* Clock bindings for Freescale i.MX23 Required properties: - compatible: Should be "fsl,imx23-clkctrl" - reg: Address and length of the register set - #clock-cells: Should be <1> The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. The following is a full list of i.MX23 clocks and IDs. Clock ID ------------------ ref_xtal 0 pll 1 ref_cpu 2 ref_emi 3 ref_pix 4 ref_io 5 saif_sel 6 lcdif_sel 7 gpmi_sel 8 ssp_sel 9 emi_sel 10 cpu 11 etm_sel 12 cpu_pll 13 cpu_xtal 14 hbus 15 xbus 16 lcdif_div 17 ssp_div 18 gpmi_div 19 emi_pll 20 emi_xtal 21 etm_div 22 saif_div 23 clk32k_div 24 rtc 25 adc 26 spdif_div 27 clk32k 28 dri 29 pwm 30 filt 31 uart 32 ssp 33 gpmi 34 spdif 35 emi 36 saif 37 lcdif 38 etm 39 usb 40 usb_phy 41 Examples: clks: clkctrl@80040000 { compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; auart0: serial@8006c000 { compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; clocks = <&clks 32>; };