# # OMAP Architecture specific features # # (C) Copyright 2008 # Texas Instruments, # Nishanth Menon # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA menu "OMAP Features" depends on ARCH_OMAP config MACH_OMAP bool config OMAP3_LOWLEVEL_INIT bool choice prompt "Select OMAP Variant" config ARCH_OMAP3 bool "OMAP3" select CPU_V7 select GENERIC_GPIO select OMAP3_LOWLEVEL_INIT select ARCH_HAS_LOWLEVEL_INIT select OMAP_CLOCK_SOURCE_S32K help Say Y here if you are using Texas Instrument's OMAP343x based platform config ARCH_OMAP4 bool "OMAP4" select CPU_V7 select GENERIC_GPIO select OMAP_CLOCK_SOURCE_S32K help Say Y here if you are using Texas Instrument's OMAP4 based platform endchoice # Blind enable all possible clocks.. think twice before you do this. config OMAP_CLOCK_SOURCE_S32K bool config OMAP3_CLOCK_CONFIG prompt "Clock Configuration" bool depends on ARCH_OMAP3 default y help Say Y here if you like to have OMAP3 Clock configuration done. config OMAP_GPMC prompt "Support for GPMC configuration" bool depends on (ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4) default y help Enable this if you use Texas Instrument's General purpose Memory Controller(GPMC). GPMC allows you to configure devices such as NOR, NAND, OneNAND etc. config OMAP_BUILD_IFT prompt "build ift binary" bool config OMAP_BUILD_SPI prompt "build SPI binary" bool help Say Y here if you want to build an barebox.spi image as used on the AM35xx chips when booting form SPI NOR flash. config ARCH_TEXT_BASE hex default 0x80e80000 if MACH_OMAP343xSDP default 0x80e80000 if MACH_BEAGLE config BOARDINFO default "Texas Instrument's SDP343x" if MACH_OMAP343xSDP default "Texas Instrument's Beagle" if MACH_BEAGLE default "Texas Instrument's OMAP3EVM" if MACH_OMAP3EVM default "Texas Instrument's Panda" if MACH_PANDA default "Phytec phyCORE pcm049" if MACH_PCM049 default "Phytec phyCARD-A-L1" if MACH_PCAAL1 default "Phytec phyCARD-A-XL2" if MACH_PCAAXL2 choice prompt "Select OMAP board" config MACH_OMAP343xSDP bool "Texas Instrument's SDP343x" depends on ARCH_OMAP3 help Say Y here if you are using SDP343x platform config MACH_BEAGLE bool "Texas Instrument's Beagle Board" select HAVE_NOSHELL depends on ARCH_OMAP3 help Say Y here if you are using Beagle Board config MACH_OMAP3EVM bool "Texas Instrument's OMAP3 EVM" select HAVE_NOSHELL depends on ARCH_OMAP3 help Say Y here if you are using OMAP3EVM config MACH_PANDA bool "Texas Instrument's Panda Board" select HAVE_NOSHELL select MACH_HAS_LOWLEVEL_INIT depends on ARCH_OMAP4 help Say Y here if you are using OMAP4 Panda board config MACH_PCM049 bool "Phytec phyCORE pcm049" select HAVE_NOSHELL depends on ARCH_OMAP4 select MACH_HAS_LOWLEVEL_INIT help Say Y here if you are using Phytecs phyCORE pcm049 board based on OMAP4 config MACH_PCAAL1 bool "Phytec phyCARD-A-L1" select HAVE_NOSHELL depends on ARCH_OMAP3 help Say Y here if you are using a phyCARD-A-L1 PCA-A-L1 config MACH_PCAAXL2 bool "Phytec phyCARD XL2" select HAVE_NOSHELL select MACH_HAS_LOWLEVEL_INIT depends on ARCH_OMAP4 help Say Y here if you are using a phyCARD-A-XL1 PCA-A-XL1 endchoice if MACH_OMAP3EVM choice prompt "Select UART" config OMAP3EVM_UART1 bool "Use UART1" depends on MACH_OMAP3EVM help Say Y here if you would like to use UART1 as console. config OMAP3EVM_UART3 bool "Use UART3" depends on MACH_OMAP3EVM help Say Y here if you would like to use UART3 as console. endchoice endif config MACH_OMAP_ADVANCED_MUX bool "Enable advanced pin muxing" depends on MACH_OMAP343xSDP default n help Say Y here if you would like to have complete pin muxing to be done at boot time endmenu