/*
 * Copyright 2008-2012 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 */

/*
 * Generic driver for Freescale DDR2/DDR3 memory controller.
 * Based on code from spd_sdram.c
 * Author: James Yang [at freescale.com]
 */

#include <common.h>
#include <asm/fsl_ddr_sdram.h>
#include "ddr.h"

static uint32_t compute_cas_write_latency(void)
{
	uint32_t  cwl;
	const uint32_t mclk_ps = get_memory_clk_period_ps();

	if (mclk_ps >= 2500)
		cwl = 5;
	else if (mclk_ps >= 1875)
		cwl = 6;
	else if (mclk_ps >= 1500)
		cwl = 7;
	else if (mclk_ps >= 1250)
		cwl = 8;
	else if (mclk_ps >= 1070)
		cwl = 9;
	else if (mclk_ps >= 935)
		cwl = 10;
	else if (mclk_ps >= 833)
		cwl = 11;
	else if (mclk_ps >= 750)
		cwl = 12;
	else
		cwl = 12;

	return cwl;
}

static void set_csn_config(int dimm_number, int i,
			   struct fsl_ddr_cfg_regs_s *ddr,
			   const struct memctl_options_s *popts,
			   const struct dimm_params_s *dimm)
{
	uint32_t cs_n_en = 0, ap_n_en = 0, odt_rd_cfg = 0, odt_wr_cfg = 0,
		 ba_bits_cs_n = 0, row_bits_cs_n = 0, col_bits_cs_n = 0,
		 n_banks_per_sdram_device;
	int go_config = 0;

	switch (i) {
	case 0:
		if (dimm[dimm_number].n_ranks > 0)
			go_config = 1;
		break;
	case 1:
		if ((dimm_number == 0 && dimm[0].n_ranks > 1) ||
		    (dimm_number == 1 && dimm[1].n_ranks > 0))
			go_config = 1;
		break;
	case 2:
		if ((dimm_number == 0 && dimm[0].n_ranks > 2) ||
		    (dimm_number >= 1 && dimm[dimm_number].n_ranks > 0))
			go_config = 1;
		break;
	case 3:
		if ((dimm_number == 0 && dimm[0].n_ranks > 3) ||
		    (dimm_number == 1 && dimm[1].n_ranks > 1) ||
		    (dimm_number == 3 && dimm[3].n_ranks > 0))
			go_config = 1;
		break;
	default:
		break;
	}

	if (go_config) {
		/* Chip Select enable */
		cs_n_en = 1;
		/* CSn auto-precharge enable */
		ap_n_en = popts->cs_local_opts[i].auto_precharge;
		/* ODT for reads configuration */
		odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
		/* ODT for writes configuration */
		odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
		/* Num of bank bits for SDRAM on CSn */
		n_banks_per_sdram_device =
			dimm[dimm_number].n_banks_per_sdram_device;
		ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
		/* Num of row bits for SDRAM on CSn */
		row_bits_cs_n = dimm[dimm_number].n_row_addr - 12;
		/* Num of ocl bits for SDRAM on CSn */
		col_bits_cs_n = dimm[dimm_number].n_col_addr - 8;
	}

	ddr->cs[i].config = (((cs_n_en & 0x1) << 31)
			     | ((ap_n_en & 0x1) << 23)
			     | ((odt_rd_cfg & 0x7) << 20)
			     | ((odt_wr_cfg & 0x7) << 16)
			     | ((ba_bits_cs_n & 0x3) << 14)
			     | ((row_bits_cs_n & 0x7) << 8)
			     | ((col_bits_cs_n & 0x7) << 0));
}

static void set_timing_cfg_0(struct fsl_ddr_cfg_regs_s *ddr,
			     const struct memctl_options_s *popts,
			     const struct dimm_params_s *dimm)
{
	uint32_t trwt_mclk = 0, twrt_mclk = 0, act_pd_exit_mclk,
		 pre_pd_exit_mclk, taxpd_mclk, tmrd_mclk, txp,
		 data_rate = fsl_get_ddr_freq(0);

	if (popts->sdram_type == SDRAM_TYPE_DDR2) {
		act_pd_exit_mclk = popts->txard;
		pre_pd_exit_mclk = popts->txp;
		taxpd_mclk = popts->taxpd;
		tmrd_mclk = popts->tmrd;
	} else {
		/*
		 * tXARD is not part of the DDR3 specification, use the
		 * parameter txp instead of it. That is:
		 * txp=max(3nCK, 7.5ns).  As well, use tAXPD=1.
		 */
		txp = max_t(uint32_t, (get_memory_clk_period_ps() * 3), 7500);
		data_rate = fsl_get_ddr_freq(0);
		tmrd_mclk = 4;

