Sitronix ST7586 display panel Required properties: - compatible: "lego,ev3-lcd". - a0-gpios: The A0 signal (since this binding is for serial mode, this is the pin labeled D1 on the controller, not the pin labeled A0) - reset-gpios: Reset pin The node for this driver must be a child node of a SPI controller, hence all mandatory properties described in ../spi/spi-bus.txt must be specified. Optional properties: - rotation: panel rotation in degrees counter clockwise (0,90,180,270) Example: display@0{ compatible = "lego,ev3-lcd"; reg = <0>; spi-max-frequency = <10000000>; a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>; };