if ARCH_IMX config ARCH_TEXT_BASE hex default 0xa0000000 if MACH_EUKREA_CPUIMX27 default 0x08f00000 if MACH_MX1ADS default 0xc0000000 if MACH_IMX21ADS default 0xa0000000 if MACH_IMX27ADS default 0x87f00000 if MACH_FREESCALE_MX25_3STACK default 0x87f00000 if MACH_FREESCALE_MX35_3STACK default 0xa7f00000 if MACH_PCA100 default 0xa0000000 if MACH_PCM038 default 0x87f00000 if MACH_PCM037 default 0x87f00000 if MACH_PCM043 default 0x08f80000 if MACH_SCB9328 config BOARDINFO default "Eukrea CPUIMX27" if MACH_EUKREA_CPUIMX27 default "Freescale i.MX21 ADS" if MACH_IMX21ADS default "Freescale i.MX27 ADS" if MACH_IMX27ADS default "Freescale MX35 3Stack" if MACH_FREESCALE_MX35_3STACK default "Freescale MX25 3Stack" if MACH_FREESCALE_MX25_3STACK default "Phytec phyCard-i.MX27" if MACH_PCA100 default "Phytec phyCORE-i.MX27" if MACH_PCM038 default "Phytec phyCORE-i.MX31" if MACH_PCM037 default "Phytec phyCORE-i.MX35" if MACH_PCM043 default "Synertronixx scb9328" if MACH_SCB9328 config ARCH_HAS_FEC_IMX bool config ARCH_IMX_INTERNAL_BOOT bool "support internal boot mode" depends on ARCH_IMX25 || ARCH_IMX35 comment "Freescale i.MX System-on-Chip" choice prompt "Freescale i.MX Processor" config ARCH_IMX1 bool "i.MX1" select CPU_ARM920T config ARCH_IMX21 bool "i.MX21" select CPU_ARM926T config ARCH_IMX25 bool "i.MX25" select CPU_ARM926T select ARCH_HAS_FEC_IMX config ARCH_IMX27 bool "i.MX27" select CPU_ARM926T select ARCH_HAS_FEC_IMX config ARCH_IMX31 bool "i.MX31" config ARCH_IMX35 bool "i.MX35" select ARCH_HAS_FEC_IMX endchoice # ---------------------------------------------------------- if ARCH_IMX1 choice prompt "i.MX1 Board Type" config MACH_MX1ADS bool "mx1ads" select HAS_CS8900 help Say Y here if you are using the Motorola MX1ADS board config MACH_SCB9328 bool "Synertronixx scb9328" select HAS_DM9000 select HAS_CFI select MACH_HAS_LOWLEVEL_INIT select HAVE_MMU help Say Y here if you are using the Synertronixx scb9328 board endchoice endif # ---------------------------------------------------------- if ARCH_IMX21 choice prompt "i.MX21 Board Type" config MACH_IMX21ADS bool "Freescale i.MX21ADS" select HAS_CFI select MACH_HAS_LOWLEVEL_INIT select HAS_CS8900 help Say Y here if you are using the Freescale i.MX21ads board equipped with a Freescale i.MX21 Processor endchoice endif # ---------------------------------------------------------- if ARCH_IMX25 choice prompt "i.MX25 Board Type" config MACH_FREESCALE_MX25_3STACK bool "Freescale MX25 3stack" select HAS_CFI select MACH_HAS_LOWLEVEL_INIT help Say Y here if you are using the Freescale MX25 3stack board equipped with a Freescale i.MX25 Processor endchoice endif # ---------------------------------------------------------- if ARCH_IMX27 choice prompt "i.MX27 Board Type" config MACH_EUKREA_CPUIMX27 bool "EUKREA CPUIMX27" select HAS_CFI select HAVE_MMU select MACH_HAS_LOWLEVEL_INIT help Say Y here if you are using Eukrea's CPUIMX27 equipped with a Freescale i.MX27 Processor config MACH_IMX27ADS bool "Freescale i.MX27ADS" select HAS_CFI