if ARCH_AT91 config HAVE_AT91_DBGU0 bool config HAVE_AT91_DBGU1 bool config HAVE_AT91_DBGU2 bool config HAVE_AT91_UTMI bool config HAVE_AT91_USB_CLK bool config COMMON_CLK_AT91 bool select COMMON_CLK select MFD_SYSCON config MACH_AT91SAM9263EK_DT def_bool y depends on MACH_AT91SAM9263EK && OFDEVICE help Enabled for at91sam9263ek - evaluation kit. But only if we need the device tree (bootstrap do not use DT) config HAVE_AT91_SMD bool config HAVE_AT91_H32MX bool config HAVE_AT91_GENERATED_CLK bool # Select if board support bootstrap config HAVE_AT91_BOOTSTRAP bool # Select if board uses the common at91sam926x_board_init config AT91SAM926X_BOARD_INIT bool config AT91SAM9_SMC bool config SOC_AT91SAM9 bool select CPU_ARM926T select AT91SAM9_SMC select CLOCKSOURCE_ATMEL_PIT select PINCTRL select HAVE_AT91_SMD select HAVE_AT91_USB_CLK select HAVE_AT91_UTMI config SOC_SAMA5 bool select CPU_V7 config SOC_SAMA5D2 bool select SOC_SAMA5 select AT91SAM9_SMC select CLOCKSOURCE_ATMEL_PIT config SOC_SAMA5D3 bool select SOC_SAMA5 select AT91SAM9_SMC select CLOCKSOURCE_ATMEL_PIT select HAVE_AT91_SMD select HAVE_AT91_USB_CLK select HAVE_AT91_UTMI config SOC_SAMA5D4 bool select SOC_SAMA5 select AT91SAM9_SMC select CLOCKSOURCE_ATMEL_PIT select HAVE_AT91_H32MX select HAVE_AT91_SMD select HAVE_AT91_USB_CLK select HAVE_AT91_UTMI config ARCH_TEXT_BASE hex default 0x73f00000 if ARCH_AT91SAM9G45 default 0x26f00000 if ARCH_AT91SAM9X5 default 0x20f00000 if ARCH_AT91RM9200 default 0x21f00000 if MACH_ANIMEO_IP default 0x23f00000 config HAVE_NAND_ATMEL_BUSWIDTH_16 bool config HAVE_AT91_DATAFLASH_CARD bool config HAVE_AT91_LOAD_BAREBOX_SRAM bool comment "Atmel AT91 System-on-Chip" config SOC_AT91RM9200 bool select CPU_ARM920T select HAS_AT91_ETHER select HAVE_AT91_DBGU0 select HAVE_AT91_USB_CLK config SOC_AT91SAM9260 bool select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAS_MACB help Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE or AT91SAM9G20 SoC. config SOC_AT91SAM9261 bool select SOC_AT91SAM9 select HAVE_AT91_DBGU0 help Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. config SOC_AT91SAM9263 bool select SOC_AT91SAM9 select HAVE_AT91_DBGU1 select HAS_MACB select HAVE_AT91_LOAD_BAREBOX_SRAM config SOC_AT91SAM9G45 bool select SOC_AT91SAM9 select HAVE_AT91_DBGU1 select HAS_MACB help Select this if you are using one of Atmel's AT91SAM9G45 family SoC. This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. config SOC_AT91SAM9X5 bool select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAS_MACB select COMMON_CLK_OF_PROVIDER help Select this if you are using one of Atmel's AT91SAM9x5 family SoC. This means that your SAM9 name finishes with a '5' (except if it is AT91SAM9G45!). This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35 and AT91SAM9X35. config SOC_AT91SAM9N12 bool select SOC_AT91SAM9 select HAVE_AT91_DBGU0 help Select this if you are using Atmel's AT91SAM9N12 SoC. choice prompt "Atmel AT91 Processor" config ARCH_AT91RM9200 bool "AT91RM9200" select SOC_AT91RM9200 config ARCH_AT91SAM9260 bool "AT91SAM9260" select SOC_AT91SAM9260 config ARCH_AT91SAM9261 bool "AT91SAM9261" select SOC_AT91SAM9261 select HAVE_AT91_LOAD_BAREBOX_SRAM config ARCH_AT91SAM9263 bool "AT91SAM9263" select SOC_AT91SAM9263 select HAVE_MACH_ARM_HEAD config ARCH_AT91SAM9G10 bool "AT91SAM9G10" select SOC_AT91SAM9261 select HAVE_MACH_ARM_HEAD config ARCH_AT91SAM9G20 bool "AT91SAM9G20" select SOC_AT91SAM9260 select HAVE_MACH_ARM_HEAD config ARCH_AT91SAM9G45 bool "AT91SAM9G45 or AT91SAM9M10" select SOC_AT91SAM9G45 select HAVE_MACH_ARM_HEAD config ARCH_AT91SAM9X5 bool "AT91SAM9X5" select SOC_AT91SAM9X5 select OFDEVICE config ARCH_AT91SAM9N12 bool "AT91SAM9N12" select SOC_AT91SAM9N12 select HAVE_MACH_ARM_HEAD config ARCH_SAMA5D3 bool "SAMA5D3x" select SOC_SAMA5D3 select HAVE_AT91_DBGU1 