* Analog Devices ADP1653 flash LED driver Required Properties: - compatible: Must contain "adi,adp1653" - reg: I2C slave address - enable-gpios: Specifier of the GPIO connected to EN pin There are two LED outputs available - flash and indicator. One LED is represented by one child node, nodes need to be named "flash" and "indicator". Required properties of the LED child node: - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt Required properties of the flash LED child node: - flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt Example: adp1653: led-controller@30 { compatible = "adi,adp1653"; reg = <0x30>; enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ flash { flash-timeout-us = <500000>; flash-max-microamp = <320000>; led-max-microamp = <50000>; }; indicator { led-max-microamp = <17500>; }; };