/* * (C) 2007 Pengutronix, Sascha Hauer * (C) 2009 Pengutronix, Juergen Beisert * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * Board support for Phytec's, i.MX35 based CPU card, called: PCM043 */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define CYG_MACRO_START #define CYG_MACRO_END #define ARM_MMU_FIRST_LEVEL_SECTION_ID 0x2 #define ARM_MMU_FIRST_LEVEL_DESCRIPTOR_ADDRESS(ttb_base, table_index) \ (unsigned long *)((unsigned long)(ttb_base) + ((table_index) << 2)) /* * Up to 32MiB NOR type flash, connected to * CS line 0, data width is 16 bit */ static struct device_d cfi_dev = { .name = "cfi_flash", .map_base = IMX_CS0_BASE, .size = 32 * 1024 * 1024, /* area size */ }; static struct fec_platform_data fec_info = { .xcv_type = MII100, }; static struct device_d fec_dev = { .name = "fec_imx", .map_base = IMX_FEC_BASE, .platform_data = &fec_info, }; static struct memory_platform_data ram_pdata = { .name = "ram0", .flags = DEVFS_RDWR, }; static struct device_d sdram0_dev = { .name = "mem", .map_base = IMX_SDRAM_CS0, .size = 128 * 1024 * 1024, .platform_data = &ram_pdata, }; struct imx_nand_platform_data nand_info = { .width = 1, .hw_ecc = 1, .flash_bbt = 1, }; static struct device_d nand_dev = { .name = "imx_nand", .map_base = IMX_NFC_BASE, .platform_data = &nand_info, }; static int imx35_devices_init(void) { uint32_t reg; /* CS0: Nor Flash */ writel(0x0000cf03, CSCR_U(0)); writel(0x10000d03, CSCR_L(0)); writel(0x00720900, CSCR_A(0)); reg = readl(IMX_CCM_BASE + CCM_RCSR); /* some fuses provide us vital information about connected hardware */ if (reg & 0x20000000) nand_info.width = 2; /* 16 bit */ else nand_info.width = 1; /* 8 bit */ register_device(&fec_dev); /* * This platform supports NOR and NAND */ register_device(&nand_dev); register_device(&cfi_dev); if ((reg & 0xc00) == 0x800) { /* reset mode: external boot */ switch ( (reg >> 25) & 0x3) { case 0x01: /* NAND is the source */ devfs_add_partition("nand0", 0x00000, 0x40000, PARTITION_FIXED, "self_raw"); dev_add_bb_dev("self_raw", "self0"); devfs_add_partition("nand0", 0x40000, 0x20000, PARTITION_FIXED, "env_raw"); dev_add_bb_dev("env_raw", "env0"); break; case 0x00: /* NOR is the source */ devfs_add_partition("nor0", 0x00000, 0x40000, PARTITION_FIXED, "self0"); /* ourself */ devfs_add_partition("nor0", 0x40000, 0x20000, PARTITION_FIXED, "env0"); /* environment */ protect_file("/dev/env0", 1); break; } } register_device(&sdram0_dev); armlinux_add_dram(&sdram0_dev); armlinux_set_bootparams((void *)0x80000100); armlinux_set_architecture(MACH_TYPE_PCM043); return 0; } device_initcall(imx35_devices_init); static struct device_d imx35_serial_device = { .name = "imx_serial", .map_base = IMX_UART1_BASE, .size = 16 * 1024, }; static struct pad_desc pcm043_pads[] = { MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, MX35_PAD_FEC_RX_DV__FEC_RX_DV, MX35_PAD_FEC_COL__FEC_COL, MX35_PAD_FEC_RDATA0__FEC_RDATA_0, MX35_PAD_FEC_TDATA0__FEC_TDATA_0, MX35_PAD_FEC_TX_EN__FEC_TX_EN, MX35_PAD_FEC_MDC__FEC_MDC, MX35_PAD_FEC_MDIO__FEC_MDIO, MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, MX35_PAD_FEC_CRS__FEC_CRS, MX35_PAD_FEC_RDATA0__FEC_RDATA_0, MX35_PAD_FEC_TDATA0__FEC_TDATA_0, MX35_PAD_FEC_RDATA1__FEC_RDATA_1, MX35_PAD_FEC_TDATA1__FEC_TDATA_1, MX35_PAD_FEC_RDATA2__FEC_RDATA_2, MX35_PAD_FEC_TDATA2__FEC_TDATA_2, MX35_PAD_FEC_RDATA3__FEC_RDATA_3, MX35_PAD_FEC_TDATA3__FEC_TDATA_3, MX35_PAD_RXD1__UART1_RXD_MUX, MX35_PAD_TXD1__UART1_TXD_MUX, MX35_PAD_RTS1__UART1_RTS, MX35_PAD_CTS1__UART1_CTS, MX35_PAD_I2C1_CLK__I2C1_SCL, MX35_PAD_I2C1_DAT__I2C1_SDA }; static int imx35_console_init(void) { mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); register_device(&imx35_serial_device); return 0; } console_initcall(imx35_console_init); static int pcm043_core_setup(void) { u32 tmp; /* AIPS setup - Only setup MPROTx registers. The PACR default values are good.