		/* for faster clock, need more time for data setup */
		if (popts->trwt_override)
			trwt_mclk = popts->trwt;
		else if (data_rate / 1000000 > 1800)
			trwt_mclk = 2;
		else
			trwt_mclk = 0;

		if (data_rate / 1000000 > 1150)
			twrt_mclk = 1;
		else
			twrt_mclk = 0;

		taxpd_mclk = 1;
		if (popts->dynamic_power == 0) {
			act_pd_exit_mclk = 1;
			pre_pd_exit_mclk = 1;
		} else {
			/* act_pd_exit_mclk = tXARD, see above */
			act_pd_exit_mclk = picos_to_mclk(txp);
			/* Mode register MR0[A12] is '1' - fast exit */
			pre_pd_exit_mclk = act_pd_exit_mclk;
		}
	}

	ddr->timing_cfg_0 = (((trwt_mclk & 0x3) << 30)
			     | ((twrt_mclk & 0x3) << 28)
			     | ((act_pd_exit_mclk & 0xf) << 20)
			     | ((pre_pd_exit_mclk & 0xf) << 16)
			     | ((taxpd_mclk & 0xf) << 8)
			     | ((tmrd_mclk & 0x1f) << 0)
			     );
}

static void set_timing_cfg_3(struct fsl_ddr_cfg_regs_s *ddr,
			     const struct memctl_options_s *popts,
			     const struct common_timing_params_s *dimm,
			     uint32_t cas_latency, uint32_t additive_latency)
{
	uint32_t ext_pretoact, ext_acttopre, ext_acttorw, ext_refrec, ext_wrrec;

	ext_pretoact = picos_to_mclk(dimm->tRP_ps) >> 4;
	ext_acttopre = picos_to_mclk(dimm->tRAS_ps) >> 4;
	ext_acttorw = picos_to_mclk(dimm->tRCD_ps) >> 4;
	cas_latency = ((cas_latency << 1) - 1) >> 4;
	additive_latency = additive_latency >> 4;
	ext_refrec = (picos_to_mclk(dimm->tRFC_ps) - 8) >> 4;
	/* ext_wrrec only deals with 16 clock and above, or 14 with OTF */
	ext_wrrec = (picos_to_mclk(dimm->tWR_ps) +
			(popts->otf_burst_chop_en ? 2 : 0)) >> 4;

	ddr->timing_cfg_3 = (((ext_pretoact & 0x1) << 28)
			     | ((ext_acttopre & 0x3) << 24)
			     | ((ext_acttorw & 0x1) << 22)
			     | ((ext_refrec & 0x1F) << 16)
			     | ((cas_latency & 0x3) << 12)
			     | ((additive_latency & 0x1) << 10)
			     | ((ext_wrrec & 0x1) << 8)
			     );
}

static void set_timing_cfg_1(struct fsl_ddr_cfg_regs_s *ddr,
			     const struct memctl_options_s *popts,
			     const struct common_timing_params_s *dimm,
			     uint32_t cas_latency)
{
	uint32_t pretoact_mclk, acttopre_mclk, acttorw_mclk, refrec_ctrl,
		 wrrec_mclk, acttoact_mclk, wrtord_mclk;
	/* DDR_SDRAM_MODE doesn't support 9,11,13,15 */
	static const u8 wrrec_table[] = {
		1, 2, 3, 4, 5, 6, 7, 8, 10, 10, 12, 12, 14, 14, 0, 0
	};

	pretoact_mclk = picos_to_mclk(dimm->tRP_ps);
	acttopre_mclk = picos_to_mclk(dimm->tRAS_ps);
	acttorw_mclk = picos_to_mclk(dimm->tRCD_ps);

