PXA LCD Controller ------------------ Required properties: - compatible : one of these "marvell,pxa2xx-lcdc", "marvell,pxa270-lcdc", "marvell,pxa300-lcdc" - reg : should contain 1 register range (address and length). - interrupts : framebuffer controller interrupt. - clocks: phandle to input clocks Required nodes: - port: connection to the LCD panel (see video-interfaces.txt) This node must have its properties bus-width and remote-endpoint set. If the panel is not a TFT color panel, then a "lcd-type" property in the panel should specify the panel type. This panel node should be in the board dts. Example: lcd-controller@40500000 { compatible = "marvell,pxa2xx-lcdc"; reg = <0x44000000 0x10000>; interrupts = <17>; clocks = <&clks CLK_LCD>; port { lcdc_out: endpoint { remote-endpoint = <&panel_in>; bus-width = <16>; }; }; };