* Device tree bindings for the Qualcomm MSM vibrator Required properties: - compatible: Should be one of "qcom,msm8226-vibrator" "qcom,msm8974-vibrator" - reg: the base address and length of the IO memory for the registers. - pinctrl-names: set to default. - pinctrl-0: phandles pointing to pin configuration nodes. See Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - clock-names: set to pwm - clocks: phandle of the clock. See Documentation/devicetree/bindings/clock/clock-bindings.txt - enable-gpios: GPIO that enables the vibrator. Optional properties: - vcc-supply: phandle to the regulator that provides power to the sensor. Example from a LG Nexus 5 (hammerhead) phone: vibrator@fd8c3450 { reg = <0xfd8c3450 0x400>; compatible = "qcom,msm8974-vibrator"; vcc-supply = <&pm8941_l19>; clocks = <&mmcc CAMSS_GP1_CLK>; clock-names = "pwm"; enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vibrator_pin>; };