	/*
	 * Translate CAS Latency to a DDR controller field value:
	 *
	 *      CAS Lat DDR II  Ctrl
	 *      Clocks  SPD Bit Value
	 *      ------- ------- ------
	 *      1.0             0001
	 *      1.5             0010
	 *      2.0     2       0011
	 *      2.5             0100
	 *      3.0     3       0101
	 *      3.5             0110
	 *      4.0     4       0111
	 *      4.5             1000
	 *      5.0     5       1001
	 */
	cas_latency = (cas_latency << 1) - 1;
	refrec_ctrl = picos_to_mclk(dimm->tRFC_ps) - 8;
	acttoact_mclk = picos_to_mclk(dimm->tRRD_ps);

	wrrec_mclk = picos_to_mclk(dimm->tWR_ps);
	if (wrrec_mclk <= 16)
		wrrec_mclk = wrrec_table[wrrec_mclk - 1];
	if (popts->otf_burst_chop_en)
		wrrec_mclk += 2;

	wrtord_mclk = picos_to_mclk(dimm->tWTR_ps);
	if (popts->sdram_type == SDRAM_TYPE_DDR2) {
		wrtord_mclk = max_t(uint32_t, wrtord_mclk, 2);
	} else {
		wrtord_mclk = max_t(uint32_t, wrtord_mclk, 4);
		acttoact_mclk = max_t(uint32_t, acttoact_mclk, 4);
	}

	if (popts->otf_burst_chop_en)
		wrtord_mclk += 2;

	ddr->timing_cfg_1 = (((pretoact_mclk & 0x0F) << 28)
			     | ((acttopre_mclk & 0x0F) << 24)
			     | ((acttorw_mclk & 0xF) << 20)
			     | ((cas_latency & 0xF) << 16)
			     | ((refrec_ctrl & 0xF) << 12)
			     | ((wrrec_mclk & 0x0F) << 8)
			     | ((acttoact_mclk & 0x0F) << 4)
			     | ((wrtord_mclk & 0x0F) << 0));
}

static void set_timing_cfg_2(struct fsl_ddr_cfg_regs_s *ddr,
			     const struct memctl_options_s *popts,
			     const struct common_timing_params_s *dimm,
			     uint32_t cas_latency, uint32_t additive_latency)
{
	uint32_t cpo, rd_to_pre, wr_data_delay, cke_pls, four_act;

	cpo = popts->cpo_override;
	rd_to_pre = picos_to_mclk(dimm->tRTP_ps);
	if (popts->sdram_type == SDRAM_TYPE_DDR2) {
		cas_latency = cas_latency - 1;
		rd_to_pre = max_t(uint32_t, rd_to_pre, 2);
	} else {
		cas_latency = compute_cas_write_latency();
		rd_to_pre = max_t(uint32_t, rd_to_pre, 4);
	}

	if (popts->otf_burst_chop_en)
		rd_to_pre += 2;

	wr_data_delay = popts->write_data_delay;
	cke_pls = picos_to_mclk(popts->tCKE_clock_pulse_width_ps);
	four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps);

	ddr->timing_cfg_2 = (((additive_latency & 0xf) << 28)
			     | ((cpo & 0x1f) << 23)
			     | ((cas_latency & 0xf) << 19)
			     | ((rd_to_pre & 7) << 13)
			     | ((wr_data_delay & 7) << 10)
			     | ((cke_pls & 0x7) << 6)
			     | ((four_act & 0x3f) << 0));
}

static void set_ddr_sdram_cfg(struct fsl_ddr_cfg_regs_s *ddr,
			      const struct memctl_options_s *popts,
			      const struct common_timing_params_s *dimm)
{
	uint32_t mem_en, sren, ecc_en, sdram_type, dyn_pwr, dbw, twoT_en, hse,
		 threet_en, eight_be = 0;

	mem_en = 1;
	sren = popts->self_refresh_in_sleep;
	if (dimm->all_DIMMs_ECC_capable)
		ecc_en = popts->ECC_mode;
	else
		ecc_en = 0;

	sdram_type = popts->sdram_type;
	twoT_en = popts->twoT_en;
	dyn_pwr = popts->dynamic_power;
	dbw = popts->data_bus_width;
	hse = popts->half_strength_driver_enable;
	threet_en = popts->threet_en;

	if (sdram_type == SDRAM_TYPE_DDR3)
		if ((popts->burst_length == DDR_BL8) || (dbw == 1))
			eight_be = 1;