select MACH_HAS_LOWLEVEL_INIT help Say Y here if you are using the Freescale i.MX27ads board equipped with a Freescale i.MX27 Processor config MACH_PCA100 bool "phyCard-i.MX27" select MACH_HAS_LOWLEVEL_INIT select HAVE_MMU help Say Y here if you are using Phytec's phyCard-i.MX27 (pca100) equipped with a Freescale i.MX27 Processor config MACH_PCM038 bool "phyCORE-i.MX27" select HAS_CFI select MACH_HAS_LOWLEVEL_INIT select SPI select DRIVER_SPI_IMX select DRIVER_SPI_MC13783 select HAVE_MMU help Say Y here if you are using Phytec's phyCORE-i.MX27 (pcm038) equipped with a Freescale i.MX27 Processor endchoice endif # ---------------------------------------------------------- if ARCH_IMX31 choice prompt "i.MX31 Board Type" config MACH_PCM037 bool "phyCORE-i.MX31" select MACH_HAS_LOWLEVEL_INIT select USB_ISP1504 if USB help Say Y here if you are using Phytec's phyCORE-i.MX31 (pcm037) equipped with a Freescale i.MX31 Processor endchoice endif # ---------------------------------------------------------- if ARCH_IMX35 choice prompt "i.MX35 Board Type" config MACH_FREESCALE_MX35_3STACK bool "Freescale MX35 3stack" select HAS_CFI select MACH_HAS_LOWLEVEL_INIT select I2C select DRIVER_I2C_IMX select DRIVER_I2C_MC13892 select DRIVER_I2C_MC9SDZ60 help Say Y here if you are using the Freescale MX35 3stack board equipped with a Freescale i.MX35 Processor config MACH_PCM043 bool "phyCORE-i.MX35" select HAS_CFI select HAVE_MMU select MACH_HAS_LOWLEVEL_INIT help Say Y here if you are using Phytec's phyCORE-i.MX35 (pcm043) equipped with a Freescale i.MX35 Processor endchoice endif # ---------------------------------------------------------- menu "Board specific settings " if MACH_PCM043 choice prompt "Display type" config PCM043_DISPLAY_SHARP bool "Sharp LQ035Q7" config PCM043_DISPLAY_TY090 bool "TX090" endchoice endif if MACH_PCM037 choice prompt "SDRAM Bank0" config PCM037_SDRAM_BANK0_128MB bool "128MB" config PCM037_SDRAM_BANK0_256MB bool "256MB" endchoice choice prompt "SDRAM Bank1" config PCM037_SDRAM_BANK1_NONE bool "none" config PCM037_SDRAM_BANK1_128MB bool "128MB" config PCM037_SDRAM_BANK1_256MB bool "256MB" endchoice endif if MACH_EUKREA_CPUIMX27 choice prompt "SDRAM Size" config EUKREA_CPUIMX27_SDRAM_128MB bool "128 MB" config EUKREA_CPUIMX27_SDRAM_256MB bool "256 MB" endchoice choice prompt "NOR Flash Size" config EUKREA_CPUIMX27_NOR_32MB bool "<= 32 MB" config EUKREA_CPUIMX27_NOR_64MB bool "> 32 MB" endchoice choice prompt "Quad UART Port" depends on DRIVER_SERIAL_NS16550 config EUKREA_CPUIMX27_QUART1 bool "Q1" config EUKREA_CPUIMX27_QUART2 bool "Q2" config EUKREA_CPUIMX27_QUART3 bool "Q3" config EUKREA_CPUIMX27_QUART4 bool "Q4" endchoice endif endmenu menu "i.MX specific settings " config IMX_CLKO bool "clko command" depends on ARCH_IMX21 || ARCH_IMX27 || ARCH_IMX35 || ARCH_IMX25 help The i.MX SoCs have a Pin which can output different reference frequencies. Say y here if you want to have the clko command which lets you select the frequency to output on this pin. endmenu endif