* Clock bindings for NXP i.MX8M Mini Required properties: - compatible: Should be "fsl,imx8mm-ccm" - reg: Address and length of the register set - #clock-cells: Should be <1> - clocks: list of clock specifiers, must contain an entry for each required entry in clock-names - clock-names: should include the following entries: - "osc_32k" - "osc_24m" - "clk_ext1" - "clk_ext2" - "clk_ext3" - "clk_ext4" clk: clock-controller@30380000 { compatible = "fsl,imx8mm-ccm"; reg = <0x0 0x30380000 0x0 0x10000>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; }; The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mm-clock.h for the full list of i.MX8M Mini clock IDs.