	ddr->ddr_sdram_cfg = (((mem_en & 0x1) << 31)
			      | ((sren & 0x1) << 30)
			      | ((ecc_en & 0x1) << 29)
			      | ((sdram_type & 0x7) << 24)
			      | ((dyn_pwr & 0x1) << 21)
			      | ((dbw & 0x3) << 19)
			      | ((eight_be & 0x1) << 18)
			      | ((threet_en & 0x1) << 16)
			      | ((twoT_en & 0x1) << 15)
			      | ((hse & 0x1) << 3));
}

static void set_ddr_sdram_cfg_2(struct fsl_ddr_cfg_regs_s *ddr,
				const struct memctl_options_s *popts)
{
	struct ddr_board_info_s *bi = popts->board_info;
	uint32_t i, dll_rst_dis, dqs_cfg, odt_cfg = 0, num_pr, d_init = 0,
		 obc_cfg = 0, x4_en, md_en = 0, rcw_en = 0;

	dll_rst_dis = popts->dll_rst_dis;
	dqs_cfg = popts->DQS_config;

	/*
	 * Check for On-Die Termination options and
	 * assert ODT only during reads to DRAM.
	 */
	for (i = 0; i < bi->cs_per_ctrl; i++)
		if (popts->cs_local_opts[i].odt_rd_cfg ||
				popts->cs_local_opts[i].odt_wr_cfg) {
			odt_cfg = SDRAM_CFG2_ODT_ONLY_READ;
			break;
		}

	/* Default number of posted refresh */
	num_pr = 1;

	if (popts->ECC_init_using_memctl) {
		d_init = 1;
		ddr->ddr_data_init = popts->data_init;
	}

	if (popts->sdram_type == SDRAM_TYPE_DDR3) {
		obc_cfg = popts->otf_burst_chop_en;
		md_en = popts->mirrored_dimm;
	}

	x4_en = popts->x4_en ? 1 : 0;

	ddr->ddr_sdram_cfg_2 = (((dll_rst_dis & 0x1) << 29)
				| ((dqs_cfg & 0x3) << 26)
				| ((odt_cfg & 0x3) << 21)
				| ((num_pr & 0xf) << 12)
				| (x4_en << 10)
				| ((obc_cfg & 0x1) << 6)
				| ((d_init & 0x1) << 4)
				| ((rcw_en & 0x1) << 2)
				| ((md_en & 0x1) << 0)
				);
}

static void set_ddr_sdram_mode_2(struct fsl_ddr_cfg_regs_s *ddr,
				const struct memctl_options_s *popts,
				const struct common_timing_params_s *dimm)
{
	uint16_t esdmode2;
	uint32_t rtt_wr, srt = 0, cwl;

	cwl = compute_cas_write_latency() - 5;

	if (popts->rtt_override)
		rtt_wr = popts->rtt_wr_override_value;
	else
		rtt_wr = popts->cs_local_opts[0].odt_rtt_wr;

	if (dimm->extended_op_srt)
		srt = dimm->extended_op_srt;

	esdmode2 = (((rtt_wr & 0x3) << 9)
		    | ((srt & 0x1) << 7)
		    | ((cwl & 0x7) << 3)
		    );

	ddr->ddr_sdram_mode_2 = (esdmode2 & 0xffff) << 16;
}

static void
set_ddr_sdram_interval(struct fsl_ddr_cfg_regs_s *ddr,
		const struct memctl_options_s *popts,
		const struct common_timing_params_s *dimm)
{
	uint32_t refint, bstopre;

	refint = picos_to_mclk(dimm->refresh_rate_ps);
	/* Precharge interval */
	bstopre = popts->bstopre;

	ddr->ddr_sdram_interval = (((refint & 0xFFFF) << 16)
				   | ((bstopre & 0x3FFF) << 0));
}
void set_ddr3_sdram_mode(struct fsl_ddr_cfg_regs_s *ddr,
			       const struct memctl_options_s *popts,
			       const struct common_timing_params_s *dimm,
			       uint32_t cas_latency, uint32_t additive_latency)
{
	uint16_t esdmode, sdmode;
	/* Mode Register - MR1 */
	uint32_t rtt, al;
	/* Mode Register - MR0 */
	uint32_t dll_on, wr = 0, dll_rst, mode, caslat = 4, bt, bl, wr_mclk;
	/*
	 * DDR_SDRAM_MODE doesn't support 9,11,13,15
	 * Please refer JEDEC Standard No. 79-3E for Mode Register MR0
	 * for this table
	 */
	static const u8 wr_table[] = {1, 2, 3, 4, 5, 5, 6, 6, 7, 7, 0, 0};
	uint8_t cas_latency_table[] = { /* From 5 to 16 clocks */
		0x2, 0x4, 0x6, 0x8, 0xa, 0xc, 0xe, 0x1, 0x3, 0x5, 0x7, 0x9,
	};
	const unsigned int mclk_ps = get_memory_clk_period_ps();

