* PTN5150 CC (Configuration Channel) Logic device PTN5150 is a small thin low power CC logic chip supporting the USB Type-C connector application with CC control logic detection and indication functions. It is interfaced to the host controller using an I2C interface. Required properties: - compatible: should be "nxp,ptn5150" - reg: specifies the I2C slave address of the device - int-gpio: should contain a phandle and GPIO specifier for the GPIO pin connected to the PTN5150's INTB pin. - vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which is used to control VBUS. - pinctrl-names : a pinctrl state named "default" must be defined. - pinctrl-0 : phandle referencing pin configuration of interrupt and vbus control. Example: ptn5150@1d { compatible = "nxp,ptn5150"; reg = <0x1d>; int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>; vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ptn5150_default>; status = "okay"; };