* Freescale MXS LCD Interface (LCDIF) New bindings: ============= Required properties: - compatible: Should be "fsl,imx23-lcdif" for i.MX23. Should be "fsl,imx28-lcdif" for i.MX28. Should be "fsl,imx6sx-lcdif" for i.MX6SX. - reg: Address and length of the register set for LCDIF - interrupts: Should contain LCDIF interrupt - clocks: A list of phandle + clock-specifier pairs, one for each entry in 'clock-names'. - clock-names: A list of clock names. For MXSFB it should contain: - "pix" for the LCDIF block clock - (MX6SX-only) "axi", "disp_axi" for the bus interface clock Required sub-nodes: - port: The connection to an encoder chip. Example: lcdif1: display-controller@2220000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; clock-names = "pix", "axi", "disp_axi"; port { parallel_out: endpoint { remote-endpoint = <&panel_in_parallel>; }; }; }; Deprecated bindings: ==================== Required properties: - compatible: Should be "fsl,imx23-lcdif" for i.MX23. Should be "fsl,imx28-lcdif" for i.MX28. - reg: Address and length of the register set for LCDIF - interrupts: Should contain LCDIF interrupts - display: phandle to display node (see below for details) * display node Required properties: - bits-per-pixel: <16> for RGB565, <32> for RGB888/666. - bus-width: number of data lines. Could be <8>, <16>, <18> or <24>. Required sub-node: - display-timings: Refer to binding doc display-timing.txt for details. Examples: lcdif@80030000 { compatible = "fsl,imx28-lcdif"; reg = <0x80030000 2000>; interrupts = <38 86>; display: display { bits-per-pixel = <32>; bus-width = <24>; display-timings { native-mode = <&timing0>; timing0: timing0 { clock-frequency = <33500000>; hactive = <800>; vactive = <480>; hfront-porch = <164>; hback-porch = <89>; hsync-len = <10>; vback-porch = <23>; vfront-porch = <10>; vsync-len = <10>; hsync-active = <0>; vsync-active = <0>; de-active = <1>; pixelclk-active = <0>; }; }; }; };