	if (popts->rtt_override)
		rtt = popts->rtt_override_value;
	else
		rtt = popts->cs_local_opts[0].odt_rtt_norm;

	if (additive_latency == (cas_latency - 1))
		al = 1;
	else if (additive_latency == (cas_latency - 2))
		al = 2;
	else
		al = 0;

	/*
	 * The esdmode value will also be used for writing
	 * MR1 during write leveling for DDR3, although the
	 * bits specifically related to the write leveling
	 * scheme will be handled automatically by the DDR
	 * controller. So wrlvl_en is set to 0 here.
	 */
	esdmode = (((rtt & 0x4) << 7)
		   | ((rtt & 0x2) << 5)
		   | ((al & 0x3) << 3)
		   | ((rtt & 0x1) << 2)
		   );

	/*
	 * DLL control for precharge PD
	 * 0=slow exit DLL off (tXPDLL)
	 * 1=fast exit DLL on (tXP)
	 */
	dll_on = 1;

	wr_mclk = (dimm->tWR_ps + mclk_ps - 1) / mclk_ps;
	if (wr_mclk <= 16)
		wr = wr_table[wr_mclk - 5];

	dll_rst = 0;	/* dll no reset */
	mode = 0;	/* normal mode */

	/* look up table to get the cas latency bits */
	if (cas_latency >= 5 && cas_latency <= 16)
		caslat = cas_latency_table[cas_latency - 5];

	/* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */
	bt = 0;

	switch (popts->burst_length) {
	case DDR_BL8:
		bl = 0;
		break;
	case DDR_OTF:
		bl = 1;
		break;
	case DDR_BC4:
		bl = 2;
		break;
	default:
		bl = 1;
		break;
	}

	sdmode = (((dll_on & 0x1) << 12)
		  | ((wr & 0x7) << 9)
		  | ((dll_rst & 0x1) << 8)
		  | ((mode & 0x1) << 7)
		  | (((caslat >> 1) & 0x7) << 4)
		  | ((bt & 0x1) << 3)
		  | ((caslat & 1) << 2)
		  | ((bl & 0x3) << 0)
		  );

	ddr->ddr_sdram_mode = (((esdmode & 0xffff) << 16)
			       | ((sdmode & 0xffff) << 0)
			       );
}

void set_ddr2_sdram_mode(struct fsl_ddr_cfg_regs_s *ddr,
			       const struct memctl_options_s *popts,
			       const struct common_timing_params_s *dimm,
			       uint32_t cas_latency, uint32_t additive_latency)
{
	uint16_t esdmode, sdmode;
	uint32_t dqs_en, rtt, al, wr, bl;
	const uint32_t mclk_ps = get_memory_clk_period_ps();

	/* DQS# Enable: 0=enable, 1=disable */
	dqs_en = !popts->DQS_config;
	/* Posted CAS# additive latency (AL) */
	al = additive_latency;
	/* Internal Termination Resistor */
	if (popts->rtt_override)
		rtt = popts->rtt_override_value;
	else
		rtt = popts->cs_local_opts[0].odt_rtt_norm;

	/*
	 * Extended SDRAM mode.
	 * The variable also selects:
	 * - OCD set to exit mode
	 * - all outputs bit i.e DQ, DQS, RDQS output enabled
	 * - RDQS ball disabled
	 * - DQS ball enabled
	 * - DLL enabled
	 * - Output drive strength: full strength.
	 */
	esdmode = (((dqs_en & 0x1) << 10)
		   | ((rtt & 0x2) << 5)
		   | ((al & 0x7) << 3)
		   | ((rtt & 0x1) << 2));

	/* Write recovery */
	wr = ((dimm->tWR_ps + mclk_ps - 1) / mclk_ps) - 1;

	switch (popts->burst_length) {
	case DDR_BL4:
		bl = 2;
		break;
	case DDR_BL8:
		bl = 3;
		break;
	default:
		bl = 2;
		break;
	}

