# SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Bindings for GPIO bitbanged I2C maintainers: - Wolfram Sang allOf: - $ref: /schemas/i2c/i2c-controller.yaml# properties: compatible: items: - const: i2c-gpio sda-gpios: description: gpio used for the sda signal, this should be flagged as active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) from since the signal is by definition open drain. maxItems: 1 scl-gpios: description: gpio used for the scl signal, this should be flagged as active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) from since the signal is by definition open drain. maxItems: 1 i2c-gpio,scl-output-only: description: scl as output only type: boolean i2c-gpio,delay-us: description: delay between GPIO operations (may depend on each platform) $ref: /schemas/types.yaml#/definitions/uint32 i2c-gpio,timeout-ms: description: timeout to get data $ref: /schemas/types.yaml#/definitions/uint32 # Deprecated properties, do not use in new device tree sources: gpios: minItems: 2 maxItems: 2 description: sda and scl gpio, alternative for {sda,scl}-gpios i2c-gpio,sda-open-drain: # Generate a warning if present not: true description: this means that something outside of our control has put the GPIO line used for SDA into open drain mode, and that something is not the GPIO chip. It is essentially an inconsistency flag. i2c-gpio,scl-open-drain: # Generate a warning if present not: true description: this means that something outside of our control has put the GPIO line used for SCL into open drain mode, and that something is not the GPIO chip. It is essentially an inconsistency flag. required: - compatible - sda-gpios - scl-gpios ...