# SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP PCA954x I2C and compatible bus switches maintainers: - Laurent Pinchart description: The NXP PCA954x and compatible devices are I2C bus multiplexer/switches that share the same functionality and register layout. The devices usually have 4 or 8 child buses, which are attached to the parent bus by using the SMBus "Send Byte" command. properties: compatible: oneOf: - enum: - maxim,max7356 - maxim,max7357 - maxim,max7358 - maxim,max7367 - maxim,max7368 - maxim,max7369 - nxp,pca9540 - nxp,pca9542 - nxp,pca9543 - nxp,pca9544 - nxp,pca9545 - nxp,pca9546 - nxp,pca9547 - nxp,pca9548 - nxp,pca9846 - nxp,pca9847 - nxp,pca9848 - nxp,pca9849 - items: - const: nxp,pca9646 - const: nxp,pca9546 reg: maxItems: 1 interrupts: maxItems: 1 "#interrupt-cells": const: 2 interrupt-controller: true reset-gpios: maxItems: 1 i2c-mux-idle-disconnect: type: boolean description: Forces mux to disconnect all children in idle state. This is necessary for example, if there are several multiplexers on the bus and the devices behind them use same I2C addresses. idle-state: description: if present, overrides i2c-mux-idle-disconnect $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state vdd-supply: description: A voltage regulator supplying power to the chip. On PCA9846 the regulator supplies power to VDD2 (core logic) and optionally to VDD1. required: - compatible - reg allOf: - $ref: /schemas/i2c/i2c-mux.yaml# - if: not: properties: compatible: contains: enum: - maxim,max7367 - maxim,max7369 - nxp,pca9542 - nxp,pca9543 - nxp,pca9544 - nxp,pca9545 then: properties: interrupts: false "#interrupt-cells": false interrupt-controller: false unevaluatedProperties: false examples: - | #include i2c { #address-cells = <1>; #size-cells = <0>; i2c-mux@74 { compatible = "nxp,pca9545"; #address-cells = <1>; #size-cells = <0>; reg = <0x74>; vdd-supply = <&p3v3>; interrupt-parent = <&ipic>; interrupts = <17 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; eeprom@54 { compatible = "atmel,24c08"; reg = <0x54>; }; }; i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; }; }; }; ...