Parallel to LVDS Encoder ------------------------ This binding supports the parallel to LVDS encoders that don't require any configuration. LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple incompatible data link layers have been used over time to transmit image data to LVDS panels. This binding targets devices compatible with the following specifications only. [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February 1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA) [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National Semiconductor [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video Electronics Standards Association (VESA) Those devices have been marketed under the FPD-Link and FlatLink brand names among others. Required properties: - compatible: Must be one or more of the following - "ti,ds90c185" for the TI DS90C185 FPD-Link Serializer - "lvds-encoder" for a generic LVDS encoder device When compatible with the generic version, nodes must list the device-specific version corresponding to the device first followed by the generic version. Required nodes: This device has two video ports. Their connections are modeled using the OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - Video port 0 for parallel input - Video port 1 for LVDS output Example ------- lvds-encoder { compatible = "lvds-encoder"; #address-cells = <1>; #size-cells = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; lvds_enc_in: endpoint { remote-endpoint = <&display_out_rgb>; }; }; port@1 { reg = <1>; lvds_enc_out: endpoint { remote-endpoint = <&lvds_panel_in>; }; }; }; };