* Clock bindings for Freescale i.MX27 Required properties: - compatible: Should be "fsl,imx27-ccm" - reg: Address and length of the register set - interrupts: Should contain CCM interrupt - #clock-cells: Should be <1> The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h for the full list of i.MX27 clock IDs. Examples: clks: ccm@10027000{ compatible = "fsl,imx27-ccm"; reg = <0x10027000 0x1000>; #clock-cells = <1>; }; uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; interrupts = <20>; clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; };