1-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd1_n"; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc5v0_otg: vcc5v0-otg-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_otg_en>; regulator-name = "vcc5v0_otg"; }; vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; regulator-always-on; }; }; &gmac0 { phy-mode = "rgmii"; clock_in_out = "output"; assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; assigned-clock-rates = <0>, <125000000>; pinctrl-names = "default"; pinctrl-0 = <&gmac0_miim &gmac0_tx_bus2 &gmac0_rx_bus2 &gmac0_rgmii_clk &gmac0_rgmii_bus>; tx_delay = <0x3c>; rx_delay = <0x2f>; phy-handle = <&rgmii_phy0>; status = "okay"; }; &gmac1 { phy-mode = "rgmii"; clock_in_out = "output"; assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; assigned-clock-rates = <0>, <125000000>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk &gmac1m1_rgmii_bus>; tx_delay = <0x4f>; rx_delay = <0x26>; phy-handle = <&rgmii_phy1>; status = "okay"; }; &i2c0 { status = "okay"; rk809: pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default", "pmic-sleep", "pmic-power-off", "pmic-reset"; pinctrl-0 = <&pmic_int>; pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; //fb-inner-reg-idxs = <2>; /* 1: rst regs (default in codes), 0: rst the pmic */ pmic-reset-func = <0>; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; vcc4-supply = <&vcc3v3_sys>; vcc5-supply = <&vcc3v3_sys>; vcc6-supply = <&vcc3v3_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; pwrkey { status = "okay"; }; pinctrl_rk8xx: pinctrl_rk8xx { gpio-controller; #gpio-cells = <2>; rk817_slppin_null: rk817_slppin_null { pins = "gpio_slp"; function = "pin_fun0"; }; rk817_slppin_slp: rk817_slppin_slp { pins = "gpio_slp"; function = "pin_fun1"; }; rk817_slppin_pwrdn: rk817_slppin_pwrdn { pins = "gpio_slp"; function = "pin_fun2"; }; rk817_slppin_rst: rk817_slppin_rst { pins = "gpio_slp"; function = "pin_fun3"; }; }; regulators { vdd_logic: DCDC_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_logic"; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: DCDC_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_gpu"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vdd_npu: DCDC_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_npu"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_image: LDO_REG1 { regulator-boot-on; regulator-always-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_image"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda_0v9: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda_0v9"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_pmu: LDO_REG3 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vccio_acodec: LDO_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_acodec"; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd: LDO_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_pmu: LDO_REG6 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc3v3_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcca_1v8: LDO_REG7 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_pmu: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca1v8_image: LDO_REG9 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_image"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v8: DCDC_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v3: SWITCH_REG1 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_3v3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_sd: SWITCH_REG2 { regulator-always-on; regulator-boot-on; regulator-name = "vcc3v3_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; }; &mdio0 { rgmii_phy0: phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; reset-assert-us = <20000>; reset-deassert-us = <100000>; reg = <0x0>; }; }; &mdio1 { rgmii_phy1: phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reset-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; reset-assert-us = <20000>; reset-deassert-us = <100000>; reg = <0x0>; }; }; &pinctrl { pmic { pmic_int: pmic_int { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; soc_slppin_gpio: soc_slppin_gpio { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>; }; soc_slppin_slp: soc_slppin_slp { rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>; }; soc_slppin_rst: soc_slppin_rst { rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>; }; }; usb { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; vcc5v0_otg_en: vcc5v0-otg-en { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &saradc { vref-supply = <&vcca_1v8>; status = "okay"; }; &sdhci { bus-width = <8>; max-frequency = <200000000>; non-removable; no-sd; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; partitions { compatible = "fixed-partitions"; #address-cells = <2>; #size-cells = <2>; environment_emmc: partition@408000 { label = "barebox-environment"; reg = <0x0 0x408000 0x0 0x8000>; }; }; }; &sdmmc0 { max-frequency = <150000000>; supports-sd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; disable-wp; sd-uhs-sdr104; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <2>; #size-cells = <2>; environment_sd: partition@408000 { label = "barebox-environment"; reg = <0x0 0x408000 0x0 0x8000>; }; }; }; &uart2 { status = "okay"; }; &u2phy0_host { phy-supply = <&vcc5v0_host>; status = "okay"; }; &u2phy0_otg { vbus-supply = <&vcc5v0_otg>; status = "okay"; }; &u2phy1_host { phy-supply = <&vcc5v0_host>; status = "okay"; }; &u2phy1_otg { phy-supply = <&vcc5v0_host>; status = "okay"; }; &usb2phy0 { status = "okay"; }; &usb2phy1 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usbdrd_dwc3 { dr_mode = "otg"; extcon = <&usb2phy0>; }; &usbdrd30 { status = "okay"; }; &usbhost30 { status = "okay"; }; &combphy0_us { status = "okay"; }; &combphy1_usq { status = "okay"; };