	/* SDRAM mode
	 * The variable also selects:
	 * - power down mode: fast exit (normal)
	 * - DLL reset disabled.
	 * - burst type: sequential
	 */
	sdmode = (((wr & 0x7) << 9)
		  | ((cas_latency & 0x7) << 4)
		  | ((bl & 0x7) << 0));

	ddr->ddr_sdram_mode = (((esdmode & 0xFFFF) << 16)
			       | ((sdmode & 0xFFFF) << 0));
}

void set_ddrx_sdram_mode(struct fsl_ddr_cfg_regs_s *ddr,
			       const struct memctl_options_s *popts,
			       const struct common_timing_params_s *dimm,
			       uint32_t cas_latency, uint32_t additive_latency)
{
	if (popts->sdram_type == SDRAM_TYPE_DDR2)
		set_ddr2_sdram_mode(ddr, popts, dimm, cas_latency,
				additive_latency);
	else
		set_ddr3_sdram_mode(ddr, popts, dimm, cas_latency,
				additive_latency);
}

uint32_t check_fsl_memctl_config_regs(const struct fsl_ddr_cfg_regs_s *ddr)
{
	/*
	 * DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN should not
	 * be set at the same time.
	 */
	if ((ddr->ddr_sdram_cfg & 0x10000000) &&
			(ddr->ddr_sdram_cfg & 0x00008000))
		return 1;

	return 0;
}

static void set_timing_cfg_4(struct fsl_ddr_cfg_regs_s *ddr,
		const struct memctl_options_s *popts)
{
	uint32_t rrt = 0, wwt = 0, dll_lock = 1;

	if (popts->burst_length != DDR_BL8)
		rrt = wwt = 2;

	ddr->timing_cfg_4 = (((rrt & 0xf) << 20)
			     | ((wwt & 0xf) << 16)
			     | (dll_lock & 0x3)
			     );
}

static void set_timing_cfg_5(struct fsl_ddr_cfg_regs_s *ddr,
				const struct memctl_options_s *popts,
				uint32_t cas_latency)
{
	uint32_t rodt_on, rodt_off = 4, wodt_on = 1, wodt_off = 4;

	/* rodt_on = timing_cfg_1[caslat] - timing_cfg_2[wrlat] + 1 */
	rodt_on = cas_latency - ((ddr->timing_cfg_2 & 0x00780000) >> 19) + 1;

	ddr->timing_cfg_5 = (((rodt_on & 0x1f) << 24)
			     | ((rodt_off & 0x7) << 20)
			     | ((wodt_on & 0x1f) << 12)
			     | ((wodt_off & 0x7) << 8)
			     );
}

static void set_ddr_zq_cntl(struct fsl_ddr_cfg_regs_s *ddr, uint32_t zq_en)
{
	uint32_t zqinit = 0, zqoper = 0, zqcs = 0;

	if (zq_en) {
		zqinit = 9;
		zqoper = 8;
		zqcs = 6;
	}

	ddr->ddr_zq_cntl = (((zq_en & 0x1) << 31)
			    | ((zqinit & 0xf) << 24)
			    | ((zqoper & 0xf) << 16)
			    | ((zqcs & 0xf) << 8)
			    );
}

static void set_ddr_wrlvl_cntl(struct fsl_ddr_cfg_regs_s *ddr,
		uint32_t wrlvl_en, const struct memctl_options_s *popts)
{
	uint32_t wrlvl_mrd = 0, wrlvl_odten = 0, wrlvl_dqsen = 0,
		 wrlvl_wlr = 0, wrlvl_start = 0, wrlvl_smpl = 0;

	/* Enable write leveling for DDR3 due to fly-by topology */
	if (wrlvl_en) {
		wrlvl_mrd = 0x6;
		wrlvl_odten = 0x7;
		wrlvl_dqsen = 0x5;
		/*
		 * Write leveling sample time at least need 6 clocks
		 * higher than tWLO to allow enough time for progagation
		 * delay and sampling the prime data bits.
		 */
		wrlvl_smpl = 0xf;
		/*
		 * Write leveling repetition time. At least tWLO + 6 clocks
		 * Set it to 64
		 */
		wrlvl_wlr = 0x6;
		/*
		 * Write leveling start time
		 * The value use for the DQS_ADJUST for the first sample
		 * when write leveling is enabled. It probably needs to be
		 * overriden per platform.
		 */
		wrlvl_start = 0x8;
		if (popts->wrlvl_override) {
			wrlvl_smpl = popts->wrlvl_sample;
			wrlvl_start = popts->wrlvl_start;
		}
	}

