* NXP - pca955x LED driver The PCA955x family of chips are I2C LED blinkers whose pins not used to control LEDs can be used as general purpose I/Os. The GPIO pins can be input or output, and output pins can also be pulse-width controlled. Required properties: - compatible : should be one of : "nxp,pca9550" "nxp,pca9551" "nxp,pca9552" "nxp,pca9553" - #address-cells: must be 1 - #size-cells: must be 0 - reg: I2C slave address. depends on the model. Optional properties: - gpio-controller: allows pins to be used as GPIOs. - #gpio-cells: must be 2. - gpio-line-names: define the names of the GPIO lines LED sub-node properties: - reg : number of LED line. from 0 to 1 for the pca9550 from 0 to 7 for the pca9551 from 0 to 15 for the pca9552 from 0 to 3 for the pca9553 - type: (optional) either PCA9532_TYPE_NONE PCA9532_TYPE_LED PCA9532_TYPE_GPIO see dt-bindings/leds/leds-pca955x.h (default to LED) - label : (optional) see Documentation/devicetree/bindings/leds/common.txt - linux,default-trigger : (optional) see Documentation/devicetree/bindings/leds/common.txt Examples: pca9552: pca9552@60 { compatible = "nxp,pca9552"; #address-cells = <1>; #size-cells = <0>; reg = <0x60>; gpio-controller; #gpio-cells = <2>; gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15"; gpio@12 { reg = <12>; type = ; }; gpio@13 { reg = <13>; type = ; }; gpio@14 { reg = <14>; type = ; }; gpio@15 { reg = <15>; type = ; }; led@0 { label = "red:power"; linux,default-trigger = "default-on"; reg = <0>; type = ; }; led@1 { label = "green:power"; reg = <1>; type = ; }; led@2 { label = "pca9552:yellow"; reg = <2>; type = ; }; led@3 { label = "pca9552:white"; reg = <3>; type = ; }; };