select HAS_MACB select HAVE_MACH_ARM_HEAD config ARCH_SAMA5D4 bool "SAMA5D4" select SOC_SAMA5D4 select HAVE_AT91_DBGU2 select HAS_MACB select HAVE_MACH_ARM_HEAD endchoice config ARCH_BAREBOX_MAX_BARE_INIT_SIZE hex default 0x1000 if ARCH_AT91SAM9260 default 0x27000 if ARCH_AT91SAM9261 default 0x12000 if ARCH_AT91SAM9263 default 0x4000 if ARCH_AT91SAM9G20 default 0x3000 if ARCH_AT91SAM9G10 default 0xF000 if ARCH_AT91SAM9G45 default 0x6000 if ARCH_AT91SAM9X5 default 0x6000 if ARCH_AT91SAM9N12 default 0x6000 if ARCH_SAMA5D3 default 0xffffffff config SUPPORT_CALAO_DAB_MMX bool config SUPPORT_CALAO_MOB_TNY_MD2 bool if !AT91_MULTI_BOARDS # ---------------------------------------------------------- if ARCH_AT91RM9200 choice prompt "AT91RM9200 Board Type" config MACH_AT91RM9200EK bool "Atmel AT91RM9200-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD help Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9260 choice prompt "AT91SAM9260 Board Type" config MACH_ANIMEO_IP bool "Somfy Animeo IP" depends on !CONSOLE_NONE config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Say y here if you are using Atmel's AT91SAM9260-EK Evaluation board config MACH_QIL_A9260 bool "CALAO QIL-A9260 board" help Select this if you are using a Calao Systems QIL-A9260 Board. config MACH_TNY_A9260 bool "CALAO TNY-A9260" select SUPPORT_CALAO_MOB_TNY_MD2 help Select this if you are using a Calao Systems TNY-A9260. config MACH_USB_A9260 bool "CALAO USB-A9260" select SUPPORT_CALAO_DAB_MMX help Select this if you are using a Calao Systems USB-A9260. config MACH_GE863 bool "Telit EVK-PRO3" help Say y here if you are using Telit EVK-PRO3 with GE863-PRO3 endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9261 choice prompt "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAS_DM9000 select HAVE_AT91_DATAFLASH_CARD select HAVE_NAND_ATMEL_BUSWIDTH_16 select HAVE_AT91_BOOTSTRAP select AT91SAM926X_BOARD_INIT help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. config MACH_PM9261 bool "Ronetix PM9261" select HAS_DM9000 select HAVE_AT91_BOOTSTRAP select AT91SAM926X_BOARD_INIT help Say y here if you are using the Ronetix PM9261 Board endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9G10 choice prompt "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 select HAS_DM9000 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9G20 choice prompt "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. config MACH_TNY_A9G20 select SUPPORT_CALAO_MOB_TNY_MD2 bool "CALAO TNY-A9G20" help Select this if you are using a Calao Systems TNY-A9G20. config MACH_USB_A9G20 bool "CALAO USB-A9G20" select SUPPORT_CALAO_DAB_MMX help Select this if you are using a Calao Systems USB-A9G20. config MACH_DSS11 bool "aizo dSS11" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using aizo dSS11 that embeds only one SD/MMC slot. config MACH_QIL_A9G20 bool "CALAO QIL-A9G20 board" help Select this if you are using a Calao Systems QIL-A9G20 Board. config MACH_HABA_KNX_LITE bool "CALAO HABA-KNX-LITE" help Select this if you are using a Calao Systems HABA-KNX-LITE. endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9263 choice prompt "AT91SAM9263 Board Type" config MACH_PM9263 bool "Ronetix PM9263" select HAVE_AT91_BOOTSTRAP select AT91SAM926X_BOARD_INIT help Say y here if you are using the Ronetix PM9263 Board config MACH_TNY_A9263 bool "CALAO TNY-A9263" select SUPPORT_CALAO_MOB_TNY_MD2 select HAVE_AT91_BOOTSTRAP select AT91SAM926X_BOARD_INIT help Select this if you are using a Calao Systems TNY-A9263. config MACH_USB_A9263 bool "CALAO USB-A9263" select HAVE_AT91_BOOTSTRAP select AT91SAM926X_BOARD_INIT help Select this if you are using a Calao Systems USB-A9263. endchoice endif if ARCH_AT91SAM9G45 choice prompt "AT91SAM9G45 or AT91SAM9M10 Board Type" config MACH_AT91SAM9M10IHD bool "Atmel