	ddr->ddr_wrlvl_cntl = (((wrlvl_en & 0x1) << 31)
			       | ((wrlvl_mrd & 0x7) << 24)
			       | ((wrlvl_odten & 0x7) << 20)
			       | ((wrlvl_dqsen & 0x7) << 16)
			       | ((wrlvl_smpl & 0xf) << 12)
			       | ((wrlvl_wlr & 0x7) << 8)
			       | ((wrlvl_start & 0x1f) << 0)
			       );
}

uint32_t
compute_fsl_memctl_config_regs(const struct memctl_options_s *popts,
			       struct fsl_ddr_cfg_regs_s *ddr,
			       const struct common_timing_params_s *dimm,
			       const struct dimm_params_s *dimmp,
			       uint32_t dbw_cap_adj)
{
	struct ddr_board_info_s *binfo = popts->board_info;
	uint32_t cas_latency, additive_latency, i, cs_per_dimm,
		 dimm_number, zq_en, wrlvl_en, sr_it = 0;
	uint64_t ea, sa, rank_density;

	if (dimm == NULL)
		return 1;

	memset(ddr, 0, sizeof(struct fsl_ddr_cfg_regs_s));

	/* Process overrides first.  */
	if (popts->cas_latency_override)
		cas_latency = popts->cas_latency_override_value;
	else
		cas_latency =  dimm->lowest_common_SPD_caslat;

	if (popts->additive_latency_override)
		additive_latency = popts->additive_latency_override_value;
	else
		additive_latency = dimm->additive_latency;

	if (popts->auto_self_refresh_en)
		sr_it = popts->sr_it;

	/* Chip Select Memory Bounds (CSn_BNDS) */
	for (i = 0; i < binfo->cs_per_ctrl; i++) {
		cs_per_dimm = binfo->cs_per_ctrl / binfo->dimm_slots_per_ctrl;
		dimm_number = i / cs_per_dimm;
		rank_density =
			dimmp[dimm_number].rank_density >> dbw_cap_adj;

		if (dimmp[dimm_number].n_ranks == 0)
			continue;

		sa = dimmp[dimm_number].base_address;
		ea = sa + rank_density - 1;
		if (dimmp[dimm_number].n_ranks > (i % cs_per_dimm)) {
			sa += (i % cs_per_dimm) * rank_density;
			ea += (i % cs_per_dimm) * rank_density;
		} else {
			sa = 0;
			ea = 0;
		}
		sa >>= 24;
		ea >>= 24;

		ddr->cs[i].bnds =
			(((sa & 0xffff) << 16) | ((ea & 0xffff) << 0));
		set_csn_config(dimm_number, i, ddr, popts, dimmp);
	}

	set_timing_cfg_0(ddr, popts, dimmp);
	set_timing_cfg_3(ddr, popts, dimm, cas_latency, additive_latency);
	set_timing_cfg_1(ddr, popts, dimm, cas_latency);
	set_timing_cfg_2(ddr, popts, dimm, cas_latency, additive_latency);

	ddr->ddr_cdr1 = popts->ddr_cdr1;
	ddr->ddr_cdr1 = popts->ddr_cdr2;

	set_ddr_sdram_cfg(ddr, popts, dimm);
	set_ddr_sdram_cfg_2(ddr, popts);
	set_ddrx_sdram_mode(ddr, popts, dimm, cas_latency, additive_latency);
	if (popts->sdram_type == SDRAM_TYPE_DDR3) {
		set_ddr_sdram_mode_2(ddr, popts, dimm);
		set_timing_cfg_4(ddr, popts);
		set_timing_cfg_5(ddr, popts, cas_latency);
		zq_en = (popts->zq_en) ? 1 : 0;
		set_ddr_zq_cntl(ddr, zq_en);
		wrlvl_en = (popts->wrlvl_en) ? 1 : 0;
		set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts);
	}
	set_ddr_sdram_interval(ddr, popts, dimm);

	ddr->ddr_data_init = popts->data_init;
	ddr->ddr_sdram_clk_cntl = (popts->clk_adjust & 0xF) << 23;

	ddr->ddr_sr_cntr = (sr_it & 0xf) << 16;

	return check_fsl_memctl_config_regs(ddr);
}