config ARCH_HAS_FEC_IMX bool config HAS_AT91_ETHER bool config HAS_CS8900 bool config HAS_DM9000 bool config HAS_MACB bool config PHYLIB bool menu "Network drivers" depends on NET config DRIVER_NET_AR231X bool "AR231X Ethernet support" depends on MACH_MIPS_AR231X select PHYLIB help Support for the AR231x/531x ethernet controller config DRIVER_NET_ARC_EMAC bool "ARC Ethernet MAC driver" depends on HAS_DMA && 32BIT select PHYLIB help This option enables support for the ARC EMAC ethernet controller. config DRIVER_NET_AT91_ETHER bool "at91 ethernet driver" depends on HAS_AT91_ETHER select PHYLIB config DRIVER_NET_CS8900 bool "cs8900 ethernet driver" depends on HAS_CS8900 || COMPILE_TEST config DRIVER_NET_CPSW bool "CPSW ethernet driver" depends on ARCH_OMAP select PHYLIB config DRIVER_NET_DAVINCI_EMAC bool "TI Davinci/OMAP EMAC ethernet driver" depends on ARCH_OMAP3 select PHYLIB config DRIVER_NET_DESIGNWARE bool "Designware Universal MAC1000 ethernet platform support" depends on HAS_DMA select PHYLIB help This option enables support for the Synopsys Designware Core Univesal MAC 10M/100M/1G ethernet IP. if DRIVER_NET_DESIGNWARE config DRIVER_NET_DESIGNWARE_GENERIC bool "Designware Universal MAC ethernet generic driver" help This option enables support for the Synopsys Designware Core Univesal MAC 10M/100M/1G ethernet IP on SoCFPGA. config DRIVER_NET_DESIGNWARE_SOCFPGA bool "Designware Universal MAC ethernet driver for SoCFPGA platforms" depends on ARCH_SOCFPGA || COMPILE_TEST select MFD_SYSCON select RESET_CONTROLLER help This option enables support for the Synopsys Designware Core Univesal MAC 10M/100M/1G ethernet IP on SoCFPGA. config DRIVER_NET_DESIGNWARE_STARFIVE bool "Designware Universal MAC ethernet driver for StarFive platforms" depends on SOC_STARFIVE || COMPILE_TEST select MFD_SYSCON help This option enables support for the Synopsys Designware Core Univesal MAC 10M/100M/1G ethernet IP on StarFive. endif config DRIVER_NET_DESIGNWARE_EQOS bool "Designware Designware Ethernet QoS support" depends on HAS_DMA depends on COMMON_CLK depends on OFTREE select PHYLIB help This option enables support for the Synopsys Designware Ethernet Quality-of-Service (GMAC4). if DRIVER_NET_DESIGNWARE_EQOS config DRIVER_NET_DESIGNWARE_STM32 bool "Designware EQOS STM32 driver" select MFD_SYSCON help This option enables support for the ethernet MAC on the STM32MP platforms. config DRIVER_NET_DESIGNWARE_TEGRA186 bool "Designware Universal MAC ethernet driver for Tegra 186 platforms" select RESET_CONTROLLER help This option enables support for the ethernet MAC on the Tegra186 & 194. config DRIVER_NET_DESIGNWARE_ROCKCHIP bool "Designware Universal MAC ethernet driver for Rockchip platforms" select MFD_SYSCON help This option enables support for the ethernet MAC on different Rockchip SoCs endif config DRIVER_NET_DM9K bool "Davicom dm9k[E|A|B] ethernet driver" depends on HAS_DM9000 || COMPILE_TEST select PHYLIB config DRIVER_NET_E1000 bool "Intel e1000 ethernet driver" depends on PCI depends on HAS_DMA select PHYLIB help This is a driver for the Gigabit Ethernet PCI network cards based on the Intel e1000 chips. config DRIVER_NET_ENC28J60 bool "ENC28J60 support" depends on SPI select PHYLIB help Support for the Microchip EN28J60 ethernet chip. config DRIVER_NET_ENC28J60_WRITEVERIFY bool "Enable write verify" depends on DRIVER_NET_ENC28J60 help Enable the verify after the buffer write useful for debugging purpose. If unsure, say N. config DRIVER_NET_EP93XX bool "EP93xx Ethernet driver" depends on ARCH_EP93XX select PHYLIB config DRIVER_NET_ETHOC bool "OpenCores ethernet MAC driver" depends on OPENRISC depends on HAS_CACHE select PHYLIB help This option enables support for the OpenCores 10/100 Mbps Ethernet MAC core. config DRIVER_NET_FEC_IMX bool "i.MX FEC Ethernet driver" depends on ARCH_HAS_FEC_IMX || COMPILE_TEST depends on HAS_DMA select PHYLIB config DRIVER_NET_FSL_FMAN bool "Freescale fman ethernet driver" select PHYLIB select FSL_QE_FIRMWARE help This option enabled support for the Freescale fman core found on Layerscape SoCs. config DRIVER_NET_GIANFAR bool "Gianfar Ethernet" depends on ARCH_MPC85XX select PHYLIB config DRIVER_NET_KS8851_MLL bool "ks8851 mll ethernet driver" select PHYLIB help This option enables support for the Micrel KS8851 MLL ethernet chip. config DRIVER_NET_MACB bool "macb Ethernet driver" depends on HAS_MACB || COMPILE_TEST depends on HAS_DMA select PHYLIB config DRIVER_NET_MICREL depends on SPI bool "Micrel KSZ8864RMN Ethernet Switch driver" help This option enables support for enabling the Micrel KSZ8864RMN Ethernet Switch over SPI. config DRIVER_NET_MPC5200 bool "MPC5200 Ethernet driver" depends on ARCH_MPC5200 select PHYLIB config DRIVER_NET_MVNETA bool "Marvell NETA" depends on ARCH_MVEBU select PHYLIB select MDIO_MVEBU config DRIVER_NET_ORION bool "Marvell Orion SoC Ethernet" depends on ARCH_MVEBU select PHYLIB select MDIO_MVEBU config DRIVER_NET_RTL8139 bool "RealTek RTL-8139 PCI Ethernet driver" depends on PCI depends on MIPS select PHYLIB help This is a driver for the Fast Ethernet PCI network cards based on the RTL 8139 chips. config DRIVER_NET_RTL8169 bool "RealTek RTL-8169 PCI Ethernet driver" depends on PCI depends on HAS_DMA select PHYLIB help This is a driver for the Fast Ethernet PCI network cards based on the RTL 8169 chips. config DRIVER_NET_SMC911X bool "smc911x ethernet driver" select PHYLIB help This option enables support for the SMSC LAN9[12]1[567] ethernet chip. config DRIVER_NET_SMC91111 bool "smc91111 ethernet driver" select PHYLIB help This option enables support for the SMSC LAN91C111 ethernet chip. config DRIVER_NET_TAP bool "tap Ethernet driver" depends on SANDBOX config DRIVER_NET_EFI_SNP bool "EFI SNP ethernet driver" depends on EFI_BOOTUP config DRIVER_NET_VIRTIO bool "virtio net driver" depends on VIRTIO help This is the virtual net driver for virtio. It can be used with QEMU based targets. config DRIVER_NET_AG71XX bool "Atheros AG71xx ethernet driver" depends on MACH_MIPS_ATH79 select PHYLIB help This option enables support for Atheros AG71XX ethernet chip. config DRIVER_NET_TSE depends on NIOS2 bool "Altera TSE ethernet driver" select PHYLIB help This option enables support for the Altera TSE MAC. config TSE_USE_DEDICATED_DESC_MEM depends on DRIVER_NET_TSE bool "Altera TSE uses dedicated descriptor memory" help This option tells the TSE driver to use an onchip memory to store SGDMA descriptors. Descriptor memory is not reserved with a malloc but directly mapped to the memory address (defined in config.h) source "drivers/net/phy/Kconfig" source "drivers/net/usb/Kconfig" endmenu