*/ /* * Set all MPROTx to be non-bufferable, trusted for R/W, * not forced to user-mode. */ writel(0x77777777, IMX_AIPS1_BASE); writel(0x77777777, IMX_AIPS1_BASE + 0x4); writel(0x77777777, IMX_AIPS2_BASE); writel(0x77777777, IMX_AIPS2_BASE + 0x4); /* * Clear the on and off peripheral modules Supervisor Protect bit * for SDMA to access them. Did not change the AIPS control registers * (offset 0x20) access type */ writel(0x0, IMX_AIPS1_BASE + 0x40); writel(0x0, IMX_AIPS1_BASE + 0x44); writel(0x0, IMX_AIPS1_BASE + 0x48); writel(0x0, IMX_AIPS1_BASE + 0x4C); tmp = readl(IMX_AIPS1_BASE + 0x50); tmp &= 0x00FFFFFF; writel(tmp, IMX_AIPS1_BASE + 0x50); writel(0x0, IMX_AIPS2_BASE + 0x40); writel(0x0, IMX_AIPS2_BASE + 0x44); writel(0x0, IMX_AIPS2_BASE + 0x48); writel(0x0, IMX_AIPS2_BASE + 0x4C); tmp = readl(IMX_AIPS2_BASE + 0x50); tmp &= 0x00FFFFFF; writel(tmp, IMX_AIPS2_BASE + 0x50); /* MAX (Multi-Layer AHB Crossbar Switch) setup */ /* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */ #define MAX_PARAM1 0x00302154 writel(MAX_PARAM1, IMX_MAX_BASE + 0x0); /* for S0 */ writel(MAX_PARAM1, IMX_MAX_BASE + 0x100); /* for S1 */ writel(MAX_PARAM1, IMX_MAX_BASE + 0x200); /* for S2 */ writel(MAX_PARAM1, IMX_MAX_BASE + 0x300); /* for S3 */ writel(MAX_PARAM1, IMX_MAX_BASE + 0x400); /* for S4 */ /* SGPCR - always park on last master */ writel(0x10, IMX_MAX_BASE + 0x10); /* for S0 */ writel(0x10, IMX_MAX_BASE + 0x110); /* for S1 */ writel(0x10, IMX_MAX_BASE + 0x210); /* for S2 */ writel(0x10, IMX_MAX_BASE + 0x310); /* for S3 */ writel(0x10, IMX_MAX_BASE + 0x410); /* for S4 */ /* MGPCR - restore default values */ writel(0x0, IMX_MAX_BASE + 0x800); /* for M0 */ writel(0x0, IMX_MAX_BASE + 0x900); /* for M1 */ writel(0x0, IMX_MAX_BASE + 0xa00); /* for M2 */ writel(0x0, IMX_MAX_BASE + 0xb00); /* for M3 */ writel(0x0, IMX_MAX_BASE + 0xc00); /* for M4 */ writel(0x0, IMX_MAX_BASE + 0xd00); /* for M5 */ writel(0x0000DCF6, CSCR_U(0)); /* CS0: NOR Flash */ writel(0x444A4541, CSCR_L(0)); writel(0x44443302, CSCR_A(0)); /* * M3IF Control Register (M3IFCTL) * MRRP[0] = L2CC0 not on priority list (0 << 0) = 0x00000000 * MRRP[1] = MAX1 not on priority list (0 << 0) = 0x00000000 * MRRP[2] = L2CC1 not on priority list (0 << 0) = 0x00000000 * MRRP[3] = USB not on priority list (0 << 0) = 0x00000000 * MRRP[4] = SDMA not on priority list (0 << 0) = 0x00000000 * MRRP[5] = GPU not on priority list (0 << 0) = 0x00000000 * MRRP[6] = IPU1 on priority list (1 << 6) = 0x00000040 * MRRP[7] = IPU2 not on priority list (0 << 0) = 0x00000000 * ------------ * 0x00000040 */ writel(0x40, IMX_M3IF_BASE); return 0; } core_initcall(pcm043_core_setup); #define MPCTL_PARAM_399 (IMX_PLL_PD(0) | IMX_PLL_MFD(15) | IMX_PLL_MFI(8) | IMX_PLL_MFN(5)) #define MPCTL_PARAM_532 ((1 << 31) | IMX_PLL_PD(0) | IMX_PLL_MFD(11) | IMX_PLL_MFI(11) | IMX_PLL_MFN(1)) static int do_cpufreq(cmd_tbl_t *cmdtp, int argc, char *argv[]) { unsigned long freq; if (argc != 2) return COMMAND_ERROR_USAGE; freq = simple_strtoul(argv[1], NULL, 0); switch (freq) { case 399: writel(MPCTL_PARAM_399, IMX_CCM_BASE + CCM_MPCTL); break; case 532: writel(MPCTL_PARAM_532, IMX_CCM_BASE + CCM_MPCTL); break; default: return COMMAND_ERROR_USAGE; } printf("Switched CPU frequency to %dMHz\n", freq); return 0; } static const __maybe_unused char cmd_cpufreq_help[] = "Usage: cpufreq 399|532\n" "\n" "Set CPU frequency to MHz\n"; U_BOOT_CMD_START(cpufreq) .cmd = do_cpufreq, .usage = "adjust CPU frequency", U_BOOT_CMD_HELP(cmd_cpufreq_help) U_BOOT_CMD_END #ifdef CONFIG_NAND_IMX_BOOT void __bare_init nand_boot(void) { /* * The driver is able to detect NAND's pagesize by CPU internal * fuses or external pull ups. But not the blocksize... */ imx_nand_load_image((void *)TEXT_BASE, 256 * 1024); } #endif