AT91SAM9M10IDH Tablet" help Select this if you are using Atmel's AT91SAM9M10IHD Tablet config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kit" select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit or AT91SAM9G45-EKES or AT91SAM9M10-EKES (for those 2 select the LG LCD) config MACH_PM9G45 bool "Ronetix PM9G45" help Say y here if you are using the Ronetix PM9G45 Board endchoice endif # ---------------------------------------------------------- if ARCH_AT91SAM9N12 choice prompt "AT91SAM9N12 Board Type" config MACH_AT91SAM9N12EK bool "Atmel AT91SAM9N12 Evaluation Kit" help Select this if you are using Atmel's AT91SAM9N12-EK Evaluation Kit. endchoice endif # ---------------------------------------------------------- if ARCH_SAMA5D3 choice prompt "SAMA5D3 Board Type" config MACH_SAMA5D3XEK bool "Atmel SAMA5D3X Evaluation Kit" help Select this if you are using Atmel's SAMA5D3X-EK Evaluation Kit. config MACH_SAMA5D3_XPLAINED bool "Atmel SAMA5D3_XPLAINED Evaluation Kit" help Select this if you are using Atmel's SAMA5D3_XPLAINED Evaluation Kit. endchoice endif # ---------------------------------------------------------- if ARCH_SAMA5D4 choice prompt "SAMA5D4 Board Type" config MACH_SAMA5D4EK bool "Atmel SAMA5D4 Evaluation Kit" help Select this if you are using Atmel's SAMA5D4-EK Evaluation Kit. config MACH_SAMA5D4_XPLAINED bool "Atmel SAMA5D4 XPLAINED ULTRA Evaluation Kit" help Select this if you are using Atmel's SAMA5D4_XPLAINED ULTRA Evaluation Kit. endchoice endif endif # ---------------------------------------------------------- config AT91_MULTI_BOARDS bool "Allow multiple boards to be selected" select HAVE_PBL_MULTI_IMAGES if AT91_MULTI_BOARDS config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK" depends on ARCH_AT91SAM9263 select OFDEVICE select COMMON_CLK_OF_PROVIDER select HAVE_NAND_ATMEL_BUSWIDTH_16 select HAVE_AT91_BOOTSTRAP select AT91SAM926X_BOARD_INIT help Say y here if you are using Atmel's AT91SAM9263-EK Evaluation board config MACH_AT91SAM9X5EK bool "Atmel AT91SAM9x5 Series Evaluation Kit" depends on ARCH_AT91SAM9X5 help Select this if you re using Atmel's AT91SAM9x5-EK Evaluation Kit. Supported chips are sam9g15, sam9g25, sam9x25, sam9g35 and sam9x35. config MACH_MICROCHIP_KSZ9477_EVB bool "Microchip EVB-KSZ9477 Evaluation Kit" depends on ARCH_SAMA5D3 select OFDEVICE select COMMON_CLK_OF_PROVIDER help Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit. endif comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" depends on HAVE_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" depends on HAVE_NAND_ATMEL_BUSWIDTH_16 help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). config AT91_HAVE_2MMC bool "Have 2 MMC" depends on MACH_AT91SAM9G20EK help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and onwards. config AT91_HAVE_SRAM_128M bool "Have 128 of ram" depends on MACH_USB_A9G20 || MACH_USB_A9263 || MACH_QIL_A9260 || MACH_QIL_A9G20 help Select this if you board have 128 MiB of Ram (as USB_A9G20 C11) choice prompt "LCD type" depends on MACH_AT91SAM9M10G45EK config LCD_TRULY_TFT1N4633E bool "truly TFT1N4633-E" help Found on AT91SAM9M10G45-EK config LCD_LG_LB043WQ1 bool "LG philips LB043WQ1" help Found on AT91SAM9G45-EKES and AT91SAM9M10-EKES endchoice config CALAO_DAB_MMX bool "DAB MMX Daughter Board support" depends on SUPPORT_CALAO_DAB_MMX config CALAO_MOB_TNY_MD2 bool "MOB TNY MD2 Motherboard Daughter Board support" depends on SUPPORT_CALAO_MOB_TNY_MD2 config CALAO_MB_QIL_A9260 bool "MB-QIL A9260 Motherboard Board support" depends on MACH_QIL_A9260 || MACH_QIL_A9G20 config AT91_BOOTSTRAP bool "at91 bootstrap" depends on HAVE_AT91_BOOTSTRAP select BOOTSTRAP config AT91_LOAD_BAREBOX_SRAM bool "at91 load barebox in sram" depends on SHELL_NONE || HAVE_AT91_LOAD_BAREBOX_SRAM default y if SHELL_NONE endif